Uruguay - Flat-Rolled Products of Iron or Steel (Not Further Worked Than Hot-Rolled) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingUruguay: Hot-Rolled Steel Products Market 2024
Hot-Rolled Steel Products Market Size in Uruguay
The Uruguayan hot-rolled steel products market expanded to $X in 2022, with an increase of X% against the previous year. Over the period under review, the total consumption indicated a resilient increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2020 indices. As a result, consumption reached the peak level of $X. From 2021 to 2022, the growth of the market failed to regain momentum.
Hot-Rolled Steel Products Production in Uruguay
In value terms, hot-rolled steel products production stood at $X in 2022 estimated in export price. In general, production continues to indicate a resilient increase. The most prominent rate of growth was recorded in 2017 when the production volume increased by X%. Over the period under review, production hit record highs at $X in 2020; however, from 2021 to 2022, production stood at a somewhat lower figure.
Hot-Rolled Steel Products Exports
Exports from Uruguay
In 2022, the amount of flat-rolled products of iron or steel (not further worked than hot-rolled) exported from Uruguay skyrocketed to X tons, rising by X% against the year before. Over the period under review, exports, however, showed a significant decrease. The most prominent rate of growth was recorded in 2019 with an increase of X%. Over the period under review, the exports attained the peak figure at X tons in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
In value terms, hot-rolled steel products exports skyrocketed to $X in 2022. Overall, exports, however, recorded a abrupt contraction. The pace of growth appeared the most rapid in 2020 with an increase of X%. Over the period under review, the exports hit record highs at $X in 2012; however, from 2013 to 2022, the exports remained at a lower figure.
Exports by Country
The UK (X tons) was the main destination for hot-rolled steel products exports from Uruguay, accounting for a X% share of total exports. Moreover, hot-rolled steel products exports to the UK exceeded the volume sent to the second major destination, Paraguay (X tons), threefold.
From 2012 to 2022, the average annual growth rate of volume to the UK amounted to X%.
In value terms, Paraguay ($X) and the UK ($X) constituted the largest markets for hot-rolled steel products exported from Uruguay worldwide.
Paraguay, with a CAGR of X%, saw the highest growth rate of the value of exports, in terms of the main countries of destination over the period under review.
Export Prices by Country
In 2022, the average hot-rolled steel products export price amounted to $X per ton, rising by X% against the previous year. Over the period under review, the export price showed a temperate expansion. The pace of growth appeared the most rapid in 2018 when the average export price increased by X% against the previous year. As a result, the export price attained the peak level of $X per ton. From 2019 to 2022, the average export prices remained at a lower figure.
There were significant differences in the average prices for the major export markets. In 2022, amid the top suppliers, the country with the highest price was Paraguay ($X per ton), while the average price for exports to the UK totaled $X per ton.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Paraguay (X%), while the prices for the other major destinations experienced a decline.
Hot-Rolled Steel Products Imports
Imports into Uruguay
In 2022, overseas purchases of flat-rolled products of iron or steel (not further worked than hot-rolled) decreased by X% to X tons for the first time since 2018, thus ending a three-year rising trend. Overall, imports showed a abrupt shrinkage. The growth pace was the most rapid in 2017 with an increase of X% against the previous year. Imports peaked at X tons in 2012; however, from 2013 to 2022, imports remained at a lower figure.
In value terms, hot-rolled steel products imports soared to $X in 2022. In general, imports showed a pronounced setback. The pace of growth appeared the most rapid in 2017 when imports increased by X% against the previous year. Over the period under review, imports attained the peak figure at $X in 2012; however, from 2013 to 2022, imports failed to regain momentum.
Imports by Country
Brazil (X tons), Argentina (X tons) and China (X tons) were the main suppliers of hot-rolled steel products imports to Uruguay, together comprising X% of total imports. Turkey and Mexico lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Mexico (with a CAGR of X%), while imports for the other leaders experienced mixed trend patterns.
In value terms, the largest hot-rolled steel products suppliers to Uruguay were Brazil ($X), Argentina ($X) and China ($X), together accounting for X% of total imports. Turkey and Mexico lagged somewhat behind, together accounting for a further X%.
Among the main suppliers, Mexico, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average hot-rolled steel products import price amounted to $X per ton, increasing by X% against the previous year. Overall, import price indicated a moderate expansion from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, hot-rolled steel products import price increased by X% against 2020 indices. The pace of growth appeared the most rapid in 2021 an increase of X% against the previous year. The import price peaked in 2022 and is likely to continue growth in the immediate term.
Average prices varied noticeably amongst the major supplying countries. In 2022, amid the top importers, the countries with the highest prices were Brazil ($X per ton) and Argentina ($X per ton), while the price for Turkey ($X per ton) and Mexico ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Argentina (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the hot-rolled steel products market in Uruguay. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103130 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, not in coils, simply hot-rolled, not clad, plated or coated, w ith patterns in relief directly due to the rolling process and products of a thickness < 4,75 mm, without patterns in relief
- Prodcom 24103150 - Flat-rolled products, of iron or non-alloy steel, of a width . .600 mm (excluding
- Prodcom 24103210 - Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > .150 mm but < .600 mm and a thickness of . 4 mm, not in coils, without patterns in relief, commonly
- Prodcom 24103230 - Flat-rolled products of iron or non-alloy steel, of a width < .600 mm, simply hot-rolled, not clad, plated or coated (excluding
- Prodcom 24103330 - Plates and sheets produced by cutting from hot-rolled wide strip of a width of .600 mm or more, of stainless steel
- Prodcom 24103340 - Plates and sheets produced on a reversing mill (quarto) of a width of .600 mm or more and wide flats, of stainless steel
- Prodcom 241033Z0 - Hot-rolled flat products in coil of a width . .600 mm, of stainless steel
- Prodcom 241034Z0 - Hot-rolled flat products in coil of a width < .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24103520 - Flat-rolled products of high-speed steel, of a width . .600 mm, h ot-rolled or cold-rolled
- Prodcom 24103530 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, not in coils (excluding organic coated products, p roducts of a thickness < 4,75 mm and products of high-
- Prodcom 24103540 - Flat-rolled products of alloy steel other than stainless, of a width . .600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excluding products of tool steel, high-speed steel or silicon-electrical steel)
- Prodcom 24103600 - Flat-rolled products of alloy steel other than stainless, of a width of < .600 mm, not further worked than hot-rolled (excluding products of high-speed steel or silicon-electrical steel)
Country coverage:
- Uruguay
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Uruguay
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the hot-rolled steel products market in Asia.
This report provides an in-depth analysis of the hot-rolled steel products market in the U.S..
This report provides an in-depth analysis of the hot-rolled steel products market in China.
This report provides an in-depth analysis of the hot-rolled steel products market in the EU.
This report provides an in-depth analysis of the global hot-rolled steel products market.
- Hot-Rolled Steel Products Price Uruguay
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market