Overview of the Global Market for Mechanical Appliances For Projecting, Dispersing Or Spraying

Market Size for Mechanical Appliances For Projecting, Dispersing Or Spraying

In 2019, the global market for mechanical appliances for projecting, dispersing or spraying decreased by -X% to $X, falling for the third year in a row after seven years of growth. Overall, consumption continues to indicate a slight expansion. The most prominent rate of growth was recorded in 2011 with an increase of X% y-o-y. Over the period under review, the global market attained the peak level at $X in 2016; however, from 2017 to 2019, consumption remained at a lower figure.

Production of Mechanical Appliances For Projecting, Dispersing Or Spraying

In value terms, production of mechanical appliances for projecting, dispersing or spraying contracted slightly to $X in 2019 estimated in export prices. In general, production, however, saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 when the production volume increased by X% year-to-year. As a result, production reached the peak level of $X. From 2018 to 2019, global production growth remained at a somewhat lower figure.

Production By Country

China (X units) remains the largest mechanical appliances for projecting, dispersing or spraying producing country worldwide, comprising approx. X% of total volume. Moreover, production of mechanical appliances for projecting, dispersing or spraying in China exceeded the figures recorded by the second-largest producer, India (X units), sixfold. The third position in this ranking was occupied by Spain (X units), with a X% share.

In China, production of mechanical appliances for projecting, dispersing or spraying expanded at an average annual rate of +X% over the period from 2007-2019. In the other countries, the average annual rates were as follows: India (+X% per year) and Spain (+X% per year).

Exports of Mechanical Appliances For Projecting, Dispersing Or Spraying

Exports

In 2019, approx. X units of mechanical appliances for projecting, dispersing or spraying were exported worldwide; with a decrease of -X% compared with 2018. Overall, exports, however, showed a strong expansion. The most prominent rate of growth was recorded in 2011 with an increase of X% against the previous year. Global exports peaked at X units in 2016; however, from 2017 to 2019, exports stood at a somewhat lower figure.

In value terms, exports of mechanical appliances for projecting, dispersing or spraying contracted modestly to $X in 2019. Over the period under review, total exports indicated resilient growth from 2007 to 2019: its value increased at an average annual rate of +X% over the last twelve-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2019 figures, exports increased by +X% against 2009 indices. The growth pace was the most rapid in 2011 with an increase of X% y-o-y. Global exports peaked at $X in 2018, and then contracted modestly in the following year.

Exports by Country

In 2019, China (X units) represented the main exporter of mechanical appliances for projecting, dispersing or spraying, mixing up X% of total exports. Mexico (X units) held the second position in the ranking, followed by China, Hong Kong SAR (X units), Switzerland (X units), Italy (X units) and Germany (X units). All these countries together occupied near X% share of total exports. Spain (X units) occupied a little share of total exports.

From 2007 to 2019, average annual rates of growth with regard to mechanical appliances for projecting, dispersing or spraying exports from China stood at +X%. At the same time, China, Hong Kong SAR (+X%), Spain (+X%), Mexico (+X%) and Italy (+X%) displayed positive paces of growth. Moreover, China, Hong Kong SAR emerged as the fastest-growing exporter exported in the world, with a CAGR of +X% from 2007-2019. Switzerland experienced a relatively flat trend pattern. By contrast, Germany (-X%) illustrated a downward trend over the same period. While the share of China (+X p.p.), Mexico (+X p.p.), China, Hong Kong SAR (+X p.p.) and Spain (+X p.p.) increased significantly, the shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest mechanical appliances for projecting, dispersing or spraying supplying countries worldwide were Germany ($X), China ($X) and Italy ($X), together comprising X% of global exports. China, Hong Kong SAR, Switzerland, Mexico and Spain lagged somewhat behind, together accounting for a further X the main exporting countries, China, Hong Kong SAR recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other global leaders experienced more modest paces of growth.

Export Prices by Country

In 2019, the average export price for mechanical appliances for projecting, dispersing or spraying amounted to $X per unit, rising by X% against the previous year. Overall, the export price, however, showed a noticeable curtailment. The pace of growth was the most pronounced in 2017 when the average export price increased by X% against the previous year. Over the period under review, average export prices attained the peak figure at $X per unit in 2008; however, from 2009 to 2019, export prices stood at a somewhat lower figure.

There were significant differences in the average prices amongst the major exporting countries. In 2019, the country with the highest price was Germany ($X per unit), while Mexico ($X per unit) was amongst the lowest.

From 2007 to 2019, the most notable rate of growth in terms of prices was attained by Germany, while the other global leaders experienced mixed trends in the export price figures.

Imports of Mechanical Appliances For Projecting, Dispersing Or Spraying

Imports

In 2019, approx. X units of mechanical appliances for projecting, dispersing or spraying were imported worldwide; growing by X% against the year before. In general, imports saw a significant expansion. As a result, imports attained the peak and are likely to continue growth in the immediate term.

In value terms, imports of mechanical appliances for projecting, dispersing or spraying amounted to $X in 2019. Over the period under review, total imports indicated a resilient expansion from 2007 to 2019: its value increased at an average annual rate of +X% over the last twelve-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2019 figures, imports increased by +X% against 2016 indices. The pace of growth was the most pronounced in 2011 when imports increased by X% y-o-y. Global imports peaked in 2019 and are expected to retain growth in the immediate term.

Imports by Country

South Africa dominates imports of mechanical appliances for projecting, dispersing or spraying structure, resulting at X units, which was near X% of total imports in 2019. The U.S. (X units) and Russia (X units) held a minor share of total imports.

South Africa was also the fastest-growing in terms of the mechanical appliances for projecting, dispersing or spraying imports, with a CAGR of +X% from 2007 to 2019. At the same time, Russia (+X%) and the U.S. (+X%) displayed positive paces of growth. While the share of South Africa (+X p.p.), Russia (+X p.p.) and the U.S. (+X p.p.) increased significantly, the shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the U.S. ($X) constitutes the largest market for imported mechanical appliances for projecting, dispersing or spraying worldwide, comprising X% of global imports. The second position in the ranking was occupied by Russia ($X), with a X% share of global imports.

In the U.S., imports of mechanical appliances for projecting, dispersing or spraying expanded at an average annual rate of +X% over the period from 2007-2019. In the other countries, the average annual rates were as follows: Russia (+X% per year) and South Africa (+X% per year).

Import Prices by Country

In 2019, the average import price for mechanical appliances for projecting, dispersing or spraying amounted to $X per unit, with a decrease of -X% against the previous year. In general, the import price showed a abrupt slump. The most prominent rate of growth was recorded in 2017 when the average import price increased by X% against the previous year. Global import price peaked at $X per unit in 2008; however, from 2009 to 2019, import prices stood at a somewhat lower figure.

There were significant differences in the average prices amongst the major importing countries. In 2019, the country with the highest price was the U.S. ($X per unit), while South Africa ($X per unit) was amongst the lowest.

From 2007 to 2019, the most notable rate of growth in terms of prices was attained by the U.S., while the other global leaders experienced a decline in the import price figures.

Source: IndexBox AI Platform

Frequently Asked Questions (FAQ) :

What are the largest markets for mechanical appliances for projecting, dispersing or spraying in the world?

+

South Africa (21B units) remains the largest mechanical appliances for projecting, dispersing or spraying consuming country worldwide, comprising approx. 80% of total volume. Moreover, consumption of mechanical appliances for projecting, dispersing or spraying in South Africa exceeded the figures recorded by the second-largest consumer, the U.S. (994M units), more than tenfold. Russia (827M units) ranked third in terms of total consumption with a 3.1% share.

What are the largest producers of mechanical appliances for projecting, dispersing or spraying in the world?

+

China (1.8B units) constituted the country with the largest volume of production of mechanical appliances for projecting, dispersing or spraying, comprising approx. 45% of total volume. Moreover, production of mechanical appliances for projecting, dispersing or spraying in China exceeded the figures recorded by the second-largest producer, India (296M units), sixfold. The third position in this ranking was occupied by Spain (289M units), with a 7% share.

What are the leading exporters of mechanical appliances for projecting, dispersing or spraying in the world?

+

In value terms, the largest mechanical appliances for projecting, dispersing or spraying supplying countries worldwide were Germany ($1.2B), China ($1.2B) and Italy ($338M), together accounting for 52% of global exports. These countries were followed by China, Hong Kong SAR, Switzerland, Mexico and Spain, which together accounted for a further 9.6%.

What are the leading importers of mechanical appliances for projecting, dispersing or spraying in the world?

+

In value terms, the U.S. ($620M) constitutes the largest market for imported mechanical appliances for projecting, dispersing or spraying worldwide, comprising 11% of global imports. The second position in the ranking was occupied by Russia ($248M), with a 4.3% share of global imports.

What is the average export price for mechanical appliances for projecting, dispersing or spraying in the world?

+

The average export price for mechanical appliances for projecting, dispersing or spraying stood at $2.6 per unit in 2019, increasing by 13% against the previous year.

What is the average import price for mechanical appliances for projecting, dispersing or spraying in the world?

+

The average import price for mechanical appliances for projecting, dispersing or spraying stood at $0.2 per unit in 2019, reducing by -86.8% against the previous year.