Report Japan - Machine-Tools for Working Any Material by Removal of Material - Market Analysis, Forecast, Size, Trends and Insights for 499$
Latest Report Update: May 22, 2022

Japan - Machine-Tools for Working Any Material by Removal of Material - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Pricing Plan

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service, Privacy Policy and Licenses. We'll occasionally send you account related emails.

Japan: Market for Machine-Tools For Working Any Material By Removal Of Material 2022

Market Size for Machine-Tools For Working Any Material By Removal Of Material in Japan

After two years of growth, the Japanese machine-tool for removing material market decreased by -X% to $X in 2021. In general, consumption continues to indicate a pronounced decline. Over the period under review, the market hit record highs at $X in 2012; however, from 2013 to 2021, consumption stood at a somewhat lower figure.

Production of Machine-Tools For Working Any Material By Removal Of Material in Japan

In value terms, machine-tool for removing material production amounted to $X in 2021 estimated in export prices. In general, production continues to indicate a noticeable setback. The pace of growth was the most pronounced in 2014 with an increase of X% against the previous year. Over the period under review, production reached the maximum level at $X in 2012; however, from 2013 to 2021, production failed to regain momentum.

Exports of Machine-Tools For Working Any Material By Removal Of Material

Exports from Japan

In 2021, after two years of decline, there was significant growth in overseas shipments of machine-tools for working any material by removal of material, when their volume increased by X% to X units. Over the period under review, exports, however, recorded a deep slump. The growth pace was the most rapid in 2018 when exports increased by X% against the previous year. As a result, the exports attained the peak of X units. From 2019 to 2021, the growth of the exports remained at a somewhat lower figure.

In value terms, machine-tool for removing material exports skyrocketed to $X in 2021. Overall, total exports indicated tangible growth from 2012 to 2021: its value decreased at an average annual rate of -X% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, the exports reached the peak and are likely to continue growth in the immediate term.

Exports by Country

China (X units), the United States (X units) and Taiwan (Chinese) (X units) were the main destinations of machine-tool for removing material exports from Japan, with a combined X% share of total exports. These countries were followed by South Korea, Belgium, Luxembourg, Hong Kong SAR, Germany, Italy and Thailand, which together accounted for a further X 2012 to 2021, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Luxembourg (+X%), while the other leaders experienced more modest paces of growth.

In value terms, China ($X), the United States ($X) and Taiwan (Chinese) ($X) constituted the largest markets for machine-tool for removing material exported from Japan worldwide, together accounting for X% of total exports. South Korea, Hong Kong SAR, Belgium, Germany, Thailand, Luxembourg and Italy lagged somewhat behind, together comprising a further X, with a CAGR of +X%, saw the highest rates of growth with regard to the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average machine-tool for removing material export price stood at $X per unit in 2021, growing by X% against the previous year. Overall, the export price saw a resilient expansion. The most prominent rate of growth was recorded in 2019 an increase of X% against the previous year. Over the period under review, the average export prices reached the peak figure in 2021 and is likely to see gradual growth in the near future.

There were significant differences in the average prices for the major external markets. In 2021, the country with the highest price was Hong Kong SAR ($X per unit), while the average price for exports to Luxembourg ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to Thailand (+X%), while the prices for the other major destinations experienced more modest paces of growth.

Imports of Machine-Tools For Working Any Material By Removal Of Material

Imports into Japan

In 2021, purchases abroad of machine-tools for working any material by removal of material increased by X% to X units, rising for the second consecutive year after four years of decline. Over the period under review, imports, however, recorded a abrupt decrease. The pace of growth was the most pronounced in 2014 with an increase of X% y-o-y. Imports peaked at X units in 2015; however, from 2016 to 2021, imports failed to regain momentum.

In value terms, machine-tool for removing material imports rose slightly to $X in 2021. In general, imports, however, continue to indicate a perceptible contraction. The pace of growth was the most pronounced in 2014 when imports increased by X% year-to-year. Imports peaked at $X in 2015; however, from 2016 to 2021, imports stood at a somewhat lower figure.

Imports by Country

In 2021, China (X units) constituted the largest machine-tool for removing material supplier to Japan, with a X% share of total imports. Moreover, machine-tool for removing material imports from China exceeded the figures recorded by the second-largest supplier, Germany (X units), sevenfold. The third position in this ranking was occupied by the United States (X units), with a X% share.

From 2012 to 2021, the average annual rate of growth in terms of volume from China amounted to -X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (-X% per year) and the United States (-X% per year).

In value terms, China ($X), Germany ($X) and Thailand ($X) appeared to be the largest machine-tool for removing material suppliers to Japan, together accounting for X% of total imports. These countries were followed by the United States, Switzerland, Italy and Austria, which together accounted for a further X terms of the main suppliers, Italy, with a CAGR of +X%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

The average machine-tool for removing material import price stood at $X per unit in 2021, falling by -X% against the previous year. Overall, the import price, however, posted a noticeable increase. The most prominent rate of growth was recorded in 2018 an increase of X% year-to-year. As a result, import price reached the peak level of $X per unit. From 2019 to 2021, the average import prices remained at a lower figure.

Prices varied noticeably by the country of origin: the country with the highest price was Thailand ($X per unit), while the price for China ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Thailand (+X%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Base Year Historical Period Forecast Period Units
2021 2007-2021 2022-2030 US$, Tonnes

Frequently Asked Questions (FAQ) :

What are the largest markets for machine-tools for working any material by removal of material in the world?
+
The country with the largest volume of machine-tool for removing material consumption was South Africa, comprising approx. 59% of total volume. Moreover, machine-tool for removing material consumption in South Africa exceeded the figures recorded by the second-largest consumer, Japan, fourfold. The third position in this ranking was occupied by South Korea, with a 5.2% share.
What are the largest producers of machine-tools for working any material by removal of material in the world?
+
Japan constituted the country with the largest volume of machine-tool for removing material production, comprising approx. 58% of total volume. Moreover, machine-tool for removing material production in Japan exceeded the figures recorded by the second-largest producer, China, twofold. The third position in this ranking was occupied by Switzerland, with a 3.1% share.
What are the leading suppliers of machine-tools for working any material by removal of material to Japan?
+
In value terms, the largest machine-tool for removing material suppliers to Japan were China, Germany and Thailand, together accounting for 64% of total imports. These countries were followed by the United States, Switzerland, Italy and Austria, which together accounted for a further 21%.
What are the leading importers of machine-tools for working any material by removal of material from Japan?
+
In value terms, China, the United States and Taiwan Chinese) were the largest markets for machine-tool for removing material exported from Japan worldwide, with a combined 59% share of total exports. These countries were followed by South Korea, Hong Kong SAR, Belgium, Germany, Thailand, Luxembourg and Italy, which together accounted for a further 29%.
What is the average export price for machine-tools for working any material by removal of material in Japan?
+
In 2021, the average machine-tool for removing material export price amounted to $16,648 per unit, surging by 17% against the previous year.
What is the average import price for machine-tools for working any material by removal of material in Japan?
+
The average machine-tool for removing material import price stood at $14,839 per unit in 2021, dropping by -8.9% against the previous year.

This report provides an in-depth analysis of the market for machine-tool for removing material in Japan. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Product coverage:
• Prodcom 28411110 - Machine-tools for working any material by removal of material, operated by laser or other light or photon beam processes
• Prodcom 28411130 - Machine-tools for working any material by removal of material, operated by ultrasonic processes (excluding machines for the manufacture of semiconductor devices or of electronic integrated circuits)
• Prodcom 28411150 - Machine tools for working any material by removal of material, operated by electro-discharge processes
• Prodcom 28411170 - Machine-tools for working any material by removal of material, operated by electro-chemical, electron-beam, ionicbeam or plasma arc processes
Country coverage:
• Japan

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in Japan
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2012–2021
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2012–2021
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2021
Table 2:
Market Volume, In Physical Terms, 2012–2021
Table 3:
Market Value, 2012–2021
Table 4:
Per Capita Consumption In 2012–2021
Table 5:
Imports, In Physical Terms, By Country, 2012–2021
Table 6:
Imports, In Value Terms, By Country, 2012–2021
Table 7:
Import Prices, By Country Of Origin, 2012–2021
Table 8:
Exports, In Physical Terms, By Country, 2012–2021
Table 9:
Exports, In Value Terms, By Country, 2012–2021
Table 10:
Export Prices, By Country Of Destination, 2012–2021
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2012–2021
Figure 2:
Market Value, 2012–2021
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012–2021
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012–2021
Figure 5:
Trade Balance, In Physical Terms, 2012–2021
Figure 6:
Trade Balance, In Value Terms, 2012–2021
Figure 7:
Per Capita Consumption, 2012–2021
Figure 8:
Market Forecast To 2030
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2012–2021
Figure 21:
Production, In Value Terms, 2012–2021
Figure 22:
Imports, In Physical Terms, 2012–2021
Figure 23:
Imports, In Value Terms, 2012–2021
Figure 24:
Imports, In Physical Terms, By Country, 2021
Figure 25:
Imports, In Physical Terms, By Country, 2012–2021
Figure 26:
Imports, In Value Terms, By Country, 2012–2021
Figure 27:
Import Prices, By Country Of Origin, 2012–2021
Figure 28:
Exports, In Physical Terms, 2012–2021
Figure 29:
Exports, In Value Terms, 2012–2021
Figure 30:
Exports, In Physical Terms, By Country, 2021
Figure 31:
Exports, In Physical Terms, By Country, 2012–2021
Figure 32:
Exports, In Value Terms, By Country, 2012–2021
Figure 33:
Export Prices, By Country Of Destination, 2012–2021
Webinar: Decarbonisation and Your Business Strategy - Steps and Practices

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, January 25th, 2022 @ 04:00 pm ET

Webinar: Global Metal Tank Market - Statistics, Trends, and Outlook

Join our live webinar to get insights into the global metal tank market.



Thursday, April 15th, 2021 @ 04:00 pm ET

Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data