Slovakia - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSlovakia: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in Slovakia
The Slovak rubber-to-metal and moulded article market dropped slightly to $X in 2022, remaining relatively unchanged against the previous year. Over the period under review, consumption showed resilient growth. Over the period under review, the market hit record highs at $X in 2021, and then shrank slightly in the following year.
Production of Rubber-to-Metal and Moulded Articles in Slovakia
In value terms, rubber-to-metal and moulded article production reached $X in 2022 estimated in export price. Over the period under review, production showed a pronounced shrinkage. The pace of growth was the most pronounced in 2014 when the production volume increased by X% against the previous year. Over the period under review, production reached the maximum level at $X in 2018; however, from 2019 to 2022, production stood at a somewhat lower figure.
Exports of Rubber-to-Metal and Moulded Articles
Exports from Slovakia
In 2022, rubber-to-metal and moulded article exports from Slovakia declined to X tons, reducing by X% against the previous year's figure. Overall, exports saw a mild downturn. The growth pace was the most rapid in 2017 when exports increased by X% against the previous year. The exports peaked at X tons in 2013; however, from 2014 to 2022, the exports remained at a lower figure.
In value terms, rubber-to-metal and moulded article exports declined remarkably to $X in 2022. In general, exports, however, continue to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 with an increase of X%. The exports peaked at $X in 2014; however, from 2015 to 2022, the exports remained at a lower figure.
Exports by Country
Germany (X tons) was the main destination for rubber-to-metal and moulded article exports from Slovakia, with a X% share of total exports. Moreover, rubber-to-metal and moulded article exports to Germany exceeded the volume sent to the second major destination, Spain (X tons), fivefold. The third position in this ranking was held by Poland (X tons), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume to Germany totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Spain (X% per year) and Poland (X% per year).
In value terms, Germany ($X) remains the key foreign market for rubber-to-metal and moulded articles exports from Slovakia, comprising X% of total exports. The second position in the ranking was taken by Spain ($X), with a X% share of total exports. It was followed by Poland, with a X% share.
From 2012 to 2022, the average annual growth rate of value to Germany stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Spain (X% per year) and Poland (X% per year).
Export Prices by Country
In 2022, the average rubber-to-metal and moulded article export price amounted to $X per ton, declining by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The growth pace was the most rapid in 2014 when the average export price increased by X%. As a result, the export price attained the peak level of $X per ton. From 2015 to 2022, the average export prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Hungary ($X per ton), while the average price for exports to Portugal ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to the Czech Republic (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports into Slovakia
In 2022, the amount of rubber-to-metal and moulded articles imported into Slovakia rose notably to X tons, with an increase of X% compared with 2021. The total import volume increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2016 when imports increased by X% against the previous year. Over the period under review, imports reached the peak figure at X tons in 2017; however, from 2018 to 2022, imports stood at a somewhat lower figure.
In value terms, rubber-to-metal and moulded article imports fell to $X in 2022. Over the period under review, total imports indicated a pronounced expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The pace of growth appeared the most rapid in 2021 when imports increased by X%. As a result, imports reached the peak of $X, and then declined modestly in the following year.
Imports by Country
Germany (X tons), South Korea (X tons) and the Czech Republic (X tons) were the main suppliers of rubber-to-metal and moulded article imports to Slovakia, with a combined X% share of total imports. Poland, Italy, France and China lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by China (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest rubber-to-metal and moulded article suppliers to Slovakia were Germany ($X), South Korea ($X) and the Czech Republic ($X), together accounting for X% of total imports. Poland, Italy, France and China lagged somewhat behind, together comprising a further X%.
In terms of the main suppliers, France, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average rubber-to-metal and moulded article import price stood at $X per ton in 2022, waning by X% against the previous year. Overall, the import price, however, showed a relatively flat trend pattern. The growth pace was the most rapid in 2018 when the average import price increased by X% against the previous year. Over the period under review, average import prices attained the peak figure at $X per ton in 2021, and then declined in the following year.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Poland ($X per ton), while the price for Italy ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by France (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Slovakia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Slovakia
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Slovakia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.
- Price for Rubber-To-Metal and Moulded Article Slovakia
- Rubber-to-metal and Moulded Article Market
- Reclaimed Rubber Market
- Unvulcanised Rubber Market
- Vulcanised Rubber Thread Market
- Extruded Rod Market
- Solid Vulcanised Rubber Sheet Market
- Extruded Solid Rubber Rod Market
- Non-reinforced Rubber Tubing Market
- Metal-reinforced Rubber Hose Market