Blog → Basic Metals → Basic Iron And Steel → Flat-Rolled Products Of Iron Or Steel (Not Further Worked Than Hot-Rolled)

Article Publishing Date: Jul 26, 2018

Which Country Exports the Most Metal-Rolling Mills and Rolls Therefor in the World?

Global metal-rolling mills and rolls therefor exports amounted to X tonnes in 2016, waning by -X% against the previous year figure. Overall, metal-rolling mills and rolls therefor exports continue to indicate a deep shrinkage. The most prominent rate of growth was recorded in 2013, when exports increased by X% year-to-year. Over the period under review, global metal-rolling mills and rolls therefor exports reached its maximum volume of X tonnes in 2008; however, from 2009 to 2016, it failed to regain its strength.

In value terms, metal-rolling mills and rolls therefor exports stood at $X in 2016. Overall, metal-rolling mills and rolls therefor exports continue to indicate a drastic deduction. In that year, global metal-rolling mills and rolls therefor exports reached its maximum level of $X. From 2009 to 2016, growth of global metal-rolling mills and rolls therefor exports stood at a somewhat lower level.

Top Metal-Rolling Mills and Rolls Therefor Exporting Countries in the World

X. Italy (X million USD)

X. China (X million USD)

X. Germany (X million USD)

X. Japan (X million USD)

X. USA (X million USD)

X. India (X million USD)

X. South Korea (X million USD)

X. Austria (X million USD)

X. France (X million USD)

X. United Kingdom (X million USD)

X. Slovenia (X million USD)

X. Ukraine (X million USD)

Metal-Rolling Mills and Rolls Therefor Exports By Country

In 2016, China (X tonnes), distantly followed by Italy (X tonnes), Germany (X tonnes), Japan (X tonnes), the U.S. (X tonnes), and South Korea (X tonnes) were the main exporters of metal-rolling mills and rolls therefor, together generating X% of total exports. Austria (X tonnes), India (X tonnes), France (X tonnes), the UK (X tonnes), Ukraine (X tonnes), and Slovenia (X tonnes) took the mild share of total exports.

From 2007 to 2016, the most notable growth rate of metal-rolling mills and rolls therefor exports, among the main exporting countries, was attained by Slovenia (+X% per year), while the other global leaders experienced mixed trends in the exports figures.

In value terms, Italy ($X), China ($X) and Germany ($X) were the countries with the highest levels of exports in 2016, with a combined X% share of global exports.Japan, the U.S., India, South Korea, Austria, France, the UK, Slovenia and Ukraine lagged somewhat behind, together accounting for a further X%.

India (+X% per year) recorded the highest growth rate of metal-rolling mills and rolls therefor exports, in terms of the main exporting countries, over the last X year period, while the other global leaders experienced more modest paces of growth.

Metal-Rolling Mills and Rolls Therefor Export Prices By Country

In 2016, the average export price for metal-rolling mills and rolls therefor amounted to $X per tonne, stabilizing at the previous year level. Overall, metal-rolling mills and rolls therefor export price continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2008, when it surged by X% from the previous year level. Global metal-rolling mills and rolls therefor export peaked of $X per tonne in 2009; however, from 2010 to 2016, it stood at a somewhat lower level.

There were significant differences in the average export prices amongst major exporting countries. In 2016, the country with the highest export prices was Italy ($X per kg), while Ukraine ($X per tonne) was among the lowest.

From 2007 to 2016, the most notable growth rate of metal-rolling mills and rolls therefor export prices was attained by China (+X% per year), while the other global leaders experienced more modest paces of growth.

Do you want to know more about global metal-rolling mills and rolls therefor market? Get the latest trends and insight from our report. It includes a wide range of statistics on

metal-rolling mills and rolls therefor market share
metal-rolling mills and rolls therefor prices
metal-rolling mills and rolls therefor industry
metal-rolling mills and rolls therefor sales
metal-rolling mills and rolls therefor import
metal-rolling mills and rolls therefor export
metal-rolling mills and rolls therefor market forecast
metal-rolling mills and rolls therefor price forecast
key metal-rolling mills and rolls therefor producers

This article was written on the product's HS-code: X.

Source: IndexBox Platform

Product coverage:

• Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils

• Prodcom 24103130 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, not in coils, simply hot-rolled, not clad, plated or coated, w ith patterns in relief directly due to the rolling process and products of a thickness < 4,75 mm, without patterns in relief

• Prodcom 24103150 - Flat-rolled products, of iron or non-alloy steel, of a width . .600 mm (excluding

• Prodcom 24103210 - Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > .150 mm but < .600 mm and a thickness of . 4 mm, not in coils, without patterns in relief, commonly

• Prodcom 24103230 - Flat-rolled products of iron or non-alloy steel, of a width < .600 mm, simply hot-rolled, not clad, plated or coated (excluding

• Prodcom 24103330 - Plates and sheets produced by cutting from hot-rolled wide strip of a width of .600 mm or more, of stainless steel

• Prodcom 24103340 - Plates and sheets produced on a reversing mill (quarto) of a width of .600 mm or more and wide flats, of stainless steel

• Prodcom 241033Z0 - Hot-rolled flat products in coil of a width . .600 mm, of stainless steel

• Prodcom 241034Z0 - Hot-rolled flat products in coil of a width < .600 mm, of stainless steel

• Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)

• Prodcom 24103520 - Flat-rolled products of high-speed steel, of a width . .600 mm, h ot-rolled or cold-rolled

• Prodcom 24103530 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, not in coils (excluding organic coated products, p roducts of a thickness < 4,75 mm and products of high-

• Prodcom 24103540 - Flat-rolled products of alloy steel other than stainless, of a width . .600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excluding products of tool steel, high-speed steel or silicon-electrical steel)

• Prodcom 24103600 - Flat-rolled products of alloy steel other than stainless, of a width of < .600 mm, not further worked than hot-rolled (excluding products of high-speed steel or silicon-electrical steel)

This report provides an in-depth analysis of the global hot-rolled steel products market. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2025.

Country coverage:

Worldwide - the report contains statistical data for 200 countries and includes detailed profiles of the 50 largest consuming countries:

+ the largest producing countries

Data coverage:

• Global market volume and value

• Per Capita consumption

• Forecast of the market dynamics in the medium term

• Global production, split by region and country

• Global trade (exports and imports)

• Export and import prices

• Market trends, drivers and restraints

• Key market players and their profiles

Reasons to buy this report:

• Take advantage of the latest data

• Find deeper insights into current market developments

• Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

1. How to diversify your business and benefit from new market opportunities

2. How to load your idle production capacity

3. How to boost your sales on overseas markets

4. How to increase your profit margins

5. How to make your supply chain more sustainable

6. How to reduce your production and supply chain costs

7. How to outsource production to other countries

8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1

REPORT DESCRIPTION

1.2

RESEARCH METHODOLOGY AND AI PLATFORM

1.3

DATA-DRIVEN DECISIONS FOR YOUR BUSINESS

1.4

GLOSSARY AND SPECIFIC TERMS

2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1

KEY FINDINGS

2.2

MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO

3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1

MARKET SIZE

3.2

CONSUMPTION BY COUNTRY

3.3

MARKET FORECAST TO 2030

4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

This Chapter is Available Only for the Professional Edition PRO

4.1

Which Country Exports the Most Metal-Rolling Mills and Rolls Therefor in the World?

Top Metal-Rolling Mills and Rolls Therefor Exporting Countries in the World

Metal-Rolling Mills and Rolls Therefor Exports By Country

Metal-Rolling Mills and Rolls Therefor Export Prices By Country

Recommended posts