Asia - Hot-Dipped Metal-Coated Sheet - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingAsia: Hot-Dipped Metal-Coated Sheet Market 2024
Hot-Dipped Metal-Coated Sheet Market Size in Asia
The Asian hot-dipped metal-coated sheet market was finally on the rise to reach $X in 2022, after three years of decline. The market value increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. Over the period under review, the market reached the peak level at $X in 2018; however, from 2019 to 2022, consumption stood at a somewhat lower figure.
Hot-Dipped Metal-Coated Sheet Production in Asia
In value terms, hot-dipped metal-coated sheet production fell to $X in 2022 estimated in export price. In general, production, however, enjoyed measured growth. The most prominent rate of growth was recorded in 2017 when the production volume increased by X%. Over the period under review, production reached the peak level at $X in 2019; however, from 2020 to 2022, production remained at a lower figure.
Hot-Dipped Metal-Coated Sheet Exports
Exports in Asia
In 2022, exports of hot-dipped metal-coated sheet in Asia shrank sharply to X tons, waning by X% on 2021. The total export volume increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. As a result, the exports attained the peak of X tons, and then fell significantly in the following year.
In value terms, hot-dipped metal-coated sheet exports dropped dramatically to $X in 2022. Over the period under review, exports, however, saw a notable increase. The growth pace was the most rapid in 2021 when exports increased by X% against the previous year. As a result, the exports attained the peak of $X, and then reduced dramatically in the following year.
Exports by Country
China represented the major exporting country with an export of about X tons, which finished at X% of total exports. It was distantly followed by South Korea (X tons), Turkey (X tons), Vietnam (X tons), Japan (X tons) and Taiwan (Chinese) (X tons), together committing a X% share of total exports. India (X tons) followed a long way behind the leaders.
From 2012 to 2022, average annual rates of growth with regard to hot-dipped metal-coated sheet exports from China stood at X%. At the same time, Turkey (X%), Vietnam (X%) and South Korea (X%) displayed positive paces of growth. Moreover, Turkey emerged as the fastest-growing exporter exported in Asia, with a CAGR of X% from 2012-2022. By contrast, Taiwan (Chinese) (X%), Japan (X%) and India (X%) illustrated a downward trend over the same period. While the share of China (X p.p.), Turkey (X p.p.) and Vietnam (X p.p.) increased significantly in terms of the total exports from 2012-2022, the share of Taiwan (Chinese) (X p.p.), India (X p.p.) and Japan (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, China ($X) remains the largest hot-dipped metal-coated sheet supplier in Asia, comprising X% of total exports. The second position in the ranking was taken by South Korea ($X), with a X% share of total exports. It was followed by Turkey, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value in China amounted to X%. In the other countries, the average annual rates were as follows: South Korea (X% per year) and Turkey (X% per year).
Export Prices by Country
In 2022, the export price in Asia amounted to $X per ton, picking up by X% against the previous year. Export price indicated notable growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, hot-dipped metal-coated sheet export price increased by X% against 2020 indices. The growth pace was the most rapid in 2021 when the export price increased by X% against the previous year. The level of export peaked in 2022 and is likely to see steady growth in years to come.
Average prices varied noticeably amongst the major exporting countries. In 2022, major exporting countries recorded the following prices: in Vietnam ($X per ton) and Japan ($X per ton), while China ($X per ton) and India ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by China (X%), while the other leaders experienced more modest paces of growth.
Hot-Dipped Metal-Coated Sheet Imports
Imports in Asia
In 2022, approx. X tons of hot-dipped metal-coated sheet were imported in Asia; flattening at 2021. The total import volume increased at an average annual rate of X% over the period from 2012 to 2022; the trend pattern remained relatively stable, with only minor fluctuations being observed throughout the analyzed period. The pace of growth was the most pronounced in 2016 with an increase of X% against the previous year. As a result, imports attained the peak of X tons. From 2017 to 2022, the growth of imports remained at a lower figure.
In value terms, hot-dipped metal-coated sheet imports rose notably to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, imports reached the peak figure in 2022 and are expected to retain growth in the near future.
Imports by Country
In 2022, Turkey (X tons) and Thailand (X tons) were the key importers of hot-dipped metal-coated sheet in Asia, together finishing at approx. X% of total imports. China (X tons) held the next position in the ranking, followed by Japan (X tons), the Philippines (X tons), South Korea (X tons), Indonesia (X tons) and Malaysia (X tons). All these countries together took approx. X% share of total imports. India (X tons), the United Arab Emirates (X tons), Israel (X tons), Saudi Arabia (X tons) and Taiwan (Chinese) (X tons) took a relatively small share of total imports.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by the Philippines (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Turkey ($X), Thailand ($X) and China ($X) appeared to be the countries with the highest levels of imports in 2022, together accounting for X% of total imports. Japan, South Korea, the Philippines, India, Malaysia, Indonesia, Israel, the United Arab Emirates, Taiwan (Chinese) and Saudi Arabia lagged somewhat behind, together accounting for a further X%.
The Philippines, with a CAGR of X%, recorded the highest growth rate of the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the import price in Asia amounted to $X per ton, with an increase of X% against the previous year. Import price indicated slight growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, hot-dipped metal-coated sheet import price increased by X% against 2020 indices. The pace of growth was the most pronounced in 2021 when the import price increased by X%. Over the period under review, import prices reached the maximum in 2022 and is expected to retain growth in years to come.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Israel ($X per ton), while the Philippines ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Israel (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24105130 - Hot-dipped metal coated sheet and strip of a width . .600 mm
Country coverage:
- Afghanistan
- Armenia
- Azerbaijan
- Bahrain
- Bangladesh
- Bhutan
- Brunei Darussalam
- Cambodia
- China
- Cyprus
- Democratic People's Republic of Korea
- Georgia
- Hong Kong SAR
- India
- Indonesia
- Iran
- Iraq
- Israel
- Japan
- Jordan
- Kazakhstan
- Kuwait
- Kyrgyzstan
- Lao People's Democratic Republic
- Lebanon
- Macao SAR
- Malaysia
- Maldives
- Mongolia
- Myanmar
- Nepal
- Oman
- Pakistan
- Palestine
- Philippines
- Qatar
- Saudi Arabia
- Singapore
- South Korea
- Sri Lanka
- Syrian Arab Republic
- Taiwan (Chinese)
- Tajikistan
- Thailand
- Timor-Leste
- Turkey
- Turkmenistan
- United Arab Emirates
- Uzbekistan
- Vietnam
- Yemen
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Asia, split by region and country
- Trade (exports and imports) in Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Afghanistan
- Armenia
- Azerbaijan
- Bahrain
- Bangladesh
- Bhutan
- Brunei Darussalam
- Cambodia
- China
- Hong Kong SAR
- Macao SAR
- Cyprus
- Georgia
- India
- Indonesia
- Iran
- Iraq
- Israel
- Japan
- Jordan
- Kazakhstan
- Kuwait
- Kyrgyzstan
- Lebanon
- Malaysia
- Maldives
- Mongolia
- Myanmar
- Nepal
- Oman
- Pakistan
- Palestine
- Philippines
- Qatar
- Saudi Arabia
- Singapore
- South Korea
- Sri Lanka
- Syrian Arab Republic
- Taiwan (Chinese)
- Tajikistan
- Thailand
- Timor-Leste
- Turkey
- Turkmenistan
- United Arab Emirates
- Uzbekistan
- Vietnam
- Yemen
- Lao People's Democratic Republic
- Democratic People's Republic of Korea
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in the U.S..
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in China.
This report provides an in-depth analysis of the hot-dipped metal-coated sheet market in the EU.
This report provides an in-depth analysis of the global hot-dipped metal-coated sheet market.