EU: Overview of the Market for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids 2021

Market Size for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in the EU

In 2019, the EU market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids increased by X% to $X, rising for the third year in a row after five years of decline. Overall, consumption continues to indicate a mild descent. The pace of growth appeared the most rapid in 2011 with an increase of X% y-o-y. The level of consumption peaked at $X in 2008; however, from 2009 to 2019, consumption failed to regain the momentum.

Production of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in the EU

In value terms, production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids contracted to $X in 2019 estimated in export prices. Over the period under review, production, however, recorded a perceptible contraction. The pace of growth appeared the most rapid in 2011 with an increase of X% against the previous year. The level of production peaked at $X in 2008; however, from 2009 to 2019, production remained at a lower figure.

Production By Country in the EU

The countries with the highest volumes of production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in 2019 were Germany (X units), Spain (X units) and Italy (X units), with a combined X% share of total production.

From 2007 to 2019, the most notable rate of growth in terms of production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids, amongst the key producing countries, was attained by Spain, while production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids for the other leaders experienced a decline in the production figures.

Exports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Exports in the EU

In 2019, overseas shipments of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids increased by X% to X units, rising for the third year in a row after two years of decline. Over the period under review, exports, however, showed a pronounced slump. The most prominent rate of growth was recorded in 2011 with an increase of X% against the previous year. Over the period under review, exports hit record highs at X units in 2008; however, from 2009 to 2019, exports failed to regain the momentum.

In value terms, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids dropped to $X in 2019. Overall, exports, however, saw a noticeable contraction. The most prominent rate of growth was recorded in 2008 when exports increased by X% y-o-y. As a result, exports reached the peak of $X. From 2009 to 2019, the growth of exports remained at a somewhat lower figure.

Exports by Country

In 2019, Germany (X units) and Italy (X units) were the key exporters of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the European Union, together finishing at near X% of total exports. It was distantly followed by the UK (X units), constituting a X% share of total exports. The following exporters - France (X units), Spain (X units), Belgium (X units), Austria (X units), Denmark (X units), Finland (X units), the Czech Republic (X units) and Poland (X units) - together made up X% of total exports.

From 2007 to 2019, the biggest increases were in Denmark, while shipments for the other leaders experienced more modest paces of growth.

In value terms, the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids supplying countries in the European Union were Germany ($X), the UK ($X) and Italy ($X), with a combined X% share of total exports. Finland, Austria, France, Spain, Belgium, the Czech Republic, Denmark and Poland lagged somewhat behind, together accounting for a further X the main exporting countries, Poland recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced mixed trends in the exports figures.

Export Prices by Country

The export price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the European Union stood at $X per unit in 2019, with a decrease of -X% against the previous year. Over the last twelve years, it increased at an average annual rate of +X%. The most prominent rate of growth was recorded in 2008 an increase of X% year-to-year. The level of export peaked at $X per unit in 2018, and then contracted in the following year.

There were significant differences in the average prices amongst the major exporting countries. In 2019, the country with the highest price was Finland ($X per unit), while Italy ($X per unit) was amongst the lowest.

From 2007 to 2019, the most notable rate of growth in terms of prices was attained by Italy, while the other leaders experienced more modest paces of growth.

Imports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Imports in the EU

For the fourth consecutive year, the European Union recorded growth in overseas purchases of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids, which increased by X% to X units in 2019. In general, imports saw a prominent increase. The pace of growth was the most pronounced in 2018 with an increase of X% against the previous year. Over the period under review, imports reached the peak figure in 2019 and are expected to retain growth in the immediate term.

In value terms, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids stood at $X in 2019. Over the period under review, imports saw a noticeable contraction. The pace of growth appeared the most rapid in 2018 with an increase of X% against the previous year. Over the period under review, imports attained the peak figure at $X in 2008; however, from 2009 to 2019, imports remained at a lower figure.

Imports by Country

In 2019, Germany (X units), distantly followed by Romania (X units), the UK (X units), Finland (X units), Sweden (X units), France (X units), the Netherlands (X units) and Spain (X units) represented the main importers of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids, together constituting X% of total imports. The Czech Republic (X units), Belgium (X units), Lithuania (X units), Greece (X units) and Poland (X units) followed a long way behind the leaders.

From 2007 to 2019, the biggest increases were in Lithuania, while purchases for the other leaders experienced more modest paces of growth.

In value terms, Germany ($X), France ($X) and the UK ($X) appeared to be the countries with the highest levels of imports in 2019, with a combined X% share of total imports. These countries were followed by Poland, Spain, the Netherlands, Belgium, Sweden, Romania, Finland, the Czech Republic, Lithuania and Greece, which together accounted for a further X Netherlands saw the highest rates of growth with regard to the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2019, the import price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the European Union amounted to $X per unit, falling by -X% against the previous year. Overall, the import price recorded a abrupt contraction. The pace of growth was the most pronounced in 2011 when the import price increased by X% year-to-year. Over the period under review, import prices hit record highs at $X per unit in 2008; however, from 2009 to 2019, import prices failed to regain the momentum.

Prices varied noticeably by the country of destination; the country with the highest price was Poland ($X per unit), while Romania ($X per unit) was amongst the lowest.

From 2007 to 2019, the most notable rate of growth in terms of prices was attained by the Netherlands, while the other leaders experienced a decline in the import price figures.

Source: IndexBox AI Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the the EU?

+

The countries with the highest volumes of consumption of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in 2019 were Germany (278K units), Spain (204K units) and the UK (135K units), together accounting for 45% of total consumption. France, Italy, Romania, Portugal, Finland, Sweden, the Netherlands, Poland, Croatia and Belgium lagged somewhat behind, together comprising a further 43%.

What are the largest producers of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the the EU?

+

The countries with the highest volumes of production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in 2019 were Germany (236K units), Spain (174K units) and Italy (159K units), with a combined 61% share of total production.

What are the leading exporters of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the the EU?

+

In value terms, the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids supplying countries in the European Union were Germany ($1.5B), the UK ($1B) and Italy ($990M), with a combined 69% share of total exports. These countries were followed by Finland, Austria, France, Spain, Belgium, the Czech Republic, Denmark and Poland, which together accounted for a further 24%.

What are the leading importers of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the the EU?

+

In value terms, Germany ($305M), France ($224M) and the UK ($153M) constituted the countries with the highest levels of imports in 2019, together comprising 36% of total imports. Poland, Spain, the Netherlands, Belgium, Sweden, Romania, Finland, the Czech Republic, Lithuania and Greece lagged somewhat behind, together accounting for a further 40%.

What is the average export price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the the EU?

+

The export price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the European Union stood at $16,276 per unit in 2019, with a decrease of -8.7% against the previous year.

What is the average import price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the the EU?

+

The import price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in the European Union stood at $2,597 per unit in 2019, falling by -15.8% against the previous year.