Scandinavia - Lathes for Removing Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingScandinavia: Market for Lathes For Removing Metal 2024
Market Size for Lathes For Removing Metal in Scandinavia
The Scandinavia lathe for removing metal market was finally on the rise to reach $X in 2022, after two years of decline. Over the period under review, consumption, however, saw a noticeable decline. Over the period under review, the market reached the maximum level at $X in 2012; however, from 2013 to 2022, consumption remained at a lower figure.
Production of Lathes For Removing Metal in Scandinavia
In value terms, lathe for removing metal production shrank to $X in 2022 estimated in export price. Over the period under review, production, however, saw a deep setback. The most prominent rate of growth was recorded in 2021 when the production volume increased by X% against the previous year. Over the period under review, lafor removing metal production hit record highs at $X in 2012; however, from 2013 to 2022, production failed to regain momentum.
Exports of Lathes For Removing Metal
Exports in Scandinavia
In 2022, approx. X units of lathes for removing metal were exported in Scandinavia; which is down by X% on 2021. Over the period under review, exports saw a abrupt decrease. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. As a result, the exports attained the peak of X units, and then contracted notably in the following year.
In value terms, lathe for removing metal exports fell to $X in 2022. In general, exports continue to indicate a perceptible descent. The most prominent rate of growth was recorded in 2021 when exports increased by X%. The level of export peaked at $X in 2012; however, from 2013 to 2022, the exports failed to regain momentum.
Exports by Country
Sweden was the largest exporter of lathes for removing metal in Scandinavia, with the volume of exports resulting at X units, which was near X% of total exports in 2022. Norway (X units) held the second position in the ranking, followed by Finland (X units). All these countries together held near X% share of total exports.
Exports from Sweden decreased at an average annual rate of X% from 2012 to 2022. At the same time, Finland (X%) displayed positive paces of growth. Moreover, Finland emerged as the fastest-growing exporter exported in Scandinavia, with a CAGR of X% from 2012-2022. Norway experienced a relatively flat trend pattern. Finland (X p.p.) and Norway (X p.p.) significantly strengthened its position in terms of the total exports, while Sweden saw its share reduced by X% from 2012 to 2022, respectively.
In value terms, the largest lathe for removing metal supplying countries in Scandinavia were Sweden ($X), Norway ($X) and Finland ($X).
Finland, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, among the main exporting countries over the period under review, while shipments for the other leaders experienced a decline in the exports figures.
Export Prices by Country
In 2022, the export price in Scandinavia amounted to $X per unit, growing by X% against the previous year. Export price indicated notable growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The level of export peaked at $X per unit in 2013; however, from 2014 to 2022, the export prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Norway ($X per unit), while Finland ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Sweden (X%), while the other leaders experienced a decline in the export price figures.
Imports of Lathes For Removing Metal
Imports in Scandinavia
In 2022, overseas purchases of lathes for removing metal increased by X% to X units, rising for the second consecutive year after two years of decline. Over the period under review, imports, however, saw a abrupt slump. The pace of growth appeared the most rapid in 2018 with an increase of X%. Over the period under review, lafor removing metal imports attained the peak figure at X units in 2012; however, from 2013 to 2022, imports remained at a lower figure.
In value terms, lathe for removing metal imports expanded notably to $X in 2022. Overall, imports, however, recorded a pronounced curtailment. The most prominent rate of growth was recorded in 2018 with an increase of X%. Over the period under review, lafor removing metal imports reached the maximum at $X in 2012; however, from 2013 to 2022, imports failed to regain momentum.
Imports by Country
Sweden (X units) and Norway (X units) represented the key importers of lathes for removing metal in 2022, amounting to near X% and X% of total imports, respectively. It was distantly followed by Finland (X units), mixing up a X% share of total imports.
From 2012 to 2022, the biggest increases were recorded for Finland (with a CAGR of X%), while purchases for the other leaders experienced a decline in the imports figures.
In value terms, Sweden ($X) constitutes the largest market for imported lathes for removing metal in Scandinavia, comprising X% of total imports. The second position in the ranking was held by Finland ($X), with a X% share of total imports.
In Sweden, lathe for removing metal imports plunged by an average annual rate of X% over the period from 2012-2022. The remaining importing countries recorded the following average annual rates of imports growth: Finland (X% per year) and Norway (X% per year).
Import Prices by Country
The import price in Scandinavia stood at $X per unit in 2022, standing approx. at the previous year. Import price indicated tangible growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, lathe for removing metal import price increased by X% against 2020 indices. The growth pace was the most rapid in 2018 when the import price increased by X% against the previous year. The level of import peaked at $X per unit in 2019; however, from 2020 to 2022, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Sweden ($X per unit), while Norway ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Finland (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for lathe for removing metal in Scandinavia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28412123 - Numerically controlled horizontal lathes, turning centres, for removing metal
- Prodcom 28412127 - Numerically controlled horizontal lathes, automatic lathes, for removing metal (excluding turning centres)
- Prodcom 28412129 - Numerically controlled horizontal lathes, for removing metal (excluding turning centres, automatic lathes)
- Prodcom 28412140 - Non-numerically controlled horizontal lathes, for removing metal
- Prodcom 28412160 - Lathes, including turning centres, for removing metal (excluding horizontal lathes)
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Scandinavia, split by region and country
- Trade (exports and imports) in Scandinavia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Finland
- Norway
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for lathe for removing metal in Asia.
This report provides an in-depth analysis of the market for lathe for removing metal in the U.S..
This report provides an in-depth analysis of the market for lathe for removing metal in China.
This report provides an in-depth analysis of the market for lathe for removing metal in the EU.
This report provides an in-depth analysis of the global market for lathe for removing metal.
- Lathe for Removing Metal Market
- Machine-Tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-Station Transfer Machine Market
- Non-Numerically Controlled Lathe Market
- Way-Type Unit Head Market
- Numerically Controlled Drilling Machine Market
- Non-Numerically Controlled Drilling Machine Market
- Numerically Controlled Knee-Type Milling Machine Market