Latest Report Update: May 30, 2021

Sweden - Lathes For Removing Metal - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service, Privacy Policy and Licenses. We'll occasionally send you account related emails.

Sweden: Overview of the Market for Lathes For Removing Metal 2021

Market Size for Lathes For Removing Metal in Sweden

After four years of growth, the Swedish lathe for removing metal market decreased by -X% to $X in 2020. Over the period under review, consumption, however, showed a drastic downturn. The pace of growth appeared the most rapid in 2016 with an increase of X% year-to-year. Over the period under review, the market hit record highs at $X in 2008; however, from 2009 to 2020, consumption remained at a lower figure.

Production of Lathes For Removing Metal in Sweden

In value terms, lathe for removing metal production plummeted to $X in 2020 estimated in export prices. In general, production, however, continues to indicate a deep contraction. The pace of growth was the most pronounced in 2008 when the production volume increased by X% y-o-y. As a result, production attained the peak level of $X. From 2009 to 2020, production growth failed to regain the momentum.

Exports of Lathes For Removing Metal

Exports from Sweden

In 2020, exports of lathes for removing metal from Sweden contracted sharply to X units, declining by -X% on the year before. Overall, exports faced a deep setback. The pace of growth appeared the most rapid in 2011 with an increase of X% against the previous year. Exports peaked at X units in 2008; however, from 2009 to 2020, exports stood at a somewhat lower figure.

In value terms, lathe for removing metal exports declined sharply to $X in 2020. Over the period under review, exports recorded a deep setback. The pace of growth was the most pronounced in 2011 when exports increased by X% against the previous year. Over the period under review, lafor removing metal exports reached the maximum at $X in 2008; however, from 2009 to 2020, exports failed to regain the momentum.

Exports by Country

Norway (X units) was the main destination for lathe for removing metal exports from Sweden, accounting for a X% share of total exports. Moreover, lathe for removing metal exports to Norway exceeded the volume sent to the second major destination, Switzerland (X units), twofold. The third position in this ranking was occupied by Latvia (X units), with a X% share.

From 2007 to 2020, the average annual growth rate of volume to Norway totaled -X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Switzerland (+X% per year) and Latvia (-X% per year).

In value terms, Germany ($X) remains the key foreign market for lathe for removing metal exports from Sweden, comprising X% of total exports. The second position in the ranking was occupied by Latvia ($X), with a X% share of total exports. It was followed by Norway, with a X% share.

From 2007 to 2020, the average annual growth rate of value to Germany totaled -X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Latvia (-X% per year) and Norway (-X% per year).

Export Prices by Country

In 2020, the average lathe for removing metal export price amounted to $X per unit, falling by -X% against the previous year. In general, the export price, however, posted resilient growth. The pace of growth appeared the most rapid in 2019 an increase of X% year-to-year. As a result, export price attained the peak level of $X per unit, and then reduced in the following year.

There were significant differences in the average prices for the major external markets. In 2020, the country with the highest price was Germany ($X per unit), while the average price for exports to Chile ($X per unit) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to Bosnia and Herzegovina, while the prices for the other major destinations experienced more modest paces of growth.

Imports of Lathes For Removing Metal

Imports into Sweden

In 2020, purchases abroad of lathes for removing metal decreased by -X% to X units, falling for the third year in a row after two years of growth. In general, imports saw a abrupt descent. The pace of growth appeared the most rapid in 2011 when imports increased by X% against the previous year. Imports peaked at X units in 2008; however, from 2009 to 2020, imports stood at a somewhat lower figure.

In value terms, lathe for removing metal imports shrank dramatically to $X in 2020. Over the period under review, imports continue to indicate a deep setback. The pace of growth appeared the most rapid in 2011 when imports increased by X% y-o-y. Over the period under review, lafor removing metal imports attained the maximum at $X in 2008; however, from 2009 to 2020, imports remained at a lower figure.

Imports by Country

In 2020, Germany (X units) constituted the largest supplier of lathe for removing metal to Sweden, accounting for a X% share of total imports. Moreover, lathe for removing metal imports from Germany exceeded the figures recorded by the second-largest supplier, Japan (X units), threefold. The UK (X units) ranked third in terms of total imports with a X% share.

From 2007 to 2020, the average annual growth rate of volume from Germany totaled -X%. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (-X% per year) and the UK (-X% per year).

In value terms, Germany ($X), Japan ($X) and the UK ($X) were the largest lathe for removing metal suppliers to Sweden, with a combined X% share of total imports.

Among the main suppliers, the UK saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced a decline.

Import Prices by Country

In 2020, the average lathe for removing metal import price amounted to $X per unit, dropping by -X% against the previous year. Overall, the import price continues to indicate a noticeable setback. The growth pace was the most rapid in 2018 an increase of X% year-to-year. Over the period under review, average import prices reached the peak figure at $X per unit in 2007; however, from 2008 to 2020, import prices failed to regain the momentum.

Prices varied noticeably by the country of origin; the country with the highest price was Japan ($X per unit), while the price for Norway ($X per unit) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by the UK, while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox AI Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for lathes for removing metal in the world?
+
The countries with the highest volumes of lathe for removing metal consumption in 2020 were India (73K units), China (59K units) and the U.S. (29K units), with a combined 48% share of global consumption. Japan, Pakistan, Germany, France, the United Arab Emirates, Spain, the UK, Mexico, Italy and Russia lagged somewhat behind, together comprising a further 24%.
What are the largest producers of lathes for removing metal in the world?
+
The countries with the highest volumes of lathe for removing metal production in 2020 were India (89K units), China (67K units) and Japan (19K units), with a combined 60% share of global production. The U.S., South Korea, Taiwan (Chinese), France, Pakistan, Germany and the UK lagged somewhat behind, together accounting for a further 22%.
What are the leading suppliers of lathes for removing metal to Sweden?
+
In value terms, the largest lathe for removing metal suppliers to Sweden were Germany ($18M), Japan ($12M) and the UK ($4.3M), with a combined 76% share of total imports.
What are the leading importers of lathes for removing metal from Sweden?
+
In value terms, Germany ($1.5M) remains the key foreign market for lathe for removing metal exports from Sweden, comprising 38% of total exports. The second position in the ranking was occupied by Latvia ($674K), with a 17% share of total exports. It was followed by Norway, with a 11% share.
What is the average export price for lathes for removing metal in Sweden?
+
In 2020, the average lathe for removing metal export price amounted to $27,761 per unit, falling by -11.7% against the previous year.
What is the average import price for lathes for removing metal in Sweden?
+
The average lathe for removing metal import price stood at $70,989 per unit in 2020, with a decrease of -21.9% against the previous year.

Product coverage:
• Prodcom 28412123 - Numerically controlled horizontal lathes, turning centres, for removing metal
• Prodcom 28412127 - Numerically controlled horizontal lathes, automatic lathes, for removing metal (excluding turning centres)
• Prodcom 28412129 - Numerically controlled horizontal lathes, for removing metal (excluding turning centres, automatic lathes)
• Prodcom 28412140 - Non-numerically controlled horizontal lathes, for removing metal
• Prodcom 28412160 - Lathes, including turning centres, for removing metal (excluding horizontal lathes)

This report provides an in-depth analysis of the market for lathe for removing metal in Sweden. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2025.


Country coverage:
• Sweden

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in Sweden
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2020
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2020
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2020
Table 2:
Market Volume, In Physical Terms, 2007–2020
Table 3:
Market Value, 2007–2020
Table 4:
Per Capita Consumption In 2007–2020
Table 5:
Imports, In Physical Terms, By Country, 2007–2020
Table 6:
Imports, In Value Terms, By Country, 2007–2020
Table 7:
Import Prices, By Country Of Origin, 2007–2020
Table 8:
Exports, In Physical Terms, By Country, 2007–2020
Table 9:
Exports, In Value Terms, By Country, 2007–2020
Table 10:
Export Prices, By Country Of Destination, 2007–2020
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2020
Figure 2:
Market Value, 2007–2020
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2020
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2020
Figure 5:
Trade Balance, In Physical Terms, 2007–2020
Figure 6:
Trade Balance, In Value Terms, 2007–2020
Figure 7:
Per Capita Consumption, 2007–2020
Figure 8:
Market Forecast To 2025
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2020
Figure 21:
Production, In Value Terms, 2007–2020
Figure 22:
Imports, In Physical Terms, 2007–2020
Figure 23:
Imports, In Value Terms, 2007–2020
Figure 24:
Imports, In Physical Terms, By Country, 2020
Figure 25:
Imports, In Physical Terms, By Country, 2007–2020
Figure 26:
Imports, In Value Terms, By Country, 2007–2020
Figure 27:
Import Prices, By Country Of Origin, 2007–2020
Figure 28:
Exports, In Physical Terms, 2007–2020
Figure 29:
Exports, In Value Terms, 2007–2020
Figure 30:
Exports, In Physical Terms, By Country, 2020
Figure 31:
Exports, In Physical Terms, By Country, 2007–2020
Figure 32:
Exports, In Value Terms, By Country, 2007–2020
Figure 33:
Export Prices, By Country Of Destination, 2007–2020

Webinar: Global Ethanol Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global ethanol market.



Thursday, June 24th, 2021 @ 04:00 pm ET


Register

Webinar: Global Coal Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global сoal market.



Thursday, July 15th, 2021 @ 04:00 pm ET


Register

Webinar: Global Beef Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global beef market.



Thursday, September 16th, 2021 @ 04:00 pm ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data