MERCOSUR - Horizontal Machining Centres for Working Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingMERCOSUR: Horizontal Machining Centre Market 2024
Horizontal Machining Centre Market Size in MERCOSUR
The MERCOSUR horizontal machining centre market dropped to $X in 2022, with a decrease of X% against the previous year. The total consumption indicated a buoyant expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2019 indices. The level of consumption peaked at $X.2B in 2019; however, from 2020 to 2022, consumption failed to regain momentum.
Horizontal Machining Centre Production in MERCOSUR
In value terms, horizontal machining centre production reduced modestly to $X.3B in 2022 estimated in export price. The total production indicated a strong expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2019 indices. The growth pace was the most rapid in 2016 with an increase of X%. The level of production peaked at $X.3B in 2019; however, from 2020 to 2022, production failed to regain momentum.
Horizontal Machining Centre Exports
Exports in MERCOSUR
In 2022, exports of horizontal machining centres for working metal in MERCOSUR soared to X units, jumping by X% compared with the previous year's figure. In general, exports, however, continue to indicate a abrupt decrease. The most prominent rate of growth was recorded in 2020 when exports increased by X% against the previous year. The volume of export peaked at X units in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
In value terms, horizontal machining centre exports surged to $X in 2022. Over the period under review, exports, however, continue to indicate a noticeable setback. The most prominent rate of growth was recorded in 2016 when exports increased by X% against the previous year. The level of export peaked at $X in 2013; however, from 2014 to 2022, the exports failed to regain momentum.
Exports by Country
Brazil prevails in exports structure, reaching X units, which was near X% of total exports in 2022. Colombia (X units) followed a long way behind the leaders.
Exports from Brazil decreased at an average annual rate of X% from 2012 to 2022. Colombia (X%) illustrated a downward trend over the same period. From 2012 to 2022, the share of Brazil decreased by X percentage points, while the shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Brazil ($X) remains the largest horizontal machining centre supplier in MERCOSUR, comprising X% of total exports. The second position in the ranking was taken by Colombia ($X), with a X% share of total exports.
In Brazil, horizontal machining centre exports plunged by an average annual rate of X% over the period from 2012-2022.
Export Prices by Country
In 2022, the export price in MERCOSUR amounted to $X per unit, increasing by X% against the previous year. Over the period under review, the export price posted a resilient expansion. The most prominent rate of growth was recorded in 2021 an increase of X% against the previous year. Over the period under review, the export prices attained the peak figure at $X per unit in 2016; however, from 2017 to 2022, the export prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Brazil ($X per unit), while Colombia amounted to $X per unit.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Brazil (X%).
Horizontal Machining Centre Imports
Imports in MERCOSUR
In 2022, supplies from abroad of horizontal machining centres for working metal increased by X% to X units, rising for the second year in a row after two years of decline. In general, imports, however, showed a noticeable slump. The pace of growth appeared the most rapid in 2021 with an increase of X%. The volume of import peaked at X units in 2012; however, from 2013 to 2022, imports remained at a lower figure.
In value terms, horizontal machining centre imports skyrocketed to $X in 2022. Overall, imports, however, continue to indicate a noticeable curtailment. The most prominent rate of growth was recorded in 2021 with an increase of X%. The level of import peaked at $X in 2012; however, from 2013 to 2022, imports remained at a lower figure.
Imports by Country
Brazil was the key importer of horizontal machining centres for working metal in MERCOSUR, with the volume of imports resulting at X units, which was near X% of total imports in 2022. Argentina (X units) took the second position in the ranking, distantly followed by Colombia (X units) and Peru (X units). All these countries together held near X% share of total imports. Chile (X units) and Ecuador (X units) followed a long way behind the leaders.
Imports into Brazil decreased at an average annual rate of X% from 2012 to 2022. At the same time, Peru (X%), Ecuador (X%), Argentina (X%) and Colombia (X%) displayed positive paces of growth. Moreover, Peru emerged as the fastest-growing importer imported in MERCOSUR, with a CAGR of X% from 2012-2022. By contrast, Chile (X%) illustrated a downward trend over the same period. From 2012 to 2022, the share of Argentina, Peru and Colombia increased by X, X and X percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Brazil ($X) constitutes the largest market for imported horizontal machining centres for working metal in MERCOSUR, comprising X% of total imports. The second position in the ranking was held by Argentina ($X), with a X% share of total imports. It was followed by Colombia, with a X% share.
In Brazil, horizontal machining centre imports plunged by an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Argentina (X% per year) and Colombia (X% per year).
Import Prices by Country
The import price in MERCOSUR stood at $X per unit in 2022, which is down by X% against the previous year. In general, the import price, however, recorded a relatively flat trend pattern. The growth pace was the most rapid in 2013 an increase of X%. Over the period under review, import prices reached the peak figure at $X per unit in 2018; however, from 2019 to 2022, import prices stood at a somewhat lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Brazil ($X per unit), while Colombia ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Brazil (X%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the horizontal machining centre market in MERCOSUR. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28411220 - Horizontal machining centres for working metal
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in MERCOSUR, split by region and country
- Trade (exports and imports) in MERCOSUR
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Argentina
- Brazil
- Chile
- Colombia
- Ecuador
- Guyana
- Paraguay
- Peru
- Suriname
- Uruguay
- Venezuela
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the horizontal machining centre market in Asia.
This report provides an in-depth analysis of the horizontal machining centre market in the U.S..
This report provides an in-depth analysis of the horizontal machining centre market in China.
This report provides an in-depth analysis of the horizontal machining centre market in the EU.
This report provides an in-depth analysis of the global horizontal machining centre market.
- Horizontal Machining Centre Market
- Machine-Tool for Removing Material Market
- Unit Construction Machine Market
- Multi-Station Transfer Machine Market
- Lathe for Removing Metal Market
- Non-Numerically Controlled Lathe Market
- Way-Type Unit Head Market
- Numerically Controlled Drilling Machine Market
- Non-Numerically Controlled Drilling Machine Market
- Numerically Controlled Knee-Type Milling Machine Market