Europe - Cooling Towers, Vacuum-Vapour Plants, and Other Machinery for Material Treatment by Heating or Cooling Process - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Market for Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process 2024
Market Size for Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process in Europe
In 2022, the Europe market for cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process decreased by X% to $X for the first time since 2019, thus ending a two-year rising trend. Overall, consumption, however, saw a relatively flat trend pattern. The level of consumption peaked at $X in 2021, and then shrank rapidly in the following year.
Production of Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process in Europe
In value terms, production of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process skyrocketed to $X in 2022 estimated in export price. In general, production saw a abrupt decrease. Over the period under review, production of hit record highs at $X in 2012; however, from 2013 to 2022, production remained at a lower figure.
Exports of Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process
Exports in Europe
After two years of growth, shipments abroad of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process decreased by X% to X units in 2022. Total exports indicated a measured expansion from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2017 when exports increased by X% against the previous year. Over the period under review, the exports of hit record highs at X units in 2021, and then reduced in the following year.
In value terms, exports of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process dropped rapidly to $X in 2022. The total export value increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth was the most pronounced in 2017 when exports increased by X% against the previous year. The level of export peaked at $X in 2021, and then reduced notably in the following year.
Exports by Country
In 2022, Germany (X units), distantly followed by Italy (X units), Switzerland (X units) and Belgium (X units) represented the key exporters of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process, together mixing up X% of total exports. The UK (X units), the Netherlands (X units), France (X units), Denmark (X units), Poland (X units), Spain (X units), Austria (X units) and Sweden (X units) took a relatively small share of total exports.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the leading exporting countries, was attained by Denmark (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) remains the largest machinery for material treatment by heating or cooling process supplier in Europe, comprising X% of total exports. The second position in the ranking was held by Italy ($X), with a X% share of total exports. It was followed by the Netherlands, with an X% share.
In Germany, exports of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process expanded at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Italy (X% per year) and the Netherlands (X% per year).
Export Prices by Country
The export price in Europe stood at $X per unit in 2022, shrinking by X% against the previous year. In general, the export price continues to indicate a noticeable setback. The pace of growth appeared the most rapid in 2021 an increase of X% against the previous year. Over the period under review, the export prices attained the peak figure at $X per unit in 2012; however, from 2013 to 2022, the export prices remained at a lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was the Netherlands ($X per unit), while Switzerland ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Sweden (X%), while the other leaders experienced more modest paces of growth.
Imports of Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process
Imports in Europe
In 2022, purchases abroad of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process decreased by X% to X units for the first time since 2019, thus ending a two-year rising trend. In general, imports, however, continue to indicate prominent growth. The pace of growth was the most pronounced in 2017 when imports increased by X%. Over the period under review, imports of attained the maximum at X units in 2021, and then plummeted in the following year.
In value terms, imports of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process dropped to $X in 2022. Total imports indicated perceptible growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2019 indices. The growth pace was the most rapid in 2017 when imports increased by X% against the previous year. The level of import peaked at $X in 2021, and then contracted in the following year.
Imports by Country
Russia represented the main importer of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process in Europe, with the volume of imports finishing at X units, which was approx. X% of total imports in 2022. Switzerland (X units) ranks second in terms of the total imports with a X% share, followed by Germany (X%), the UK (X%) and Norway (X%). France (X units), Belgium (X units), Poland (X units), the Netherlands (X units), Austria (X units), Belarus (X units), Spain (X units) and Italy (X units) followed a long way behind the leaders.
Russia was also the fastest-growing in terms of the cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process imports, with a CAGR of X% from 2012 to 2022. At the same time, the UK (X%), Norway (X%), Belarus (X%), Switzerland (X%), Germany (X%), Austria (X%), Spain (X%), Italy (X%), France (X%), Belgium (X%) and the Netherlands (X%) displayed positive paces of growth. Poland experienced a relatively flat trend pattern. Russia (X p.p.), Poland (X p.p.) and the UK (X p.p.) significantly strengthened its position in terms of the total imports, while the Netherlands, France, Belgium and Germany saw its share reduced by X%, X%, X% and X% from 2012 to 2022, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Germany ($X) constitutes the largest market for imported cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process in Europe, comprising X% of total imports. The second position in the ranking was held by France ($X), with an X% share of total imports. It was followed by the Netherlands, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value in Germany stood at X%. The remaining importing countries recorded the following average annual rates of imports growth: France (X% per year) and the Netherlands (X% per year).
Import Prices by Country
The import price in Europe stood at $X per unit in 2022, increasing by X% against the previous year. Overall, the import price, however, recorded a drastic downturn. The level of import peaked at $X per unit in 2012; however, from 2013 to 2022, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was the Netherlands ($X per unit), while Russia ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28296030 - Cooling towers and similar plant for direct cooling by means of recirculated water
- Prodcom 28296050 - Vacuum-vapour plant for the deposition of metal
- Prodcom 28296090 - Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, n.e.c.
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- North Macedonia
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in Asia.
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in the U.S..
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in China.
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in the EU.
This report provides an in-depth analysis of the global market for machinery for material treatment by heating or cooling process.
- Machinery for Material Treatment by Heating or Cooling Process Market
- Window Market
- Air Conditioning Machine Market
- Motor Vehicle Air Conditioning Machine Market
- Refrigerator or Freezer Market
- Heat Exchange Unit Market
- Air Liquefyer Market
- Calendering Machine Market
- Calendering Cylinder Market
- Water Filter Market