Benelux - Tubes, Pipes and Hollow Profiles (Of Iron or Steel) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingBenelux: Market for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) 2024
Market Size for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Benelux
The Benelux market for tubes, pipes and hollow profiles (of iron or steel) skyrocketed to $X in 2022, surging by X% against the previous year. Over the period under review, consumption, however, showed a relatively flat trend pattern. Over the period under review, the market reached the maximum level at $X in 2020; however, from 2021 to 2022, consumption failed to regain momentum.
Production of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Benelux
In value terms, production of tubes, pipes and hollow profiles (of iron or steel) amounted to $X in 2022 estimated in export price. Over the period under review, production, however, recorded a noticeable slump. The most prominent rate of growth was recorded in 2019 when the production volume increased by X% against the previous year. The level of production peaked at $X in 2016; however, from 2017 to 2022, production remained at a lower figure.
Exports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Exports in Benelux
In 2022, shipments abroad of tubes, pipes and hollow profiles (of iron or steel) decreased by X% to X tons for the first time since 2019, thus ending a two-year rising trend. Over the period under review, exports continue to indicate a mild decrease. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, the exports of reached the peak figure at X tons in 2013; however, from 2014 to 2022, the exports stood at a somewhat lower figure.
In value terms, exports of tubes, pipes and hollow profiles (of iron or steel) rose significantly to $X in 2022. In general, exports recorded a relatively flat trend pattern. The growth pace was the most rapid in 2021 when exports increased by X%. Over the period under review, the exports of reached the maximum at $X in 2013; however, from 2014 to 2022, the exports remained at a lower figure.
Exports by Country
The Netherlands (X tons) and Belgium (X tons) represented roughly X% of total exports in 2022.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main exporting countries, was attained by Belgium (with a CAGR of X%).
In value terms, the largest iron or steel pipe and tube supplying countries in Benelux were the Netherlands ($X) and Belgium ($X).
Belgium, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, in terms of the main exporting countries over the period under review.
Export Prices by Country
In 2022, the export price in Benelux amounted to $X per ton, increasing by X% against the previous year. Overall, the export price showed a relatively flat trend pattern. The pace of growth appeared the most rapid in 2013 when the export price increased by X%. As a result, the export price reached the peak level of $X per ton. From 2014 to 2022, the export prices remained at a lower figure.
Average prices varied noticeably amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was the Netherlands ($X per ton), while Belgium totaled $X per ton.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Belgium (X%).
Imports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Imports in Benelux
In 2022, after two years of growth, there was significant decline in purchases abroad of tubes, pipes and hollow profiles (of iron or steel), when their volume decreased by X% to X tons. Over the period under review, imports recorded a mild decline. The most prominent rate of growth was recorded in 2016 when imports increased by X% against the previous year. The volume of import peaked at X tons in 2013; however, from 2014 to 2022, imports stood at a somewhat lower figure.
In value terms, imports of tubes, pipes and hollow profiles (of iron or steel) rose markedly to $X in 2022. Overall, imports, however, saw a relatively flat trend pattern. The growth pace was the most rapid in 2021 with an increase of X%. The level of import peaked at $X in 2013; however, from 2014 to 2022, imports failed to regain momentum.
Imports by Country
The purchases of the two major importers of tubes, pipes and hollow profiles (of iron or steel), namely the Netherlands and Belgium, represented more than two-thirds of total import.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the key importing countries, was attained by Belgium (with a CAGR of X%).
In value terms, the Netherlands ($X) and Belgium ($X) appeared to be the countries with the highest levels of imports in 2022.
Among the main importing countries, Belgium, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, over the period under review.
Import Prices by Country
In 2022, the import price in Benelux amounted to $X per ton, surging by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The pace of growth appeared the most rapid in 2021 when the import price increased by X%. Over the period under review, import prices reached the maximum in 2022 and is expected to retain growth in years to come.
Average prices varied noticeably amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was the Netherlands ($X per ton), while Belgium totaled $X per ton.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Netherlands (X%).
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Benelux. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24201110 - Line pipe, of a kind used for oil or gas pipelines, seamless, of stainless steel
- Prodcom 24201150 - Line pipe, of a kind used for oil or gas pipelines, seamless, of steel other than stainless steel
- Prodcom 24201210 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of stainless steel
- Prodcom 24201250 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of steel other than stainless steel
- Prodcom 24201310 - Tubes and pipes, of circular cross-section, seamless, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill pipe used for oil or gas drilling)
- Prodcom 24201330 - Precision tubes and pipes, of circular cross-section, colddrawn or cold-rolled, seamless, of steel other than stainless steel
- Prodcom 24201350 - Tubes and pipes, of circular cross-section, cold-drawn or coldrolled, s eamless, of steel other than stainless steel (excluding precision tubes and pipes)
- Prodcom 24201370 - Tubes and pipes, of circular cross-section, hot-finished, s eamless, of steel other than stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill-pipe used for oil or gas drilling)
- Prodcom 24201400 - Tubes and pipes, of non-circular cross-section, seamless, a nd hollow profiles, seamless, of steel
- Prodcom 24202110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202150 - Line pipe, of a kind used for oil or gas pipelines, other than longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202200 - Casing, of a kind used in drilling for oil or gas, welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202300 - Tubes and pipes, welded, of an external diameter > .406,4 mm, of steel (excluding line pipe of a kind used for oil or gas pipelines and casing used for oil or gas drilling)
- Prodcom 24202400 - Tubes and pipes, riveted or similarly closed, of an external diameter > .406,4 mm, of steel (excluding line pipe for oil and gas pipelines, casing used for oil or gas drilling and welded tubes and pipes)
- Prodcom 24203110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203150 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203210 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203250 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203310 - Tubes and pipes, of circular cross-section, welded, of an external diameter . .406,4 mm, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing used for oil or gas drilling)
- Prodcom 24203340 - Precision tubes and pipes, of circular cross-section, welded, o f an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203370 - Tubes and pipes, of circular cross-section, hot- or coldformed and welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203410 - Tubes and pipes, of non-circular cross-section, hot- or coldformed and welded, of stainless steel
- Prodcom 24203430 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness . 2 mm, hotor cold-formed and welded, of steel other than stainless steel
- Prodcom 24203450 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness > 2 mm, hot-or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203470 - Tubes and pipes, of other non-circular cross-section than square or rectangular, hot- or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203500 - Tubes and pipes, open seam, riveted or similarly closed, of steel (excluding line pipe for oil and gas pipelines, casing and tubing used for oil or gas drilling and other welded tubes and pipes)
- Prodcom 24512000 - Tubes, pipes and hollow profiles of cast iron excluding tubes, p ipes, hollow profiles made into identifiable parts of articles, s uch as sections of central heating radiators and machinery parts
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Benelux, split by region and country
- Trade (exports and imports) in Benelux
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Belgium
- Luxembourg
- Netherlands
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Asia.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the U.S..
This report provides an in-depth analysis of the market for iron or steel pipe and tube in China.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the EU.
This report provides an in-depth analysis of the global market for iron or steel pipe and tube.