Report World - Unit Construction Machines for Working Metal - Market Analysis, Forecast, Size, Trends and Insights for 499$
Latest Report Update: Sep 30, 2022

World - Unit Construction Machines for Working Metal - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Single report
Sent by email within 24h (Mon-Fri)

Global Unit Construction Machine Market 2022

Unit Construction Machine Market Size

The global unit construction machine market soared to $X in 2021, growing by X% against the previous year. Overall, the total consumption indicated prominent growth from 2012 to 2021: its value increased at an average annual rate of +X% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, consumption increased by +X% against 2019 indices. As a result, consumption reached the peak level and is likely to continue growth in the immediate term.

Unit Construction Machine Production

In value terms, unit construction machine production amounted to $X in 2021 estimated in export price. The total output value increased at an average annual rate of +X% over the period from 2012 to 2021; however, the trend pattern remained relatively stable, with somewhat noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2014 with an increase of X% against the previous year. Global production peaked at $X in 2017; however, from 2018 to 2021, production remained at a lower figure.

Unit Construction Machine Exports

Exports

In 2021, global unit construction machine exports surged to X units, rising by X% on the previous year's figure. Over the period under review, exports posted a perceptible expansion. As a result, the exports reached the peak and are likely to continue growth in the immediate term.

In value terms, unit construction machine exports soared to $X in 2021. In general, exports, however, continue to indicate a perceptible contraction. Over the period under review, the global exports hit record highs at $X in 2012; however, from 2013 to 2021, the exports stood at a somewhat lower figure.

Exports by Country

Spain was the major exporter of unit construction machines for working metal in the world, with the volume of exports reaching X units, which was near X% of total exports in 2021. It was distantly followed by Italy (X units), the Netherlands (X units), Singapore (X units) and Austria (X units), together committing a X% share of total exports. China (X units), Germany (X units), France (X units) and Belgium (X units) held a minor share of total exports.

Exports from Spain increased at an average annual rate of +X% from 2012 to 2021. At the same time, the Netherlands (+X%), Belgium (+X%), Austria (+X%), Singapore (+X%) and Italy (+X%) displayed positive paces of growth. Moreover, the Netherlands emerged as the fastest-growing exporter exported in the world, with a CAGR of +X% from 2012-2021. By contrast, France (-X%), Germany (-X%) and China (-X%) illustrated a downward trend over the same period. From 2012 to 2021, the share of Spain, the Netherlands, Austria, Singapore, Italy and Belgium increased by +X, +X, +X, +X, +X and +X percentage points, respectively. France (-X p.p.), Germany (-X p.p.) and China (-X p.p.) saw their shares reduced.

In value terms, Spain ($X) remains the largest unit construction machine supplier worldwide, comprising X% of global exports. The second position in the ranking was taken by Italy ($X), with a X% share of global exports. It was followed by Austria, with a X% share.

From 2012 to 2021, the average annual growth rate of value in Spain totaled +X%. The remaining exporting countries recorded the following average annual rates of exports growth: Italy (+X% per year) and Austria (+X% per year).

Export Prices by Country

In 2021, the average unit construction machine export price amounted to $X per unit, falling by -X% against the previous year. Overall, the export price showed a abrupt curtailment. The pace of growth appeared the most rapid in 2017 an increase of X%. As a result, the export price reached the peak level of $X per unit. From 2018 to 2021, the the average export prices remained at a somewhat lower figure.

There were significant differences in the average prices amongst the major exporting countries. In 2021, the country with the highest price was Italy ($X per unit), while the Netherlands ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by France (-X%), while the other global leaders experienced a decline in the export price figures.

Unit Construction Machine Imports

Imports

In 2021, after four years of decline, there was significant growth in overseas purchases of unit construction machines for working metal, when their volume increased by X% to X units. Over the period under review, imports, however, showed a noticeable downturn. Global imports peaked at X units in 2012; however, from 2013 to 2021, imports remained at a lower figure.

In value terms, unit construction machine imports expanded rapidly to $X in 2021. In general, imports, however, showed a pronounced slump. The most prominent rate of growth was recorded in 2018 when imports increased by X%. Over the period under review, global imports attained the peak figure at $X in 2013; however, from 2014 to 2021, imports stood at a somewhat lower figure.

Imports by Country

The Netherlands prevails in imports structure, finishing at X units, which was near X% of total imports in 2021. Vietnam (X units), Burundi (X units), Nigeria (X units), India (X units) and Barbados (X units) took a minor share of total imports.

Imports into the Netherlands increased at an average annual rate of +X% from 2012 to 2021. At the same time, Barbados (+X%), Vietnam (+X%), Burundi (+X%) and Nigeria (+X%) displayed positive paces of growth. Moreover, Barbados emerged as the fastest-growing importer imported in the world, with a CAGR of +X% from 2012-2021. By contrast, India (-X%) illustrated a downward trend over the same period. From 2012 to 2021, the share of the Netherlands, Vietnam, Burundi, Barbados and Nigeria increased by +X, +X, +X, +X and +X percentage points, while the shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest unit construction machine importing markets worldwide were India ($X), Vietnam ($X) and the Netherlands ($X), with a combined X% share of global imports. These countries were followed by Nigeria, Burundi and Barbados, which together accounted for a further X terms of the main importing countries, Barbados, with a CAGR of +X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other global leaders experienced more modest paces of growth.

Import Prices by Country

The average unit construction machine import price stood at $X per unit in 2021, with a decrease of -X% against the previous year. In general, the import price continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2013 when the average import price increased by X% against the previous year. Global import price peaked at $X per unit in 2020, and then fell rapidly in the following year.

There were significant differences in the average prices amongst the major importing countries. In 2021, the country with the highest price was India ($X per unit), while the Netherlands ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Burundi (-X%), while the other global leaders experienced a decline in the import price figures.

Source: IndexBox Market Intelligence Platform

Base Year Historical Period Forecast Period Units
2021 2007-2021 2022-2030 US$, Tons

Frequently Asked Questions (FAQ) :

What are the largest markets for unit construction machines for working metal in the world?
+
The country with the largest volume of unit construction machine consumption was Italy, accounting for 27% of total volume. Moreover, unit construction machine consumption in Italy exceeded the figures recorded by the second-largest consumer, the Netherlands, threefold. The third position in this ranking was held by China, with an 8.5% share.
What are the largest producers of unit construction machines for working metal in the world?
+
The countries with the highest volumes of production in 2021 were Italy, Spain and Singapore, with a combined 51% share of global production.
What are the leading exporters of unit construction machines for working metal in the world?
+
In value terms, Spain remains the largest unit construction machine supplier worldwide, comprising 46% of global exports. The second position in the ranking was held by Italy, with a 14% share of global exports. It was followed by Austria, with a 6.2% share.
What are the leading importers of unit construction machines for working metal in the world?
+
In value terms, India, Vietnam and the Netherlands appeared to be the countries with the highest levels of imports in 2021, with a combined 9.8% share of global imports. These countries were followed by Nigeria, Burundi and Barbados, which together accounted for a further 0.9%.
What is the average export price for unit construction machines for working metal in the world?
+
The average unit construction machine export price stood at $3,703 per unit in 2021, which is down by -30.3% against the previous year.
What is the average import price for unit construction machines for working metal in the world?
+
The average unit construction machine import price stood at $7,475 per unit in 2021, shrinking by -44.7% against the previous year.

This report provides an in-depth analysis of the global unit construction machine market. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Product coverage:
• Prodcom 28411250 - Unit construction machines (single station) for working metal

Data coverage:
• Global market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Global production, split by region and country
• Global trade (exports and imports)
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
REPORT DESCRIPTION
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
CONSUMPTION BY COUNTRY
3.3
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCT

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. GLOBAL PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
7.2
PRODUCTION BY COUNTRY
8. GLOBAL IMPORTS

The Largest Importers on The Market and How They Succeed

8.1
IMPORTS FROM 2012–2021
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. GLOBAL EXPORTS

The Largest Exporters on The Market and How They Succeed

9.1
EXPORTS FROM 2012–2021
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

11. COUNTRY PROFILES

The Largest Markets And Their Profiles

United States
China
Japan
Germany
United Kingdom
France
Brazil
Italy
Russian Federation
India
Canada
Australia
Republic of Korea
Spain
Mexico
Indonesia
Netherlands
Turkey
Saudi Arabia
Switzerland
Sweden
Nigeria
Poland
Belgium
Argentina
Norway
Austria
Thailand
United Arab Emirates
Colombia
Denmark
South Africa
Malaysia
Israel
Singapore
Egypt
Philippines
Finland
Chile
Ireland
Pakistan
Greece
Portugal
Kazakhstan
Algeria
Czech Republic
Qatar
Peru
Romania
Vietnam
LIST OF TABLES
Table 1:
Key Findings In 2021
Table 2:
Market Volume, In Physical Terms, 2012–2021
Table 3:
Market Value, 2012–2021
Table 4:
Per Capita Consumption, By Country, 2018–2021
Table 5:
Production, In Physical Terms, By Country, 2012–2021
Table 6:
Imports, In Physical Terms, By Country, 2012–2021
Table 7:
Imports, In Value Terms, By Country, 2012–2021
Table 8:
Import Prices, By Country Of Destination, 2012–2021
Table 9:
Exports, In Physical Terms, By Country, 2012–2021
Table 10:
Exports, In Value Terms, By Country, 2012–2021
Table 11:
Export Prices, By Country Of Origin, 2012–2021
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2012–2021
Figure 2:
Market Value, 2012–2021
Figure 3:
Consumption, By Country, 2021
Figure 4:
Market Forecast To 2030
Figure 5:
Products: Market Size And Growth, By Type
Figure 6:
Products: Average Per Capita Consumption, By Type
Figure 7:
Products: Exports And Growth, By Type
Figure 8:
Products: Export Prices And Growth, By Type
Figure 9:
Production Volume And Growth
Figure 10:
Exports And Growth
Figure 11:
Export Prices And Growth
Figure 12:
Market Size And Growth
Figure 13:
Per Capita Consumption
Figure 14:
Imports And Growth
Figure 15:
Import Prices
Figure 16:
Production, In Physical Terms, 2012–2021
Figure 17:
Production, In Value Terms, 2012–2021
Figure 18:
Production, By Country, 2021
Figure 19:
Production, In Physical Terms, By Country, 2012–2021
Figure 20:
Imports, In Physical Terms, 2012–2021
Figure 21:
Imports, In Value Terms, 2012–2021
Figure 22:
Imports, In Physical Terms, By Country, 2021
Figure 23:
Imports, In Physical Terms, By Country, 2012–2021
Figure 24:
Imports, In Value Terms, By Country, 2012–2021
Figure 25:
Import Prices, By Country, 2012–2021
Figure 26:
Exports, In Physical Terms, 2012–2021
Figure 27:
Exports, In Value Terms, 2012–2021
Figure 28:
Exports, In Physical Terms, By Country, 2021
Figure 29:
Exports, In Physical Terms, By Country, 2012–2021
Figure 30:
Exports, In Value Terms, By Country, 2012–2021
Figure 31:
Export Prices, 2012–2021
Webinar: Decarbonisation and Your Business Strategy - Steps and Practices

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, January 25th, 2022 @ 04:00 pm ET

Webinar: Global Metal Tank Market - Statistics, Trends, and Outlook

Join our live webinar to get insights into the global metal tank market.



Thursday, April 15th, 2021 @ 04:00 pm ET