EU - Non-Numerically Controlled Sharpening Machines for Working Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEU: Market for Non-Numerically Controlled Sharpening Machines For Working Metal 2024
Market Size for Non-Numerically Controlled Sharpening Machines For Working Metal in the EU
The EU non-numerically controlled sharpening machine market declined sharply to $X in 2022, waning by X% against the previous year. The total consumption indicated modest growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by X% against 2016 indices. As a result, consumption reached the peak level of $X, and then reduced sharply in the following year.
Production of Non-Numerically Controlled Sharpening Machines For Working Metal in the EU
In value terms, non-numerically controlled sharpening machine production contracted to $X in 2022 estimated in export price. Overall, production, however, showed a pronounced shrinkage. The pace of growth appeared the most rapid in 2019 when the production volume increased by X% against the previous year. Over the period under review, production reached the peak level at $X in 2012; however, from 2013 to 2022, production failed to regain momentum.
Exports of Non-Numerically Controlled Sharpening Machines For Working Metal
Exports in the EU
In 2022, after two years of decline, there was growth in shipments abroad of non-numerically controlled sharpening machines for working metal, when their volume increased by X% to X units. Over the period under review, exports showed a strong increase. The pace of growth was the most pronounced in 2018 with an increase of X%. The volume of export peaked at X units in 2019; however, from 2020 to 2022, the exports remained at a lower figure.
In value terms, non-numerically controlled sharpening machine exports fell modestly to $X in 2022. The total export value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern remained relatively stable, with only minor fluctuations throughout the analyzed period. The most prominent rate of growth was recorded in 2018 with an increase of X% against the previous year. Over the period under review, the exports attained the maximum at $X in 2021, and then reduced modestly in the following year.
Exports by Country
Germany was the main exporting country with an export of around X units, which recorded X% of total exports. It was distantly followed by Austria (X units), the Netherlands (X units), Belgium (X units), Spain (X units) and Sweden (X units), together mixing up a X% share of total exports. France (X units) followed a long way behind the leaders.
From 2012 to 2022, average annual rates of growth with regard to non-numerically controlled sharpening machine exports from Germany stood at X%. At the same time, Spain (X%), Belgium (X%), Sweden (X%), Austria (X%), the Netherlands (X%) and France (X%) displayed positive paces of growth. Moreover, Spain emerged as the fastest-growing exporter exported in the European Union, with a CAGR of X% from 2012-2022. Belgium (X p.p.), Spain (X p.p.), Austria (X p.p.) and Sweden (X p.p.) significantly strengthened its position in terms of the total exports, while France, Germany and the Netherlands saw its share reduced by X%, X% and X% from 2012 to 2022, respectively.
In value terms, Germany ($X), Sweden ($X) and Austria ($X) constituted the countries with the highest levels of exports in 2022, together comprising X% of total exports. The Netherlands, Belgium, France and Spain lagged somewhat behind, together accounting for a further X%.
Among the main exporting countries, Belgium, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The export price in the European Union stood at $X per unit in 2022, which is down by X% against the previous year. Overall, the export price recorded a drastic downturn. The most prominent rate of growth was recorded in 2021 an increase of X% against the previous year. The level of export peaked at $X per unit in 2012; however, from 2013 to 2022, the export prices failed to regain momentum.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Sweden ($X per unit), while Spain ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by France (X%), while the other leaders experienced a decline in the export price figures.
Imports of Non-Numerically Controlled Sharpening Machines For Working Metal
Imports in the EU
In 2022, supplies from abroad of non-numerically controlled sharpening machines for working metal decreased by X% to X units, falling for the second consecutive year after four years of growth. In general, imports, however, posted a notable expansion. The pace of growth appeared the most rapid in 2018 when imports increased by X% against the previous year. The volume of import peaked at X units in 2020; however, from 2021 to 2022, imports failed to regain momentum.
In value terms, non-numerically controlled sharpening machine imports reduced to $X in 2022. Total imports indicated notable growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2016 indices. The pace of growth appeared the most rapid in 2018 with an increase of X%. The level of import peaked at $X in 2021, and then dropped in the following year.
Imports by Country
The countries with the highest levels of non-numerically controlled sharpening machine imports in 2022 were Germany (X units), the Netherlands (X units), France (X units), Austria (X units), Spain (X units) and Poland (X units), together reaching X% of total import. Romania (X units) took the next position in the ranking, followed by Italy (X units). All these countries together held near X% share of total imports. The following importers - the Czech Republic (X units), Belgium (X units), Portugal (X units), Sweden (X units) and Hungary (X units) - together made up X% of total imports.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main importing countries, was attained by Romania (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) constitutes the largest market for imported non-numerically controlled sharpening machines for working metal in the European Union, comprising X% of total imports. The second position in the ranking was taken by France ($X), with an X% share of total imports. It was followed by Austria, with a X% share.
From 2012 to 2022, the average annual growth rate of value in Germany totaled X%. In the other countries, the average annual rates were as follows: France (X% per year) and Austria (X% per year).
Import Prices by Country
The import price in the European Union stood at $X per unit in 2022, picking up by X% against the previous year. Overall, the import price, however, continues to indicate a slight reduction. The pace of growth was the most pronounced in 2021 an increase of X%. Over the period under review, import prices hit record highs at $X per unit in 2013; however, from 2014 to 2022, import prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Germany ($X per unit), while Spain ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Germany (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for non-numerically controlled sharpening machine in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28412375 - Non-numerically controlled sharpening (tool or cutter grinding) machines for working metal
Country coverage:
- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in the EU, split by region and country
- Trade (exports and imports) in the EU
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for non-numerically controlled sharpening machine in Asia.
This report provides an in-depth analysis of the market for non-numerically controlled sharpening machine in the U.S..
This report provides an in-depth analysis of the market for non-numerically controlled sharpening machine in China.
This report provides an in-depth analysis of the global market for non-numerically controlled sharpening machine.
- Non-Numerically Controlled Sharpening Machine Market
- Machine-Tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-Station Transfer Machine Market
- Lathe for Removing Metal Market
- Non-Numerically Controlled Lathe Market
- Way-Type Unit Head Market
- Numerically Controlled Drilling Machine Market
- Non-Numerically Controlled Drilling Machine Market