Switzerland: Overview of the Market for Machine-Tools For Working Any Material By Removal Of Material 2021

Market Size for Machine-Tools For Working Any Material By Removal Of Material in Switzerland

The Swiss machine-tool for removing material market contracted markedly to $X in 2020, waning by -X% against the previous year. Over the period under review, consumption recorded a abrupt shrinkage. The pace of growth was the most pronounced in 2013 when the market value increased by X% year-to-year. As a result, consumption reached the peak level of $X. From 2014 to 2020, the growth of the market remained at a somewhat lower figure.

Production of Machine-Tools For Working Any Material By Removal Of Material in Switzerland

In value terms, machine-tool for removing material production declined rapidly to $X in 2020 estimated in export prices. Over the period under review, production saw a abrupt downturn. The most prominent rate of growth was recorded in 2010 when the production volume increased by X% against the previous year. Machine-tool for removing material production peaked at $X in 2007; however, from 2008 to 2020, production stood at a somewhat lower figure.

Exports of Machine-Tools For Working Any Material By Removal Of Material

Exports from Switzerland

In 2020, shipments abroad of machine-tools for working any material by removal of material decreased by -X% to X units, falling for the second year in a row after two years of growth. Over the period under review, exports showed a abrupt decline. The growth pace was the most rapid in 2010 with an increase of X% year-to-year. Over the period under review, exports reached the peak figure at X units in 2018; however, from 2019 to 2020, exports remained at a lower figure.

In value terms, machine-tool for removing material exports fell markedly to $X in 2020. Overall, exports saw a perceptible decline. The most prominent rate of growth was recorded in 2010 when exports increased by X% y-o-y. Exports peaked at $X in 2018; however, from 2019 to 2020, exports stood at a somewhat lower figure.

Exports by Country

Germany (X units), the U.S. (X units) and China (X units) were the main destinations of machine-tool for removing material exports from Switzerland, together comprising X% of total exports. These countries were followed by Italy, Austria, Turkey, the UK, France, Poland, Spain, the Netherlands, Belgium and Viet Nam, which together accounted for a further X 2007 to 2020, the biggest increases were in Viet Nam, while shipments for the other leaders experienced more modest paces of growth.

In value terms, the largest markets for machine-tool for removing material exported from Switzerland were Germany ($X), the U.S. ($X) and China ($X), together accounting for X% of total exports. Italy, the UK, France, Austria, Poland, Turkey, Spain, the Netherlands, Belgium and Viet Nam lagged somewhat behind, together comprising a further X the main countries of destination, Viet Nam recorded the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average machine-tool for removing material export price stood at $X per unit in 2020, dropping by -X% against the previous year. Overall, the export price, however, continues to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2019 an increase of X% y-o-y. Over the period under review, average export prices hit record highs at $X per unit in 2014; however, from 2015 to 2020, export prices failed to regain the momentum.

Prices varied noticeably by the country of destination; the country with the highest price was the UK ($X per unit), while the average price for exports to Viet Nam ($X per unit) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to the U.S., while the prices for the other major destinations experienced more modest paces of growth.

Imports of Machine-Tools For Working Any Material By Removal Of Material

Imports into Switzerland

In 2020, purchases abroad of machine-tools for working any material by removal of material decreased by -X% to X units for the first time since 2016, thus ending a three-year rising trend. In general, imports, however, continue to indicate a mild increase. The pace of growth was the most pronounced in 2011 when imports increased by X% year-to-year. Imports peaked at X units in 2019, and then shrank markedly in the following year.

In value terms, machine-tool for removing material imports declined to $X in 2020. Overall, total imports indicated a tangible expansion from 2007 to 2020: its value increased at an average annual rate of +X% over the last thirteen-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, imports decreased by -X% against 2018 indices. The most prominent rate of growth was recorded in 2011 with an increase of X% year-to-year. Over the period under review, imports hit record highs at $X in 2018; however, from 2019 to 2020, imports failed to regain the momentum.

Imports by Country

The Netherlands (X units), Germany (X units) and the U.S. (X units) were the main suppliers of machine-tool for removing material imports to Switzerland, together accounting for X% of total imports. China, Italy, Spain and France lagged somewhat behind, together accounting for a further X 2007 to 2020, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Spain, while imports for the other leaders experienced more modest paces of growth.

In value terms, Germany ($X) constituted the largest supplier of machine-tool for removing material to Switzerland, comprising X% of total imports. The second position in the ranking was occupied by Italy ($X), with a X% share of total imports. It was followed by France, with a X% share.

From 2007 to 2020, the average annual growth rate of value from Germany was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Italy (+X% per year) and France (-X% per year).

Import Prices by Country

In 2020, the average machine-tool for removing material import price amounted to $X per unit, growing by X% against the previous year. Over the period under review, the import price recorded a slight increase. The pace of growth was the most pronounced in 2012 an increase of X% year-to-year. Over the period under review, average import prices hit record highs at $X per unit in 2016; however, from 2017 to 2020, import prices failed to regain the momentum.

Prices varied noticeably by the country of origin; the country with the highest price was France ($X per unit), while the price for the Netherlands ($X per unit) was amongst the lowest.

From 2007 to 2020, the most notable rate of growth in terms of prices was attained by Germany, while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for machine-tools for working any material by removal of material in the world?

+

The countries with the highest volumes of machine-tool for removing material consumption in 2020 were China (198K units), Japan (156K units) and the UK (78K units), with a combined 38% share of global consumption. These countries were followed by the Netherlands, the U.S., Spain, Australia, India, Mexico, Italy, Germany, Ethiopia and France, which together accounted for a further 34%.

What are the largest producers of machine-tools for working any material by removal of material in the world?

+

The countries with the highest volumes of machine-tool for removing material production in 2020 were China (246K units), Japan (160K units) and Italy (22K units), with a combined 65% share of global production. These countries were followed by France, Mexico, Germany, Ethiopia, Switzerland, Spain, Taiwan (Chinese), South Korea, Turkey and India, which together accounted for a further 26%.

What are the leading suppliers of machine-tools for working any material by removal of material to Switzerland?

+

In value terms, Germany ($27M) constituted the largest supplier of machine-tool for removing material to Switzerland, comprising 36% of total imports. The second position in the ranking was occupied by Italy ($12M), with a 16% share of total imports. It was followed by France, with a 8.5% share.

What are the leading importers of machine-tools for working any material by removal of material from Switzerland?

+

In value terms, the largest markets for machine-tool for removing material exported from Switzerland were Germany ($100M), the U.S. ($87M) and China ($42M), with a combined 39% share of total exports. Italy, the UK, France, Austria, Poland, Turkey, Spain, the Netherlands, Belgium and Viet Nam lagged somewhat behind, together accounting for a further 33%.

What is the average export price for machine-tools for working any material by removal of material in Switzerland?

+

The average machine-tool for removing material export price stood at $29,957 per unit in 2020, falling by -3.8% against the previous year.

What is the average import price for machine-tools for working any material by removal of material in Switzerland?

+

The average machine-tool for removing material import price stood at $19,817 per unit in 2020, with an increase of 23% against the previous year.