Italy - Flat-Rolled Steel in Coils - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingItaly: Flat-Rolled Steel Coils Market 2024
Flat-Rolled Steel Coils Market Size in Italy
After two years of growth, the Italian flat-rolled steel coils market decreased by X% to $X in 2023. In general, consumption, however, continues to indicate a noticeable increase. Over the period under review, the market reached the maximum level at $X in 2022, and then declined in the following year.
Flat-Rolled Steel Coils Production in Italy
In value terms, flat-rolled steel coils production shrank to $X in 2023 estimated in export price. In general, production, however, showed tangible growth. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. Flat-rolled steel coils production peaked at $X in 2022, and then declined in the following year.
Flat-Rolled Steel Coils Exports
Exports from Italy
In 2023, shipments abroad of flat-rolled steel in coils was finally on the rise to reach X tons for the first time since 2019, thus ending a three-year declining trend. Overall, exports, however, recorded a abrupt shrinkage. Over the period under review, the exports reached the maximum at X tons in 2012; however, from 2013 to 2023, the exports stood at a somewhat lower figure.
In value terms, flat-rolled steel coils exports reached $X in 2023. In general, exports, however, showed a abrupt slump. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. The exports peaked at $X in 2012; however, from 2013 to 2023, the exports failed to regain momentum.
Exports by Country
Germany (X tons), Spain (X tons) and Poland (X tons) were the main destinations of flat-rolled steel coils exports from Italy, with a combined X% share of total exports. France, Austria, the Czech Republic, Mexico, Belgium, Croatia, Slovenia, Portugal, Egypt and Greece lagged somewhat behind, together accounting for a further X%.
From 2012 to 2023, the biggest increases were recorded for Mexico (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X), France ($X) and Poland ($X) appeared to be the largest markets for flat-rolled steel coils exported from Italy worldwide, together accounting for X% of total exports. Spain, Austria, the Czech Republic, Mexico, Belgium, Slovenia, Croatia, Portugal, Greece and Egypt lagged somewhat behind, together comprising a further X%.
In terms of the main countries of destination, Mexico, with a CAGR of X%, saw the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2023, the average flat-rolled steel coils export price amounted to $X per ton, waning by X% against the previous year. Overall, the export price, however, saw a temperate increase. The pace of growth appeared the most rapid in 2021 when the average export price increased by X% against the previous year. Over the period under review, the average export prices hit record highs at $X per ton in 2022, and then shrank in the following year.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was France ($X per ton), while the average price for exports to Egypt ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to France (X%), while the prices for the other major destinations experienced more modest paces of growth.
Flat-Rolled Steel Coils Imports
Imports into Italy
In 2023, approx. X tons of flat-rolled steel in coils were imported into Italy; with an increase of X% against 2022 figures. In general, total imports indicated a prominent expansion from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2020 indices. The pace of growth appeared the most rapid in 2013 with an increase of X%. Imports peaked at X tons in 2015; however, from 2016 to 2023, imports remained at a lower figure.
In value terms, flat-rolled steel coils imports contracted sharply to $X in 2023. Over the period under review, imports showed a buoyant expansion. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Imports peaked at $X in 2022, and then shrank significantly in the following year.
Imports by Country
India (X tons), Vietnam (X tons) and France (X tons) were the main suppliers of flat-rolled steel coils imports to Italy, with a combined X% share of total imports. Germany, South Korea, Japan, Turkey, Taiwan (Chinese), Austria, Egypt, Belgium, Sweden and Australia lagged somewhat behind, together accounting for a further X%.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Japan (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest flat-rolled steel coils suppliers to Italy were India ($X), France ($X) and Germany ($X), with a combined X% share of total imports. Vietnam, South Korea, Japan, Austria, Turkey, Taiwan (Chinese), Egypt, Belgium, Sweden and Australia lagged somewhat behind, together accounting for a further X%.
Among the main suppliers, Japan, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average flat-rolled steel coils import price stood at $X per ton in 2023, waning by X% against the previous year. In general, the import price, however, recorded a mild increase. The growth pace was the most rapid in 2021 an increase of X% against the previous year. The import price peaked at $X per ton in 2022, and then shrank notably in the following year.
Average prices varied somewhat amongst the major supplying countries. In 2023, amid the top importers, the highest price was recorded for prices from Sweden ($X per ton) and Germany ($X per ton), while the price for Australia ($X per ton) and Vietnam ($X per ton) were amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Germany (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the flat-rolled steel coils market in Italy. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103310 - Hot-rolled flat products in coil for rerolling of a width of .600 mm or more, of stainless steel
- Prodcom 24103320 - Other hot-rolled flat products in coil of a width of .600 mm or more, of stainless steel
- Prodcom 24103410 - Hot-rolled flat products in coil for rerolling of a width of less than .600 mm, of stainless steel
- Prodcom 24103420 - Other hot-rolled flat products in coil of a width of less than .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24104110 - Uncoated cold-rolled sheet, plate and strip of a width . .600 mm, of steel other than stainless steel
- Prodcom 24104130 - Electrical sheet and strip not finally annealed of a width of .600 mm or more
- Prodcom 24104150 - Electrical sheet and strip, grain non-oriented of a width . .600 mm
Country coverage:
- Italy
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Italy
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the flat-rolled steel coils market in Asia.
This report provides an in-depth analysis of the flat-rolled steel coils market in the U.S..
This report provides an in-depth analysis of the flat-rolled steel coils market in China.
This report provides an in-depth analysis of the flat-rolled steel coils market in the EU.
This report provides an in-depth analysis of the global flat-rolled steel coils market.
- Flat-Rolled Steel Coils Market
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market