SADC - Mining Machinery - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSADC: Market for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids 2024
Market Size for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in SADC
The SADC market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids soared to $X in 2022, jumping by X% against the previous year. The total consumption indicated a modest increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by X% against 2016 indices. The level of consumption peaked in 2022 and is expected to retain growth in the immediate term.
Production of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in SADC
In value terms, production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids amounted to $X in 2022 estimated in export price. Over the period under review, production, however, posted buoyant growth. The most prominent rate of growth was recorded in 2016 when the production volume increased by X%. Over the period under review, production of hit record highs at $X in 2020; however, from 2021 to 2022, production remained at a lower figure.
Exports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids
Exports in SADC
In 2022, shipments abroad of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids decreased by X% to X units for the first time since 2019, thus ending a two-year rising trend. Over the period under review, exports, however, saw a remarkable increase. The pace of growth was the most pronounced in 2017 when exports increased by X%. As a result, the exports reached the peak of X units. From 2018 to 2022, the growth of the exports of failed to regain momentum.
In value terms, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids expanded markedly to $X in 2022. In general, exports recorded a noticeable shrinkage. The growth pace was the most rapid in 2021 when exports increased by X% against the previous year. Over the period under review, the exports of reached the peak figure at $X in 2013; however, from 2014 to 2022, the exports failed to regain momentum.
Exports by Country
South Africa prevails in solids structure, reaching X units, which was approx. X% of total exports in 2022. It was distantly followed by Zambia (X units), mixing up a X% share of total exports.
Exports from South Africa increased at an average annual rate of X% from 2012 to 2022. At the same time, Zambia (X%) displayed positive paces of growth. Moreover, Zambia emerged as the fastest-growing exporter exported in SADC, with a CAGR of X% from 2012-2022. From 2012 to 2022, the share of Zambia increased by X percentage points, while the shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, South Africa ($X) remains the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids supplier in SADC, comprising X% of total exports. The second position in the ranking was taken by Zambia ($X), with a X% share of total exports.
In South Africa, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids declined by an average annual rate of X% over the period from 2012-2022.
Export Prices by Country
The export price in SADC stood at $X per unit in 2022, increasing by X% against the previous year. Overall, the export price, however, faced a deep slump. The pace of growth appeared the most rapid in 2018 when the export price increased by X%. Over the period under review, the export prices hit record highs at $X per unit in 2012; however, from 2013 to 2022, the export prices stood at a somewhat lower figure.
Average prices varied noticeably amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Zambia ($X per unit), while South Africa stood at $X per unit.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by South Africa (X%).
Imports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids
Imports in SADC
In 2022, supplies from abroad of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids increased by X% to X units, rising for the second year in a row after two years of decline. Overall, imports continue to indicate a mild expansion. The pace of growth was the most pronounced in 2018 with an increase of X%. Over the period under review, imports of attained the maximum in 2022 and are expected to retain growth in the immediate term.
In value terms, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids soared to $X in 2022. Over the period under review, imports continue to indicate a relatively flat trend pattern. As a result, imports reached the peak and are likely to continue growth in the immediate term.
Imports by Country
South Africa represented the major importing country with an import of around X units, which accounted for X% of total imports. Democratic Republic of the Congo (X units) ranks second in terms of the total imports with a X% share, followed by Tanzania (X%), Zimbabwe (X%), Angola (X%) and Botswana (X%). Zambia (X units) took a relatively small share of total imports.
South Africa experienced a relatively flat trend pattern with regard to volume of imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids. At the same time, Zimbabwe (X%), Botswana (X%) and Tanzania (X%) displayed positive paces of growth. Moreover, Zimbabwe emerged as the fastest-growing importer imported in SADC, with a CAGR of X% from 2012-2022. By contrast, Democratic Republic of the Congo (X%), Angola (X%) and Zambia (X%) illustrated a downward trend over the same period. While the share of Democratic Republic of the Congo (X p.p.), Zimbabwe (X p.p.), Botswana (X p.p.) and Tanzania (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of South Africa (X p.p.), Zambia (X p.p.) and Angola (X p.p.) displayed negative dynamics.
In value terms, the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids importing markets in SADC were Democratic Republic of the Congo ($X), Zimbabwe ($X) and South Africa ($X), together accounting for X% of total imports.
Among the main importing countries, Democratic Republic of the Congo, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the import price in SADC amounted to $X per unit, with an increase of X% against the previous year. Over the period under review, the import price, however, recorded a relatively flat trend pattern. Over the period under review, import prices attained the peak figure at $X per unit in 2012; afterwards, it flattened through to 2022.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Zimbabwe ($X per unit), while South Africa ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Democratic Republic of the Congo (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in SADC. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28924030 - Sorting, screening, separating, washing machines, crushing, g rinding, mixing, kneading machines excluding concrete/mortar mixers, machines for mixing mineral substances with bitumen
- Prodcom 28924050 - Concrete or mortar mixers
- Prodcom 28924070 - Machines for mixing mineral substances with bitumen
- Prodcom 28993953 - Other machinery for earth, stone, ores, etc., n.e.c.
Country coverage:
- Angola
- Botswana
- Comoros
- Democratic Republic of the Congo
- Lesotho
- Madagascar
- Malawi
- Mauritius
- Mozambique
- Namibia
- Seychelles
- South Africa
- Swaziland
- Tanzania
- Zambia
- Zimbabwe
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in SADC, split by region and country
- Trade (exports and imports) in SADC
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Angola
- Botswana
- Comoros
- Democratic Republic of the Congo
- Lesotho
- Madagascar
- Malawi
- Mauritius
- Mozambique
- Namibia
- Seychelles
- South Africa
- Swaziland
- Tanzania
- Zambia
- Zimbabwe
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in Asia.
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the U.S..
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in China.
This report provides an in-depth analysis of the market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the EU.
This report provides an in-depth analysis of the global market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids.