World - Flat-Rolled Steel in Coils - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingGlobal Flat-Rolled Steel Coils Market 2024
Flat-Rolled Steel Coils Market Size
The global flat-rolled steel coils market shrank slightly to $X in 2023, approximately reflecting the previous year. In general, consumption, however, recorded a relatively flat trend pattern. As a result, consumption reached the peak level of $X. From 2022 to 2023, the growth of the global market remained at a somewhat lower figure.
Flat-Rolled Steel Coils Production
In value terms, flat-rolled steel coils production rose remarkably to $X in 2023 estimated in export price. Overall, production, however, continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2021 when the production volume increased by X% against the previous year. As a result, production reached the peak level of $X. From 2022 to 2023, global production growth remained at a lower figure.
Flat-Rolled Steel Coils Exports
Exports
In 2023, approx. X tons of flat-rolled steel in coils were exported worldwide; surging by X% on 2022. The total export volume increased at an average annual rate of X% from 2012 to 2023; the trend pattern remained relatively stable, with somewhat noticeable fluctuations in certain years. The pace of growth was the most pronounced in 2021 when exports increased by X% against the previous year. Over the period under review, the global exports hit record highs at X tons in 2017; however, from 2018 to 2023, the exports failed to regain momentum.
In value terms, flat-rolled steel coils exports declined to $X in 2023. Over the period under review, total exports indicated a modest expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports decreased by X% against 2021 indices. The growth pace was the most rapid in 2021 when exports increased by X%. As a result, the exports reached the peak of $X. From 2022 to 2023, the growth of the global exports remained at a somewhat lower figure.
Exports by Country
In 2023, China (X tons), distantly followed by Japan (X tons), South Korea (X tons), Russia (X tons) and Taiwan (Chinese) (X tons) were the major exporters of flat-rolled steel in coils, together committing X% of total exports. Belgium (X tons), India (X tons), Germany (X tons), Finland (X tons), France (X tons), the Netherlands (X tons), Canada (X tons) and the United States (X tons) followed a long way behind the leaders.
From 2012 to 2023, the most notable rate of growth in terms of shipments, amongst the main exporting countries, was attained by Finland (with a CAGR of X%), while the other global leaders experienced more modest paces of growth.
In value terms, China ($X), Japan ($X) and South Korea ($X) appeared to be the countries with the highest levels of exports in 2023, with a combined X% share of global exports. Taiwan (Chinese), Russia, Belgium, Germany, India, France, Finland, Canada, the Netherlands and the United States lagged somewhat behind, together accounting for a further X%.
Finland, with a CAGR of X%, saw the highest growth rate of the value of exports, in terms of the main exporting countries over the period under review, while shipments for the other global leaders experienced more modest paces of growth.
Export Prices by Country
In 2023, the average flat-rolled steel coils export price amounted to $X per ton, falling by X% against the previous year. In general, the export price, however, showed a relatively flat trend pattern. The growth pace was the most rapid in 2021 an increase of X%. Over the period under review, the average export prices hit record highs at $X per ton in 2022, and then fell in the following year.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was the United States ($X per ton), while China ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the other global leaders experienced more modest paces of growth.
Flat-Rolled Steel Coils Imports
Imports
Global flat-rolled steel coils imports rose slightly to X tons in 2023, growing by X% on the previous year's figure. In general, imports showed a relatively flat trend pattern. The growth pace was the most rapid in 2021 when imports increased by X% against the previous year. Over the period under review, global imports reached the maximum at X tons in 2017; however, from 2018 to 2023, imports remained at a lower figure.
In value terms, flat-rolled steel coils imports contracted to $X in 2023. Overall, total imports indicated a mild expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The pace of growth appeared the most rapid in 2021 with an increase of X%. As a result, imports reached the peak of $X. From 2022 to 2023, the growth of global imports remained at a somewhat lower figure.
Imports by Country
In 2023, Italy (X tons), Turkey (X tons), Vietnam (X tons), Thailand (X tons), the United States (X tons), Spain (X tons), South Korea (X tons), India (X tons), Mexico (X tons), Poland (X tons), Belgium (X tons) and Germany (X tons) was the largest importer of flat-rolled steel in coils in the world, making up X% of total import. Malaysia (X tons) took a little share of total imports.
From 2012 to 2023, the biggest increases were recorded for Italy (with a CAGR of X%), while purchases for the other global leaders experienced more modest paces of growth.
In value terms, Italy ($X), Vietnam ($X) and Turkey ($X) were the countries with the highest levels of imports in 2023, with a combined X% share of global imports.
Italy, with a CAGR of X%, saw the highest growth rate of the value of imports, in terms of the main importing countries over the period under review, while purchases for the other global leaders experienced more modest paces of growth.
Import Prices by Country
In 2023, the average flat-rolled steel coils import price amounted to $X per ton, dropping by X% against the previous year. In general, import price indicated a slight expansion from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2021 when the average import price increased by X%. Global import price peaked at $X per ton in 2022, and then shrank in the following year.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Mexico ($X per ton), while India ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Vietnam (X%), while the other global leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the global flat-rolled steel coils market. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103310 - Hot-rolled flat products in coil for rerolling of a width of .600 mm or more, of stainless steel
- Prodcom 24103320 - Other hot-rolled flat products in coil of a width of .600 mm or more, of stainless steel
- Prodcom 24103410 - Hot-rolled flat products in coil for rerolling of a width of less than .600 mm, of stainless steel
- Prodcom 24103420 - Other hot-rolled flat products in coil of a width of less than .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24104110 - Uncoated cold-rolled sheet, plate and strip of a width . .600 mm, of steel other than stainless steel
- Prodcom 24104130 - Electrical sheet and strip not finally annealed of a width of .600 mm or more
- Prodcom 24104150 - Electrical sheet and strip, grain non-oriented of a width . .600 mm
Country coverage:
Worldwide - the report contains statistical data for 200 countries and includes detailed profiles of the 50 largest consuming countries:
- USA
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
+ the largest producing countries
Data coverage:
- Global market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Global production, split by region and country
- Global trade (exports and imports)
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. GLOBAL PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. GLOBAL IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. GLOBAL EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- United States
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the flat-rolled steel coils market in Asia.
This report provides an in-depth analysis of the flat-rolled steel coils market in the U.S..
This report provides an in-depth analysis of the flat-rolled steel coils market in China.
This report provides an in-depth analysis of the flat-rolled steel coils market in the EU.
- Flat-Rolled Steel Coils Market
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market