Cote d'Ivoire - Machine Tools for Working Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCote d'Ivoire: Market for Machine Tools For Working Metal 2024
Market Size for Machine Tools For Working Metal in Cote d'Ivoire
In 2022, the Cote d'Ivoire's machine-tool for working metal market decreased by X% to $X, falling for the second year in a row after two years of growth. In general, the total consumption indicated a temperate increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2020 indices. As a result, consumption reached the peak level of $X. From 2014 to 2022, the growth of the market failed to regain momentum.
Exports of Machine Tools For Working Metal
Exports from Cote d'Ivoire
In 2022, machine-tool for working metal exports from Cote d'Ivoire skyrocketed to X units, growing by X% on the previous year. In general, exports continue to indicate buoyant growth. The pace of growth appeared the most rapid in 2019 when exports increased by X%. As a result, the exports reached the peak of X units. From 2020 to 2022, the growth of the exports remained at a lower figure.
In value terms, machine-tool for working metal exports surged to $X in 2022. Over the period under review, exports enjoyed resilient growth. The most prominent rate of growth was recorded in 2016 with an increase of X% against the previous year. Over the period under review, the exports reached the maximum at $X in 2019; however, from 2020 to 2022, the exports stood at a somewhat lower figure.
Exports by Country
Guinea (X units) was the main destination for machine-tool for working metal exports from Cote d'Ivoire, accounting for a X% share of total exports. Moreover, machine-tool for working metal exports to Guinea exceeded the volume sent to the second major destination, Ghana (X units), tenfold. The third position in this ranking was taken by Egypt (X units), with a X% share.
From 2012 to 2022, the average annual growth rate of volume to Guinea stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Ghana (X% per year) and Egypt (X% per year).
In value terms, Ghana ($X) remains the key foreign market for machine tools for working metal exports from Cote d'Ivoire, comprising X% of total exports. The second position in the ranking was held by Guinea ($X), with a X% share of total exports. It was followed by Egypt, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value to Ghana totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Guinea (X% per year) and Egypt (X% per year).
Export Prices by Country
In 2022, the average machine-tool for working metal export price amounted to $X per unit, increasing by X% against the previous year. Overall, the export price continues to indicate perceptible growth. The pace of growth was the most pronounced in 2016 an increase of X% against the previous year. As a result, the export price reached the peak level of $X per unit. From 2017 to 2022, the average export prices remained at a lower figure.
There were significant differences in the average prices for the major foreign markets. In 2022, amid the top suppliers, the country with the highest price was Ghana ($X per unit), while the average price for exports to Cameroon ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Ghana (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Machine Tools For Working Metal
Imports into Cote d'Ivoire
After two years of decline, purchases abroad of machine tools for working metal increased by X% to X units in 2022. In general, total imports indicated a modest expansion from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2017 when imports increased by X%. Imports peaked at X units in 2013; however, from 2014 to 2022, imports failed to regain momentum.
In value terms, machine-tool for working metal imports dropped significantly to $X in 2022. Over the period under review, imports showed a moderate expansion. The most prominent rate of growth was recorded in 2019 when imports increased by X%. As a result, imports reached the peak of $X. From 2020 to 2022, the growth of imports remained at a somewhat lower figure.
Imports by Country
Vietnam (X units), China (X units) and Turkey (X units) were the main suppliers of machine-tool for working metal imports to Cote d'Ivoire, with a combined X% share of total imports.
From 2012 to 2022, the biggest increases were recorded for Turkey (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, China ($X), Turkey ($X) and Italy ($X) appeared to be the largest machine-tool for working metal suppliers to Cote d'Ivoire, with a combined X% share of total imports. France, Spain, Vietnam, India, Singapore, South Africa, Tunisia and Australia lagged somewhat behind, together comprising a further X%.
Among the main suppliers, Tunisia, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average machine-tool for working metal import price amounted to $X per unit, reducing by X% against the previous year. In general, the import price, however, saw measured growth. The growth pace was the most rapid in 2019 when the average import price increased by X% against the previous year. Over the period under review, average import prices hit record highs at $X per unit in 2021, and then reduced remarkably in the following year.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Spain ($X per unit), while the price for Vietnam ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Tunisia (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for machine-tool for working metal in Cote d'Ivoire. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28413120 - Numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)
- Prodcom 28413140 - Numerically controlled bending, folding, straightening or flattening machines for working metal (including presses) (excluding those for working flat metal products)
- Prodcom 28413160 - Non-numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)
- Prodcom 28413180 - Non-numerically controlled bending, folding, straightening or flattening machines for working metal (including presses) (excluding those for working flat metal products)
- Prodcom 28413220 - Numerically controlled shearing machines for working metal (including presses) (excluding combined punching and shearing machines)
- Prodcom 28413240 - Numerically controlled punching or notching machines for working metal (including presses, combined punching and shearing machines)
- Prodcom 28413260 - Non-numerically controlled shearing machines for working metal (including presses) (excluding combined punching and shearing machines)
- Prodcom 28413280 - Non-numerically controlled punching or notching machines for working metal (including presses, combined punching and shearing machines)
- Prodcom 28413310 - Numerically controlled forging or die-stamping machines and hammers for working metal (including presses)
- Prodcom 28413320 - Non-numerically controlled forging or die-stamping machines and hammers for working metal (including presses)
- Prodcom 28413330 -
- Prodcom 28413340 -
- Prodcom 28413370 -
- Prodcom 28413380 -
Country coverage:
- Cote d'Ivoire
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Cote d'Ivoire
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for machine-tool for working metal in Asia.
This report provides an in-depth analysis of the market for machine-tool for working metal in the U.S..
This report provides an in-depth analysis of the market for machine-tool for working metal in China.
This report provides an in-depth analysis of the market for machine-tool for working metal in the EU.
This report provides an in-depth analysis of the global market for machine-tool for working metal.
- Machine-Tool for Working Metal Market
- Machine-Tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-Station Transfer Machine Market
- Lathe for Removing Metal Market
- Non-Numerically Controlled Lathe Market
- Way-Type Unit Head Market
- Numerically Controlled Drilling Machine Market
- Non-Numerically Controlled Drilling Machine Market