SADC - Hot-Dipped Metal-Coated Sheet - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSADC: Hot-Dipped Metal-Coated Sheet Market 2024
Hot-Dipped Metal-Coated Sheet Market Size in SADC
The SADC hot-dipped metal-coated sheet market shrank slightly to $X in 2022, with a decrease of X% against the previous year. The market value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. Over the period under review, the market hit record highs at $X in 2018; however, from 2019 to 2022, consumption remained at a lower figure.
Hot-Dipped Metal-Coated Sheet Production in SADC
In value terms, hot-dipped metal-coated sheet production shrank modestly to $X in 2022 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2017 with an increase of X%. Over the period under review, production attained the maximum level at $X in 2018; however, from 2019 to 2022, production stood at a somewhat lower figure.
Hot-Dipped Metal-Coated Sheet Exports
Exports in SADC
In 2022, overseas shipments of hot-dipped metal-coated sheet decreased by X% to X tons for the first time since 2019, thus ending a two-year rising trend. Total exports indicated tangible growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2019 indices. The pace of growth appeared the most rapid in 2014 when exports increased by X% against the previous year. Over the period under review, the exports reached the maximum at X tons in 2021, and then dropped rapidly in the following year.
In value terms, hot-dipped metal-coated sheet exports declined to $X in 2022. In general, exports, however, showed a prominent expansion. The most prominent rate of growth was recorded in 2021 with an increase of X%. As a result, the exports attained the peak of $X, and then dropped in the following year.
Exports by Country
South Africa prevails in exports structure, accounting for X tons, which was near X% of total exports in 2022. It was distantly followed by Tanzania (X tons) and Mozambique (X tons), together mixing up a X% share of total exports.
Exports from South Africa increased at an average annual rate of X% from 2012 to 2022. At the same time, Mozambique (X%) and Tanzania (X%) displayed positive paces of growth. Moreover, Mozambique emerged as the fastest-growing exporter exported in SADC, with a CAGR of X% from 2012-2022. Mozambique (X p.p.) and Tanzania (X p.p.) significantly strengthened its position in terms of the total exports, while South Africa saw its share reduced by X% from 2012 to 2022, respectively.
In value terms, South Africa ($X) remains the largest hot-dipped metal-coated sheet supplier in SADC, comprising X% of total exports. The second position in the ranking was held by Tanzania ($X), with an X% share of total exports.
In South Africa, hot-dipped metal-coated sheet exports increased at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Tanzania (X% per year) and Mozambique (X% per year).
Export Prices by Country
In 2022, the export price in SADC amounted to $X per ton, growing by X% against the previous year. Export price indicated a noticeable expansion from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, hot-dipped metal-coated sheet export price increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 when the export price increased by X%. Over the period under review, the export prices reached the maximum in 2022 and is likely to continue growth in the immediate term.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Tanzania ($X per ton), while Mozambique ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by South Africa (X%), while the other leaders experienced mixed trends in the export price figures.
Hot-Dipped Metal-Coated Sheet Imports
Imports in SADC
In 2022, approx. X tons of hot-dipped metal-coated sheet were imported in SADC; waning by X% against the year before. Total imports indicated notable growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The pace of growth was the most pronounced in 2021 when imports increased by X% against the previous year. As a result, imports reached the peak of X tons, and then contracted markedly in the following year.
In value terms, hot-dipped metal-coated sheet imports declined to $X in 2022. Total imports indicated measured growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The growth pace was the most rapid in 2021 with an increase of X% against the previous year. As a result, imports reached the peak of $X, and then contracted modestly in the following year.
Imports by Country
South Africa represented the largest importing country with an import of about X tons, which amounted to X% of total imports. Tanzania (X tons) took the second position in the ranking, followed by Madagascar (X tons) and Democratic Republic of the Congo (X tons). All these countries together held approx. X% share of total imports. Angola (X tons), Zimbabwe (X tons), Malawi (X tons), Swaziland (X tons), Namibia (X tons), Mauritius (X tons), Mozambique (X tons) and Botswana (X tons) held a little share of total imports.
From 2012 to 2022, average annual rates of growth with regard to hot-dipped metal-coated sheet imports into South Africa stood at X%. At the same time, Tanzania (X%), Swaziland (X%), Botswana (X%), Madagascar (X%), Zimbabwe (X%), Democratic Republic of the Congo (X%) and Mauritius (X%) displayed positive paces of growth. Moreover, Tanzania emerged as the fastest-growing importer imported in SADC, with a CAGR of X% from 2012-2022. By contrast, Namibia (X%), Malawi (X%), Angola (X%) and Mozambique (X%) illustrated a downward trend over the same period. South Africa (X p.p.), Tanzania (X p.p.) and Madagascar (X p.p.) significantly strengthened its position in terms of the total imports, while Malawi, Mozambique and Angola saw its share reduced by X%, X% and X% from 2012 to 2022, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, South Africa ($X) constitutes the largest market for imported hot-dipped metal-coated sheet in SADC, comprising X% of total imports. The second position in the ranking was held by Tanzania ($X), with a X% share of total imports. It was followed by Madagascar, with a X% share.
In South Africa, hot-dipped metal-coated sheet imports expanded at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Tanzania (X% per year) and Madagascar (X% per year).
Import Prices by Country
In 2022, the import price in SADC amounted to $X per ton, surging by X% against the previous year. In general, the import price, however, saw a relatively flat trend pattern. The level of import peaked at $X per ton in 2012; however, from 2013 to 2022, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Mauritius ($X per ton), while Democratic Republic of the Congo ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Tanzania (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in SADC. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24105130 - Hot-dipped metal coated sheet and strip of a width . .600 mm
Country coverage:
- Angola
- Botswana
- Comoros
- Democratic Republic of the Congo
- Lesotho
- Madagascar
- Malawi
- Mauritius
- Mozambique
- Namibia
- Seychelles
- South Africa
- Swaziland
- Tanzania
- Zambia
- Zimbabwe
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in SADC, split by region and country
- Trade (exports and imports) in SADC
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Angola
- Botswana
- Comoros
- Democratic Republic of the Congo
- Lesotho
- Madagascar
- Malawi
- Mauritius
- Mozambique
- Namibia
- Seychelles
- South Africa
- Swaziland
- Tanzania
- Zambia
- Zimbabwe
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in Asia.
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in the U.S..
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in China.
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in the EU.
This report provides an in-depth analysis of the global hot-dipped metal-coated sheet market.