Singapore - Flat-Rolled Products of Iron or Steel (Not Further Worked Than Cold-Rolled) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSingapore: Cold-Rolled Steel Products Market 2024
Cold-Rolled Steel Products Market Size in Singapore
In 2022, the Singaporean cold-rolled steel products market increased by X% to $X, rising for the second year in a row after two years of decline. In general, the total consumption indicated a slight expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by X% against 2020 indices. As a result, consumption attained the peak level and is likely to continue growth in the immediate term.
Cold-Rolled Steel Products Exports
Exports from Singapore
After four years of decline, overseas shipments of flat-rolled products of iron or steel (not further worked than cold-rolled) increased by X% to X tons in 2022. Overall, exports recorded a relatively flat trend pattern. The exports peaked at X tons in 2014; however, from 2015 to 2022, the exports remained at a lower figure.
In value terms, cold-rolled steel products exports soared to $X in 2022. Over the period under review, exports showed a resilient increase. As a result, the exports reached the peak and are likely to continue growth in the immediate term.
Exports by Country
Malaysia (X tons), Hong Kong SAR (X tons) and New Zealand (X tons) were the main destinations of cold-rolled steel products exports from Singapore, together comprising X% of total exports.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by New Zealand (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, Hong Kong SAR ($X) emerged as the key foreign market for flat-rolled products of iron or steel (not further worked than cold-rolled) exports from Singapore, comprising X% of total exports. The second position in the ranking was taken by New Zealand ($X), with a X% share of total exports. It was followed by China, with a X% share.
From 2012 to 2022, the average annual growth rate of value to Hong Kong SAR amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: New Zealand (X% per year) and China (X% per year).
Export Prices by Country
The average cold-rolled steel products export price stood at $X per ton in 2022, rising by X% against the previous year. In general, the export price recorded a prominent expansion. As a result, the export price reached the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was China ($X per ton), while the average price for exports to India ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Israel (X%), while the prices for the other major destinations experienced more modest paces of growth.
Cold-Rolled Steel Products Imports
Imports into Singapore
In 2022, overseas purchases of flat-rolled products of iron or steel (not further worked than cold-rolled) increased by X% to X tons, rising for the second consecutive year after two years of decline. The total import volume increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, imports reached the peak and are likely to continue growth in the immediate term.
In value terms, cold-rolled steel products imports surged to $X in 2022. Over the period under review, total imports indicated mild growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. As a result, imports attained the peak and are likely to continue growth in the immediate term.
Imports by Country
In 2022, Japan (X tons) constituted the largest cold-rolled steel products supplier to Singapore, accounting for a X% share of total imports. Moreover, cold-rolled steel products imports from Japan exceeded the figures recorded by the second-largest supplier, Taiwan (Chinese) (X tons), fivefold. China (X tons) ranked third in terms of total imports with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume from Japan amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (X% per year) and China (X% per year).
In value terms, Japan ($X) constituted the largest supplier of flat-rolled products of iron or steel (not further worked than cold-rolled) to Singapore, comprising X% of total imports. The second position in the ranking was taken by China ($X), with a X% share of total imports. It was followed by Taiwan (Chinese), with a X% share.
From 2012 to 2022, the average annual growth rate of value from Japan amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and Taiwan (Chinese) (X% per year).
Import Prices by Country
In 2022, the average cold-rolled steel products import price amounted to $X per ton, picking up by X% against the previous year. Overall, the import price, however, continues to indicate a relatively flat trend pattern. Over the period under review, average import prices attained the peak figure at $X per ton in 2012; however, from 2013 to 2022, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Malaysia ($X per ton), while the price for Vietnam ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Vietnam (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the cold-rolled steel products market in Singapore. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103520 - Flat-rolled products of high-speed steel, of a width . .600 mm, h ot-rolled or cold-rolled
- Prodcom 24104150 - Electrical sheet and strip, grain non-oriented of a width . .600 mm
- Prodcom 241041Z0 - Uncoated cold-rolled sheet, plate and strip (including electrical sheet and strip not finally annealed), of a width . .600 mm, of steel other than stainless steel
- Prodcom 24104200 - Cold-rolled sheet, plate and wide strip of a width of .600 mm or more (of stainless steel)
- Prodcom 24104300 - Flat-rolled products of alloy steel other than stainless, of a width of . .600 mm, simply cold-rolled (excluding products of high-speed steel or silicon-electrical steel)
- Prodcom 24321025 - Flat-rolled products of iron or non-alloy steel, of a width of < .600 mm, simply cold-rolled
- Prodcom 243210Z1 - Cold-rolled narrow strip and cold-rolled slit strip, of non-alloy steel and of alloy steel (other than stainless steel), of a width < .600 mm
- Prodcom 243210Z2 - Cold-rolled narrow strip and cold-rolled slit strip, of stainless steel (excluding insulated electric strip, corrugated strip with one edge serrated or bevelled), of a width < .600 mm
Country coverage:
- Singapore
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Singapore
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the cold-rolled steel products market in Asia.
This report provides an in-depth analysis of the cold-rolled steel products market in the U.S..
This report provides an in-depth analysis of the cold-rolled steel products market in China.
This report provides an in-depth analysis of the cold-rolled steel products market in the EU.
This report provides an in-depth analysis of the global cold-rolled steel products market.
- Cold-Rolled Steel Products Price Singapore
- Cold-rolled Steel Products Market
- Arsenic Market
- Pig Iron Market
- Ferro-silico-manganese Market
- Ferro-molybdenum Market
- Metal Remelting Scrap Ingots Market
- Hot-rolled Steel Products Market
- Flat-rolled Steel Products Market
- Hot-dipped Metal-coated Sheet Market