Ghana - Tubes, Pipes and Hollow Profiles (Of Iron or Steel) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingGhana: Market for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) 2024
Market Size for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Ghana
The Ghanian market for tubes, pipes and hollow profiles (of iron or steel) surged to $X in 2022, with an increase of X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). In general, consumption saw a modest increase. As a result, consumption reached the peak level of $X. From 2016 to 2022, the growth of the market failed to regain momentum.
Exports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Exports from Ghana
In 2022, after two years of growth, there was decline in shipments abroad of tubes, pipes and hollow profiles (of iron or steel), when their volume decreased by X% to X tons. In general, exports, however, showed strong growth. The pace of growth appeared the most rapid in 2020 with an increase of X% against the previous year. Over the period under review, the exports of attained the maximum at X tons in 2021, and then declined modestly in the following year.
In value terms, exports of tubes, pipes and hollow profiles (of iron or steel) shrank significantly to $X in 2022. Overall, total exports indicated a perceptible increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2013 with an increase of X%. The exports peaked at $X in 2021, and then declined markedly in the following year.
Exports by Country
Burkina Faso (X tons) was the main destination for exports of tubes, pipes and hollow profiles (of iron or steel) from Ghana, accounting for a X% share of total exports. Moreover, exports of tubes, pipes and hollow profiles (of iron or steel) to Burkina Faso exceeded the volume sent to the second major destination, Niger (X tons), sevenfold. Togo (X tons) ranked third in terms of total exports with a X% share.
From 2012 to 2022, the average annual growth rate of volume to Burkina Faso amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Niger (X% per year) and Togo (X% per year).
In value terms, Burkina Faso ($X) remains the key foreign market for tubes, pipes and hollow profiles (of iron or steel) exports from Ghana, comprising X% of total exports. The second position in the ranking was held by Niger ($X), with a X% share of total exports. It was followed by Togo, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value to Burkina Faso stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Niger (X% per year) and Togo (X% per year).
Export Prices by Country
The average export price for tubes, pipes and hollow profiles (of iron or steel) stood at $X per ton in 2022, waning by X% against the previous year. Overall, the export price showed a abrupt curtailment. The pace of growth appeared the most rapid in 2013 an increase of X% against the previous year. As a result, the export price reached the peak level of $X per ton. From 2014 to 2022, the average export prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Nigeria ($X per ton), while the average price for exports to Togo ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Nigeria (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Imports into Ghana
Imports of tubes, pipes and hollow profiles (of iron or steel) into Ghana stood at X tons in 2022, remaining constant against 2021. In general, imports saw a measured increase. The growth pace was the most rapid in 2017 when imports increased by X% against the previous year. Over the period under review, imports of attained the maximum at X tons in 2020; however, from 2021 to 2022, imports failed to regain momentum.
In value terms, imports of tubes, pipes and hollow profiles (of iron or steel) surged to $X in 2022. Over the period under review, imports enjoyed a noticeable increase. The most prominent rate of growth was recorded in 2015 when imports increased by X%. As a result, imports reached the peak of $X. From 2016 to 2022, the growth of imports of remained at a lower figure.
Imports by Country
In 2022, China (X tons) constituted the largest supplier of iron or steel pipe and tube to Ghana, accounting for a X% share of total imports. Moreover, imports of tubes, pipes and hollow profiles (of iron or steel) from China exceeded the figures recorded by the second-largest supplier, France (X tons), more than tenfold. Turkey (X tons) ranked third in terms of total imports with a X% share.
From 2012 to 2022, the average annual growth rate of volume from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: France (X% per year) and Turkey (X% per year).
In value terms, China ($X) constituted the largest supplier of tubes, pipes and hollow profiles (of iron or steel) to Ghana, comprising X% of total imports. The second position in the ranking was taken by the UK ($X), with a X% share of total imports. It was followed by France, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: the UK (X% per year) and France (X% per year).
Import Prices by Country
The average import price for tubes, pipes and hollow profiles (of iron or steel) stood at $X per ton in 2022, jumping by X% against the previous year. In general, import price indicated mild growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, import price for tubes, pipes and hollow profiles (of iron or steel) increased by X% against 2020 indices. The growth pace was the most rapid in 2021 an increase of X% against the previous year. The import price peaked in 2022 and is likely to continue growth in years to come.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was the UK ($X per ton), while the price for Turkey ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by China (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Ghana. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24201110 - Line pipe, of a kind used for oil or gas pipelines, seamless, of stainless steel
- Prodcom 24201150 - Line pipe, of a kind used for oil or gas pipelines, seamless, of steel other than stainless steel
- Prodcom 24201210 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of stainless steel
- Prodcom 24201250 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of steel other than stainless steel
- Prodcom 24201310 - Tubes and pipes, of circular cross-section, seamless, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill pipe used for oil or gas drilling)
- Prodcom 24201330 - Precision tubes and pipes, of circular cross-section, colddrawn or cold-rolled, seamless, of steel other than stainless steel
- Prodcom 24201350 - Tubes and pipes, of circular cross-section, cold-drawn or coldrolled, s eamless, of steel other than stainless steel (excluding precision tubes and pipes)
- Prodcom 24201370 - Tubes and pipes, of circular cross-section, hot-finished, s eamless, of steel other than stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill-pipe used for oil or gas drilling)
- Prodcom 24201400 - Tubes and pipes, of non-circular cross-section, seamless, a nd hollow profiles, seamless, of steel
- Prodcom 24202110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202150 - Line pipe, of a kind used for oil or gas pipelines, other than longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202200 - Casing, of a kind used in drilling for oil or gas, welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202300 - Tubes and pipes, welded, of an external diameter > .406,4 mm, of steel (excluding line pipe of a kind used for oil or gas pipelines and casing used for oil or gas drilling)
- Prodcom 24202400 - Tubes and pipes, riveted or similarly closed, of an external diameter > .406,4 mm, of steel (excluding line pipe for oil and gas pipelines, casing used for oil or gas drilling and welded tubes and pipes)
- Prodcom 24203110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203150 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203210 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203250 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203310 - Tubes and pipes, of circular cross-section, welded, of an external diameter . .406,4 mm, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing used for oil or gas drilling)
- Prodcom 24203340 - Precision tubes and pipes, of circular cross-section, welded, o f an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203370 - Tubes and pipes, of circular cross-section, hot- or coldformed and welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203410 - Tubes and pipes, of non-circular cross-section, hot- or coldformed and welded, of stainless steel
- Prodcom 24203430 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness . 2 mm, hotor cold-formed and welded, of steel other than stainless steel
- Prodcom 24203450 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness > 2 mm, hot-or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203470 - Tubes and pipes, of other non-circular cross-section than square or rectangular, hot- or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203500 - Tubes and pipes, open seam, riveted or similarly closed, of steel (excluding line pipe for oil and gas pipelines, casing and tubing used for oil or gas drilling and other welded tubes and pipes)
- Prodcom 24512000 - Tubes, pipes and hollow profiles of cast iron excluding tubes, p ipes, hollow profiles made into identifiable parts of articles, s uch as sections of central heating radiators and machinery parts
Country coverage:
- Ghana
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Ghana
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Asia.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the U.S..
This report provides an in-depth analysis of the market for iron or steel pipe and tube in China.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the EU.
This report provides an in-depth analysis of the global market for iron or steel pipe and tube.