EU - Cooling Towers, Vacuum-Vapour Plants, and Other Machinery for Material Treatment by Heating or Cooling Process - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEU: Market for Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process 2024
Market Size for Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process in the EU
In 2022, the EU market for cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process increased by X% to $X, rising for the third year in a row after two years of decline. Overall, consumption posted a resilient expansion. Over the period under review, the market reached the maximum level in 2022 and is likely to see gradual growth in the immediate term.
Production of Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process in the EU
In value terms, production of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process skyrocketed to $X in 2022 estimated in export price. Over the period under review, production continues to indicate a mild slump. The level of production peaked at $X in 2018; however, from 2019 to 2022, production remained at a lower figure.
Need a Better Market Strategy?
Find out how to improve your business.
Book a free 30-minute chat with our expert.
Exports of Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process
Exports in the EU
In 2022, shipments abroad of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process decreased by X% to X units for the first time since 2019, thus ending a two-year rising trend. Total exports indicated a temperate increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2017 when exports increased by X%. The volume of export peaked at X units in 2021, and then declined in the following year.
In value terms, exports of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process reduced rapidly to $X in 2022. The total export value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth was the most pronounced in 2017 with an increase of X% against the previous year. The level of export peaked at $X in 2021, and then dropped remarkably in the following year.
Exports by Country
In 2022, Germany (X units), distantly followed by Italy (X units), Belgium (X units), the Netherlands (X units) and France (X units) were the largest exporters of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process, together creating X% of total exports. Denmark (X units), Poland (X units), Spain (X units), Austria (X units), Sweden (X units) and Romania (X units) took a minor share of total exports.
From 2012 to 2022, the biggest increases were recorded for Denmark (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) remains the largest machinery for material treatment by heating or cooling process supplier in the European Union, comprising X% of total exports. The second position in the ranking was taken by Italy ($X), with a X% share of total exports. It was followed by the Netherlands, with a X% share.
In Germany, exports of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process expanded at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Italy (X% per year) and the Netherlands (X% per year).
Export Prices by Country
In 2022, the export price in the European Union amounted to $X per unit, falling by X% against the previous year. Over the period under review, the export price saw a pronounced curtailment. The most prominent rate of growth was recorded in 2021 an increase of X% against the previous year. Over the period under review, the export prices hit record highs at $X per unit in 2012; however, from 2013 to 2022, the export prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was the Netherlands ($X per unit), while Romania ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Sweden (X%), while the other leaders experienced more modest paces of growth.
Imports of Cooling Towers, Vacuum-Vapour Plants, And Other Machinery for Material Treatment by Heating or Cooling Process
Imports in the EU
In 2022, supplies from abroad of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process increased by X% to X units, rising for the second year in a row after two years of decline. Overall, imports posted a buoyant expansion. The pace of growth appeared the most rapid in 2018 when imports increased by X% against the previous year. As a result, imports reached the peak of X units. From 2019 to 2022, the growth of imports of remained at a lower figure.
In value terms, imports of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process amounted to $X in 2022. Total imports indicated a buoyant increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2015 indices. The most prominent rate of growth was recorded in 2018 when imports increased by X% against the previous year. Over the period under review, imports of attained the maximum in 2022 and are expected to retain growth in the immediate term.
Imports by Country
Germany was the major importer of cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process in the European Union, with the volume of imports reaching X units, which was near X% of total imports in 2022. France (X units) held an X% share (based on physical terms) of total imports, which put it in second place, followed by Belgium (X%), Poland (X%), the Netherlands (X%), Austria (X%) and Spain (X%). The following importers - Italy (X units), Denmark (X units), Sweden (X units), the Czech Republic (X units), Hungary (X units) and Romania (X units) - together made up X% of total imports.
Imports into Germany increased at an average annual rate of X% from 2012 to 2022. At the same time, the Czech Republic (X%), Austria (X%), Spain (X%), Italy (X%), France (X%), Belgium (X%), the Netherlands (X%) and Romania (X%) displayed positive paces of growth. Moreover, the Czech Republic emerged as the fastest-growing importer imported in the European Union, with a CAGR of X% from 2012-2022. Hungary, Sweden and Poland experienced a relatively flat trend pattern. By contrast, Denmark (X%) illustrated a downward trend over the same period. While the share of Poland (X p.p.), Denmark (X p.p.), Sweden (X p.p.), the Czech Republic (X p.p.) and Romania (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of Hungary (X p.p.), France (X p.p.), the Netherlands (X p.p.) and Belgium (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Germany ($X) constitutes the largest market for imported cooling towers, vacuum-vapour plants, and other machinery for material treatment by heating or cooling process in the European Union, comprising X% of total imports. The second position in the ranking was held by France ($X), with an X% share of total imports. It was followed by the Netherlands, with a X% share.
From 2012 to 2022, the average annual growth rate of value in Germany amounted to X%. In the other countries, the average annual rates were as follows: France (X% per year) and the Netherlands (X% per year).
Import Prices by Country
In 2022, the import price in the European Union amounted to $X per unit, therefore, remained relatively stable against the previous year. In general, the import price, however, showed a slight setback. The pace of growth appeared the most rapid in 2015 when the import price increased by X% against the previous year. As a result, import price attained the peak level of $X per unit. From 2016 to 2022, the import prices failed to regain momentum.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was the Netherlands ($X per unit), while Romania ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Denmark (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28296030 - Cooling towers and similar plant for direct cooling by means of recirculated water
- Prodcom 28296050 - Vacuum-vapour plant for the deposition of metal
- Prodcom 28296090 - Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, n.e.c.
Country coverage:
- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in the EU, split by region and country
- Trade (exports and imports) in the EU
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in Asia.
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in the U.S..
This report provides an in-depth analysis of the market for machinery for material treatment by heating or cooling process in China.
This report provides an in-depth analysis of the global market for machinery for material treatment by heating or cooling process.