Europe - Mechanical Appliances for Projecting, Dispersing or Spraying - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Market for Mechanical Appliances For Projecting, Dispersing Or Spraying 2024
Market Size for Mechanical Appliances For Projecting, Dispersing Or Spraying in Europe
The Europe market for mechanical appliances for projecting, dispersing or spraying rose remarkably to $X in 2022, picking up by X% against the previous year. Over the period under review, consumption saw a strong increase. The level of consumption peaked in 2022 and is likely to continue growth in the immediate term.
Production of Mechanical Appliances For Projecting, Dispersing Or Spraying in Europe
In value terms, production of mechanical appliances for projecting, dispersing or spraying reduced to $X in 2022 estimated in export price. Overall, production continues to indicate a slight contraction. The growth pace was the most rapid in 2014 when the production volume increased by X% against the previous year. Over the period under review, production of reached the maximum level at $X in 2015; however, from 2016 to 2022, production stood at a somewhat lower figure.
Exports of Mechanical Appliances For Projecting, Dispersing Or Spraying
Exports in Europe
In 2022, approx. X units of mechanical appliances for projecting, dispersing or spraying were exported in Europe; shrinking by X% against the year before. In general, exports showed a relatively flat trend pattern. The pace of growth appeared the most rapid in 2020 with an increase of X% against the previous year. As a result, the exports attained the peak of X units. From 2021 to 2022, the growth of the exports of remained at a lower figure.
In value terms, exports of mechanical appliances for projecting, dispersing or spraying stood at $X in 2022. The total export value increased at an average annual rate of X% over the period from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2017 with an increase of X% against the previous year. The level of export peaked in 2022 and is likely to continue growth in the near future.
Exports by Country
Switzerland was the largest exporter of mechanical appliances for projecting, dispersing or spraying in Europe, with the volume of exports recording X units, which was near X% of total exports in 2022. Germany (X units) ranks second in terms of the total exports with a X% share, followed by Luxembourg (X%) and Italy (X%). France (X units), Poland (X units) and Belarus (X units) followed a long way behind the leaders.
From 2012 to 2022, average annual rates of growth with regard to mechanical appliances for projecting, dispersing or spraying exports from Switzerland stood at X%. At the same time, Luxembourg (X%), Belarus (X%), Poland (X%) and France (X%) displayed positive paces of growth. Moreover, Luxembourg emerged as the fastest-growing exporter exported in Europe, with a CAGR of X% from 2012-2022. Italy experienced a relatively flat trend pattern. By contrast, Germany (X%) illustrated a downward trend over the same period. While the share of Luxembourg (X p.p.), Poland (X p.p.) and Belarus (X p.p.) increased significantly in terms of the total exports from 2012-2022, the share of Germany (X p.p.) and Switzerland (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Germany ($X) remains the largest mechanical appliances for projecting, dispersing or spraying supplier in Europe, comprising X% of total exports. The second position in the ranking was taken by Italy ($X), with a X% share of total exports. It was followed by Switzerland, with a X% share.
In Germany, exports of mechanical appliances for projecting, dispersing or spraying expanded at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Italy (X% per year) and Switzerland (X% per year).
Export Prices by Country
The export price in Europe stood at $X per unit in 2022, picking up by X% against the previous year. Export price indicated measured growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, export price for mechanical appliances for projecting, dispersing or spraying increased by X% against 2020 indices. The pace of growth was the most pronounced in 2021 when the export price increased by X%. Over the period under review, the export prices hit record highs in 2022 and is likely to see steady growth in the immediate term.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Germany ($X per unit), while Belarus ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Germany (X%), while the other leaders experienced more modest paces of growth.
Imports of Mechanical Appliances For Projecting, Dispersing Or Spraying
Imports in Europe
In 2022, the amount of mechanical appliances for projecting, dispersing or spraying imported in Europe surged to X units, jumping by X% against the previous year's figure. Over the period under review, imports recorded a significant increase. The most prominent rate of growth was recorded in 2020 with an increase of X% against the previous year. The volume of import peaked in 2022 and is expected to retain growth in the immediate term.
In value terms, imports of mechanical appliances for projecting, dispersing or spraying contracted to $X in 2022. Total imports indicated a moderate expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2016 indices. The pace of growth was the most pronounced in 2018 when imports increased by X%. The level of import peaked at $X in 2021, and then contracted in the following year.
Imports by Country
In 2022, France (X units), Austria (X units), Poland (X units), Germany (X units), the Netherlands (X units), Russia (X units) and the Czech Republic (X units) represented the major importer of mechanical appliances for projecting, dispersing or spraying in Europe, constituting X% of total import. Spain (X units), Italy (X units), Portugal (X units), Hungary (X units), Finland (X units) and Greece (X units) took a little share of total imports.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by Greece (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) constitutes the largest market for imported mechanical appliances for projecting, dispersing or spraying in Europe, comprising X% of total imports. The second position in the ranking was held by France ($X), with an X% share of total imports. It was followed by Russia, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value in Germany totaled X%. In the other countries, the average annual rates were as follows: France (X% per year) and Russia (X% per year).
Import Prices by Country
In 2022, the import price in Europe amounted to $X per unit, declining by X% against the previous year. In general, the import price showed a sharp slump. The most prominent rate of growth was recorded in 2015 an increase of X% against the previous year. As a result, import price attained the peak level of $X per unit. From 2016 to 2022, the import prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Italy ($X per unit), while Greece ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Poland (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28292240 - Other mechanical appliances for projecting, dispersing or spraying
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- North Macedonia
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in Asia.
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in the U.S..
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in China.
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in the EU.
This report provides an in-depth analysis of the global market for mechanical appliances for projecting, dispersing or spraying.