SADC - Plastic Plates, Sheets, Film, Foil and Strip - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSADC: Market for Plastic Plates, Sheets, Film, Foil And Strip 2024
Market Size for Plastic Plates, Sheets, Film, Foil And Strip in SADC
The SADC market for plastic plates, sheets, film, foil and strip was estimated at $X in 2022, increasing by X% against the previous year. The total consumption indicated a remarkable increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2020 indices. As a result, consumption attained the peak level of $X. From 2021 to 2022, the growth of the market remained at a somewhat lower figure.
Production of Plastic Plates, Sheets, Film, Foil And Strip in SADC
In value terms, production of plastic plates, sheets, film, foil and strip expanded significantly to $X in 2022 estimated in export price. The total production indicated prominent growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The growth pace was the most rapid in 2020 when the production volume increased by X%. As a result, production attained the peak level of $X. From 2021 to 2022, production of growth failed to regain momentum.
Exports of Plastic Plates, Sheets, Film, Foil And Strip
Exports in SADC
In 2022, overseas shipments of plastic plates, sheets, film, foil and strip were finally on the rise to reach X tons for the first time since 2018, thus ending a three-year declining trend. The total export volume increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. As a result, the exports reached the peak and are likely to continue growth in the immediate term.
In value terms, exports of plastic plates, sheets, film, foil and strip soared to $X in 2022. Total exports indicated a resilient expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. As a result, the exports attained the peak and are likely to continue growth in the immediate term.
Exports by Country
South Africa dominates strip structure, reaching X tons, which was approx. X% of total exports in 2022. It was distantly followed by Zambia (X tons), creating a X% share of total exports. Namibia (X tons), Malawi (X tons) and Tanzania (X tons) held a minor share of total exports.
Exports from South Africa increased at an average annual rate of X% from 2012 to 2022. At the same time, Zambia (X%), Namibia (X%) and Malawi (X%) displayed positive paces of growth. Moreover, Zambia emerged as the fastest-growing exporter exported in SADC, with a CAGR of X% from 2012-2022. By contrast, Tanzania (X%) illustrated a downward trend over the same period. Zambia (X p.p.), Namibia (X p.p.) and Malawi (X p.p.) significantly strengthened its position in terms of the total exports, while Tanzania and South Africa saw its share reduced by X% and X% from 2012 to 2022, respectively.
In value terms, South Africa ($X) remains the largest plastic plate, sheet, film, foil and strip supplier in SADC, comprising X% of total exports. The second position in the ranking was taken by Namibia ($X), with a X% share of total exports. It was followed by Zambia, with a X% share.
From 2012 to 2022, the average annual growth rate of value in South Africa amounted to X%. In the other countries, the average annual rates were as follows: Namibia (X% per year) and Zambia (X% per year).
Export Prices by Country
The export price in SADC stood at $X per ton in 2022, approximately reflecting the previous year. Overall, the export price, however, showed a relatively flat trend pattern. The pace of growth was the most pronounced in 2021 an increase of X% against the previous year. As a result, the export price attained the peak level of $X per ton, leveling off in the following year.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Namibia ($X per ton), while Zambia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Namibia (X%), while the other leaders experienced more modest paces of growth.
Imports of Plastic Plates, Sheets, Film, Foil And Strip
Imports in SADC
In 2022, the amount of plastic plates, sheets, film, foil and strip imported in SADC totaled X tons, growing by X% compared with the previous year. Total imports indicated a prominent increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 with an increase of X%. The volume of import peaked in 2022 and is expected to retain growth in years to come.
In value terms, imports of plastic plates, sheets, film, foil and strip skyrocketed to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2021 when imports increased by X% against the previous year. The level of import peaked in 2022 and is expected to retain growth in the immediate term.
Imports by Country
South Africa represented the main importing country with an import of about X tons, which accounted for X% of total imports. It was distantly followed by Tanzania (X tons), Democratic Republic of the Congo (X tons), Zambia (X tons), Angola (X tons) and Zimbabwe (X tons), together generating a X% share of total imports. The following importers - Mauritius (X tons) and Botswana (X tons) - each finished at a X% share of total imports.
From 2012 to 2022, average annual rates of growth with regard to plastic plate, sheet, film, foil and strip imports into South Africa stood at X%. At the same time, Democratic Republic of the Congo (X%), Botswana (X%), Zambia (X%), Zimbabwe (X%), Angola (X%), Tanzania (X%) and Mauritius (X%) displayed positive paces of growth. Moreover, Democratic Republic of the Congo emerged as the fastest-growing importer imported in SADC, with a CAGR of X% from 2012-2022. While the share of Democratic Republic of the Congo (X p.p.), Zambia (X p.p.), Tanzania (X p.p.), Angola (X p.p.) and Zimbabwe (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of South Africa (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, South Africa ($X) constitutes the largest market for imported plastic plates, sheets, film, foil and strip in SADC, comprising X% of total imports. The second position in the ranking was held by Zambia ($X), with a X% share of total imports. It was followed by Angola, with a X% share.
From 2012 to 2022, the average annual growth rate of value in South Africa was relatively modest. The remaining importing countries recorded the following average annual rates of imports growth: Zambia (X% per year) and Angola (X% per year).
Import Prices by Country
The import price in SADC stood at $X per ton in 2022, surging by X% against the previous year. In general, the import price, however, recorded a slight curtailment. The pace of growth appeared the most rapid in 2021 when the import price increased by X%. The level of import peaked at $X per ton in 2012; however, from 2013 to 2022, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Zambia ($X per ton), while Botswana ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by South Africa (X%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in SADC. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22213010 - Other plates..., of polymers of ethylene, not reinforced, t hickness . 0,125 mm
- Prodcom 22213017 - Other plates..., of polymers of ethylene, not reinforced, etc., t hickness > 0,125 mm
- Prodcom 22213021 - Other plates..., of biaxially orientated polymers of propylene, t hickness . 0,10 mm
- Prodcom 22213023 - Other plates..., of polymers of propylene, thickness . 0,10 mm, others
- Prodcom 22213026 - Strip of polymers of propylene, of a thickness of > 0,10 mm and a width of > 5 mm but . .20 mm, of the kind used for packaging (excluding self-adhesive products)
- Prodcom 22213030 - Other plates..., of polymers of styrene, not reinforced, etc.
- Prodcom 22213035 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213036 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213037 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213038 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213053 - Plates..., of polymethyl methacrylate, not reinforced, etc.
- Prodcom 22213059 - Plates..., of other acrylic polymers, not reinforced, etc., n.e.c.
- Prodcom 22213061 - Plates, sheets, film, foil, strip of polycarbonates, non-cellular excluding floor, wall, ceiling coverings - self-adhesive, r einforced, laminated, supported/similarly combined with other materials
- Prodcom 22213063 - Plates..., of unsaturated polyesters, not reinforced, etc.
- Prodcom 22213065 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness . 0,35 mm
- Prodcom 22213067 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness > 0,35 mm
- Prodcom 22213069 - Plates, sheets, film, foil, strip of polyesters, non-cellular excluding floor, wall, ceiling coverings, self-adhesive - of polycarbonates, polyethylene terephthalate, unsaturated polyesters
- Prodcom 22213070 - Plates, sheets, film, foil and strip, of non-cellular cellulose or its chemical derivatives, not reinforced, laminated, supported or similarly combined with other materials (excluding selfadhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213082 - Plates, sheets, film, foil, strip of polyamides, non-cellular (excluding floor, wall, ceiling coverings, self-adhesive, r einforced, laminated, supported/similarly combined with other materials)
- Prodcom 22213086 - Plates, sheets, film, foil and strip, of non-cellular poly(vinyl butyral), amino-resins, phenolic resins or polymerisation products, not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213090 - Plates, sheets, film, foil and strip, of non-cellular plastics, n .e.c., not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products, floor, wall and ceiling coverings of HS
Country coverage:
- Angola
- Botswana
- Comoros
- Democratic Republic of the Congo
- Lesotho
- Madagascar
- Malawi
- Mauritius
- Mozambique
- Namibia
- Seychelles
- South Africa
- Swaziland
- Tanzania
- Zambia
- Zimbabwe
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in SADC, split by region and country
- Trade (exports and imports) in SADC
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Angola
- Botswana
- Comoros
- Democratic Republic of the Congo
- Lesotho
- Madagascar
- Malawi
- Mauritius
- Mozambique
- Namibia
- Seychelles
- South Africa
- Swaziland
- Tanzania
- Zambia
- Zimbabwe
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Asia.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the U.S..
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in China.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the EU.
This report provides an in-depth analysis of the global market for plastic plate, sheet, film, foil and strip.