Europe - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in Europe
The Europe rubber-to-metal and moulded article market fell to $X in 2022, which is down by X% against the previous year. In general, consumption, however, continues to indicate a relatively flat trend pattern. Over the period under review, the market reached the maximum level at $X in 2018; however, from 2019 to 2022, consumption failed to regain momentum.
Production of Rubber-to-Metal and Moulded Articles in Europe
In value terms, rubber-to-metal and moulded article production soared to $X in 2022 estimated in export price. In general, production, however, showed a relatively flat trend pattern. Over the period under review, production reached the maximum level at $X in 2013; however, from 2014 to 2022, production remained at a lower figure.
Exports of Rubber-to-Metal and Moulded Articles
Exports in Europe
In 2022, approx. X tons of rubber-to-metal and moulded articles were exported in Europe; approximately reflecting the previous year. The total export volume increased at an average annual rate of X% over the period from 2012 to 2022; the trend pattern remained consistent, with only minor fluctuations being observed throughout the analyzed period. The growth pace was the most rapid in 2021 when exports increased by X% against the previous year. Over the period under review, the exports reached the peak figure at X tons in 2018; however, from 2019 to 2022, the exports remained at a lower figure.
In value terms, rubber-to-metal and moulded article exports shrank slightly to $X in 2022. The total export value increased at an average annual rate of X% over the period from 2012 to 2022; the trend pattern remained relatively stable, with only minor fluctuations being observed throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. As a result, the exports reached the peak of $X, and then reduced slightly in the following year.
Exports by Country
In 2022, Germany (X tons) and Poland (X tons) were the main exporters of rubber-to-metal and moulded articles in Europe, together reaching approx. X% of total exports. It was distantly followed by Italy (X tons), Spain (X tons), the Czech Republic (X tons) and Romania (X tons), together making up a X% share of total exports. France (X tons), Belgium (X tons), Slovakia (X tons), the Netherlands (X tons), Switzerland (X tons), the UK (X tons) and Hungary (X tons) followed a long way behind the leaders.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the leading exporting countries, was attained by the Netherlands (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) remains the largest rubber-to-metal and moulded article supplier in Europe, comprising X% of total exports. The second position in the ranking was taken by Italy ($X), with an X% share of total exports. It was followed by Poland, with a X% share.
In Germany, rubber-to-metal and moulded article exports expanded at an average annual rate of X% over the period from 2012-2022. The remaining exporting countries recorded the following average annual rates of exports growth: Italy (X% per year) and Poland (X% per year).
Export Prices by Country
The export price in Europe stood at $X per ton in 2022, flattening at the previous year. Over the period under review, the export price, however, continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2013 an increase of X%. The level of export peaked at $X per ton in 2014; however, from 2015 to 2022, the export prices stood at a somewhat lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was France ($X per ton), while Poland ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by France (X%), while the other leaders experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports in Europe
In 2022, the amount of rubber-to-metal and moulded articles imported in Europe shrank modestly to X tons, falling by X% against the previous year's figure. The total import volume increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2021 when imports increased by X% against the previous year. As a result, imports reached the peak of X tons, and then dropped in the following year.
In value terms, rubber-to-metal and moulded article imports reduced modestly to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. As a result, imports reached the peak of $X, and then shrank modestly in the following year.
Imports by Country
Germany represented the largest importer of rubber-to-metal and moulded articles in Europe, with the volume of imports resulting at X tons, which was near X% of total imports in 2022. It was distantly followed by France (X tons), Italy (X tons), Belgium (X tons), the UK (X tons), the Czech Republic (X tons), Poland (X tons) and Spain (X tons), together comprising a X% share of total imports. The following importers - the Netherlands (X tons), Russia (X tons), Hungary (X tons), Austria (X tons) and Romania (X tons) - together made up X% of total imports.
Imports into Germany increased at an average annual rate of X% from 2012 to 2022. At the same time, Hungary (X%), Belgium (X%), Italy (X%), Romania (X%), the Netherlands (X%), Poland (X%), Russia (X%), the Czech Republic (X%), Austria (X%) and France (X%) displayed positive paces of growth. Moreover, Hungary emerged as the fastest-growing importer imported in Europe, with a CAGR of X% from 2012-2022. The UK experienced a relatively flat trend pattern. By contrast, Spain (X%) illustrated a downward trend over the same period. Belgium (X p.p.) and Italy (X p.p.) significantly strengthened its position in terms of the total imports, while France, Germany, the UK and Spain saw its share reduced by X%, X%, X% and X% from 2012 to 2022, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Germany ($X) constitutes the largest market for imported rubber-to-metal and moulded articles in Europe, comprising X% of total imports. The second position in the ranking was taken by Italy ($X), with a X% share of total imports. It was followed by France, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value in Germany stood at X%. The remaining importing countries recorded the following average annual rates of imports growth: Italy (X% per year) and France (X% per year).
Import Prices by Country
In 2022, the import price in Europe amounted to $X per ton, dropping by X% against the previous year. Overall, the import price recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 an increase of X% against the previous year. Over the period under review, import prices attained the peak figure at $X per ton in 2013; however, from 2014 to 2022, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Austria ($X per ton), while Belgium ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Spain (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- North Macedonia
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.