World - Aluminium Tube or Pipe Fittings - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingGlobal Aluminium Pipe Fittings Market 2024
Aluminium Pipe Fittings Market Size
The global aluminium pipe fittings market reduced to $X in 2022, falling by X% against the previous year. In general, consumption, however, enjoyed resilient growth. As a result, consumption attained the peak level of $X, and then reduced in the following year.
Aluminium Pipe Fittings Production
In value terms, aluminium pipe fittings production expanded remarkably to $X in 2022 estimated in export price. In general, the total production indicated tangible growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2019 indices. The growth pace was the most rapid in 2014 when the production volume increased by X% against the previous year. Global production peaked at $X in 2019; however, from 2020 to 2022, production stood at a somewhat lower figure.
Aluminium Pipe Fittings Exports
Exports
In 2022, overseas shipments of aluminium tube or pipe fittings increased by X% to X tons, rising for the second consecutive year after three years of decline. The total export volume increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2017 when exports increased by X%. Over the period under review, the global exports reached the maximum in 2022 and are expected to retain growth in the immediate term.
In value terms, aluminium pipe fittings exports rose remarkably to $X in 2022. The total export value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2021 when exports increased by X%. The global exports peaked in 2022 and are likely to see gradual growth in the immediate term.
Exports by Country
China was the main exporter of aluminium tube or pipe fittings in the world, with the volume of exports accounting for X tons, which was near X% of total exports in 2022. The United States (X tons) held a X% share (based on physical terms) of total exports, which put it in second place, followed by Italy (X%) and India (X%). Germany (X tons), Turkey (X tons), South Korea (X tons), Spain (X tons), the Netherlands (X tons), the Czech Republic (X tons), Taiwan (Chinese) (X tons) and Vietnam (X tons) took a minor share of total exports.
From 2012 to 2022, average annual rates of growth with regard to aluminium pipe fittings exports from China stood at X%. At the same time, India (X%), the Czech Republic (X%), Vietnam (X%), Italy (X%), Turkey (X%), Germany (X%), South Korea (X%), the Netherlands (X%) and Taiwan (Chinese) (X%) displayed positive paces of growth. Moreover, India emerged as the fastest-growing exporter exported in the world, with a CAGR of X% from 2012-2022. Spain and the United States experienced a relatively flat trend pattern. From 2012 to 2022, the share of China, India, Italy, Turkey and the Czech Republic increased by X, X, X, X and X percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, China ($X) remains the largest aluminium pipe fittings supplier worldwide, comprising X% of global exports. The second position in the ranking was taken by the United States ($X), with a X% share of global exports. It was followed by Germany, with an X% share.
In China, aluminium pipe fittings exports expanded at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: the United States (X% per year) and Germany (X% per year).
Export Prices by Country
The average aluminium pipe fittings export price stood at $X per ton in 2022, with an increase of X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The pace of growth appeared the most rapid in 2013 when the average export price increased by X% against the previous year. Over the period under review, the average export prices attained the maximum in 2022 and is expected to retain growth in the near future.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Germany ($X per ton), while India ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Spain (X%), while the other global leaders experienced more modest paces of growth.
Aluminium Pipe Fittings Imports
Imports
In 2022, overseas purchases of aluminium tube or pipe fittings increased by X% to X tons, rising for the second year in a row after two years of decline. The total import volume increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2021 when imports increased by X%. Over the period under review, global imports attained the maximum in 2022 and are expected to retain growth in the immediate term.
In value terms, aluminium pipe fittings imports rose markedly to $X in 2022. The total import value increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when imports increased by X% against the previous year. Over the period under review, global imports hit record highs in 2022 and are likely to continue growth in years to come.
Imports by Country
In 2022, the United States (X tons), Mexico (X tons), Canada (X tons) and Germany (X tons) was the major importer of aluminium tube or pipe fittings in the world, creating X% of total import. The following importers - the Czech Republic (X tons), the Netherlands (X tons), Poland (X tons), Spain (X tons), the UK (X tons), France (X tons), China (X tons), Malaysia (X tons) and Belgium (X tons) - together made up X% of total imports.
From 2012 to 2022, the biggest increases were recorded for Poland (with a CAGR of X%), while purchases for the other global leaders experienced more modest paces of growth.
In value terms, Mexico ($X), the United States ($X) and Canada ($X) appeared to be the countries with the highest levels of imports in 2022, together accounting for X% of global imports. Germany, China, the Czech Republic, the Netherlands, the UK, France, Spain, Poland, Belgium and Malaysia lagged somewhat behind, together accounting for a further X%.
The Czech Republic, with a CAGR of X%, saw the highest growth rate of the value of imports, in terms of the main importing countries over the period under review, while purchases for the other global leaders experienced more modest paces of growth.
Import Prices by Country
The average aluminium pipe fittings import price stood at $X per ton in 2022, increasing by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2018 when the average import price increased by X% against the previous year. Global import price peaked in 2022 and is expected to retain growth in the near future.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was China ($X per ton), while Malaysia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Spain (X%), while the other global leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the global aluminium pipe fittings market. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24422670 - Aluminium tube or pipe fittings (including couplings, elbows and sleeves) (excluding fittings with taps, cocks and valves, t ube supports, bolts and nuts, clamps)
Country coverage:
Worldwide - the report contains statistical data for 200 countries and includes detailed profiles of the 50 largest consuming countries:
- USA
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
+ the largest producing countries
Data coverage:
- Global market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Global production, split by region and country
- Global trade (exports and imports)
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. GLOBAL PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. GLOBAL IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. GLOBAL EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- United States
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the aluminium pipe fittings market in Asia.
This report provides an in-depth analysis of the aluminium pipe fittings market in the U.S..
This report provides an in-depth analysis of the aluminium pipe fittings market in China.
This report provides an in-depth analysis of the aluminium pipe fittings market in the EU.