SADC - Plastic Fittings for Tubes, Pipes and Hoses - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSADC: Market for Plastic Fittings for Tubes, Pipes and Hoses 2024
Market Size for Plastic Fittings for Tubes, Pipes and Hoses in SADC
The SADC market for plastic fittings for tubes, pipes and hoses rose significantly to $X in 2023, growing by X% against the previous year. The market value increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern remained relatively stable, with only minor fluctuations throughout the analyzed period. As a result, consumption attained the peak level of $X. From 2022 to 2023, the growth of the market remained at a somewhat lower figure.
Production of Plastic Fittings for Tubes, Pipes and Hoses in SADC
In value terms, production of plastic fittings for tubes, pipes and hoses rose sharply to $X in 2023 estimated in export price. Overall, production showed a modest increase. The most prominent rate of growth was recorded in 2014 when the production volume increased by X%. The level of production peaked at $X in 2021; however, from 2022 to 2023, production stood at a somewhat lower figure.
Exports of Plastic Fittings for Tubes, Pipes and Hoses
Exports in SADC
In 2023, exports of plastic fittings for tubes, pipes and hoses in SADC declined to X tons, dropping by X% on 2022 figures. Total exports indicated slight growth from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. As a result, the exports reached the peak of X tons. From 2022 to 2023, the growth of the exports of remained at a somewhat lower figure.
In value terms, exports of plastic fittings for tubes, pipes and hoses declined dramatically to $X in 2023. Overall, exports saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2021 with an increase of X% against the previous year. As a result, the exports reached the peak of $X. From 2022 to 2023, the growth of the exports of remained at a lower figure.
Exports by Country
South Africa dominates hoses structure, finishing at X tons, which was near X% of total exports in 2023. It was distantly followed by Botswana (X tons), making up a X% share of total exports. Zambia (X tons) followed a long way behind the leaders.
South Africa experienced a relatively flat trend pattern with regard to volume of exports of plastic fittings for tubes, pipes and hoses. At the same time, Botswana (X%) and Zambia (X%) displayed positive paces of growth. Moreover, Botswana emerged as the fastest-growing exporter exported in SADC, with a CAGR of X% from 2012-2023. Botswana (X p.p.) significantly strengthened its position in terms of the total exports, while South Africa saw its share reduced by X% from 2012 to 2023, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, South Africa ($X) remains the largest plastic fittings for tubes, pipes and hoses supplier in SADC, comprising X% of total exports. The second position in the ranking was taken by Botswana ($X), with a X% share of total exports.
From 2012 to 2023, the average annual rate of growth in terms of value in South Africa was relatively modest. In the other countries, the average annual rates were as follows: Botswana (X% per year) and Zambia (X% per year).
Export Prices by Country
The export price in SADC stood at $X per ton in 2023, reducing by X% against the previous year. Overall, the export price showed a slight downturn. The most prominent rate of growth was recorded in 2021 when the export price increased by X%. As a result, the export price attained the peak level of $X per ton. From 2022 to 2023, the export prices remained at a somewhat lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Zambia ($X per ton), while Botswana ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by South Africa (X%), while the other leaders experienced a decline in the export price figures.
Imports of Plastic Fittings for Tubes, Pipes and Hoses
Imports in SADC
Imports of plastic fittings for tubes, pipes and hoses stood at X tons in 2023, surging by X% against 2022 figures. The total import volume increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when imports increased by X% against the previous year. As a result, imports attained the peak of X tons. From 2022 to 2023, the growth of imports of remained at a lower figure.
In value terms, imports of plastic fittings for tubes, pipes and hoses declined modestly to $X in 2023. Overall, imports showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 when imports increased by X%. The level of import peaked at $X in 2022, and then dropped in the following year.
Imports by Country
The purchases of the four major importers of plastic fittings for tubes, pipes and hoses, namely South Africa, Zambia, Tanzania and Democratic Republic of the Congo, represented more than half of total import. Mozambique (X tons) held the next position in the ranking, followed by Zimbabwe (X tons) and Botswana (X tons). All these countries together took near X% share of total imports. Angola (X tons), Namibia (X tons), Swaziland (X tons), Seychelles (X tons), Madagascar (X tons) and Mauritius (X tons) followed a long way behind the leaders.
From 2012 to 2023, the biggest increases were recorded for Seychelles (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, South Africa ($X) constitutes the largest market for imported plastic fittings for tubes, pipes and hoses in SADC, comprising X% of total imports. The second position in the ranking was taken by Democratic Republic of the Congo ($X), with a X% share of total imports. It was followed by Zambia, with an X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in South Africa was relatively modest. The remaining importing countries recorded the following average annual rates of imports growth: Democratic Republic of the Congo (X% per year) and Zambia (X% per year).
Import Prices by Country
In 2023, the import price in SADC amounted to $X per ton, falling by X% against the previous year. In general, the import price recorded a mild downturn. The most prominent rate of growth was recorded in 2017 an increase of X% against the previous year. The level of import peaked at $X per ton in 2013; however, from 2014 to 2023, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Mauritius ($X per ton), while Zambia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Mauritius (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in SADC. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22212970 - Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, p ipes and hoses
Country coverage:
- Angola
- Botswana
- Comoros
- Democratic Republic of the Congo
- Lesotho
- Madagascar
- Malawi
- Mauritius
- Mozambique
- Namibia
- Seychelles
- South Africa
- Swaziland
- Tanzania
- Zambia
- Zimbabwe
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in SADC, split by region and country
- Trade (exports and imports) in SADC
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Angola
- Botswana
- Comoros
- Democratic Republic of the Congo
- Lesotho
- Madagascar
- Malawi
- Mauritius
- Mozambique
- Namibia
- Seychelles
- South Africa
- Swaziland
- Tanzania
- Zambia
- Zimbabwe
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in Asia.
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in the U.S..
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in China.
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in the EU.
This report provides an in-depth analysis of the global market for plastic fittings for tubes, pipes and hoses.
- Plastic Fittings for Tubes Market
- Frozen and Fresh or Chilled Skipjack Tuna Market
- Frozen and Fresh or Chilled Southern Bluefin Tuna Market
- Frozen Atlantic Salmon and Danube Salmon Market
- Tilapias Market
- Frozen Market
- Frozen Scallops Market
- Jellyfish Market
- Non-Citrus Fruits not Elsewhere Classified Market
- Battered Fish Fillet Market