EU - Plastic Fittings for Tubes, Pipes and Hoses - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEU: Market for Plastic Fittings for Tubes, Pipes and Hoses 2024
Market Size for Plastic Fittings for Tubes, Pipes and Hoses in the EU
In 2023, after three years of growth, there was decline in the EU market for plastic fittings for tubes, pipes and hoses, when its value decreased by X% to $X. The total consumption indicated a moderate expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, consumption increased by X% against 2016 indices. Over the period under review, the market attained the maximum level at $X in 2022, and then contracted slightly in the following year.
Production of Plastic Fittings for Tubes, Pipes and Hoses in the EU
In value terms, production of plastic fittings for tubes, pipes and hoses contracted slightly to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2021 when the production volume increased by X%. The level of production peaked at $X in 2022, and then contracted slightly in the following year.
Exports of Plastic Fittings for Tubes, Pipes and Hoses
Exports in the EU
In 2023, overseas shipments of plastic fittings for tubes, pipes and hoses decreased by X% to X tons, falling for the second consecutive year after two years of growth. In general, exports, however, continue to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. As a result, the exports attained the peak of X tons. From 2022 to 2023, the growth of the exports of remained at a somewhat lower figure.
In value terms, exports of plastic fittings for tubes, pipes and hoses totaled $X in 2023. Total exports indicated a temperate expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2021 with an increase of X%. As a result, the exports attained the peak of $X. From 2022 to 2023, the growth of the exports of remained at a lower figure.
Exports by Country
In 2023, Germany (X tons), distantly followed by Italy (X tons), Poland (X tons), the Netherlands (X tons), Austria (X tons) and Spain (X tons) represented the main exporters of plastic fittings for tubes, pipes and hoses, together mixing up X% of total exports. France (X tons), Sweden (X tons), Romania (X tons), Denmark (X tons), the Czech Republic (X tons), Hungary (X tons) and Portugal (X tons) held a minor share of total exports.
From 2012 to 2023, the biggest increases were recorded for Romania (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) remains the largest plastic fittings for tubes, pipes and hoses supplier in the European Union, comprising X% of total exports. The second position in the ranking was taken by Italy ($X), with a X% share of total exports. It was followed by Austria, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in Germany totaled X%. The remaining exporting countries recorded the following average annual rates of exports growth: Italy (X% per year) and Austria (X% per year).
Export Prices by Country
In 2023, the export price in the European Union amounted to $X per ton, rising by X% against the previous year. Over the period from 2012 to 2023, it increased at an average annual rate of X%. As a result, the export price attained the peak level and is likely to continue growth in the immediate term.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was France ($X per ton), while Romania ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by France (X%), while the other leaders experienced more modest paces of growth.
Imports of Plastic Fittings for Tubes, Pipes and Hoses
Imports in the EU
In 2023, purchases abroad of plastic fittings for tubes, pipes and hoses decreased by X% to X tons, falling for the second year in a row after ten years of growth. Total imports indicated perceptible growth from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2021 when imports increased by X% against the previous year. As a result, imports attained the peak of X tons. From 2022 to 2023, the growth of imports of failed to regain momentum.
In value terms, imports of plastic fittings for tubes, pipes and hoses totaled $X in 2023. Total imports indicated a resilient increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2015 indices. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. The level of import peaked in 2023 and is likely to see gradual growth in the immediate term.
Imports by Country
In 2023, Germany (X tons), followed by Sweden (X tons), France (X tons), Belgium (X tons), the Netherlands (X tons), Poland (X tons), Italy (X tons) and Spain (X tons) represented the key importers of plastic fittings for tubes, pipes and hoses, together creating X% of total imports. Romania (X tons), the Czech Republic (X tons), Denmark (X tons), Austria (X tons) and Hungary (X tons) followed a long way behind the leaders.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the main importing countries, was attained by Sweden (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) constitutes the largest market for imported plastic fittings for tubes, pipes and hoses in the European Union, comprising X% of total imports. The second position in the ranking was taken by France ($X), with a X% share of total imports. It was followed by the Netherlands, with a X% share.
In Germany, imports of plastic fittings for tubes, pipes and hoses increased at an average annual rate of X% over the period from 2012-2023. In the other countries, the average annual rates were as follows: France (X% per year) and the Netherlands (X% per year).
Import Prices by Country
The import price in the European Union stood at $X per ton in 2023, rising by X% against the previous year. Over the period from 2012 to 2023, it increased at an average annual rate of X%. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Austria ($X per ton), while Sweden ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22212970 - Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, p ipes and hoses
Country coverage:
- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in the EU, split by region and country
- Trade (exports and imports) in the EU
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in Asia.
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in the U.S..
This report provides an in-depth analysis of the market for plastic fittings for tubes, pipes and hoses in China.
This report provides an in-depth analysis of the global market for plastic fittings for tubes, pipes and hoses.
- Plastic Fittings for Tubes Market
- Frozen and Fresh or Chilled Skipjack Tuna Market
- Frozen and Fresh or Chilled Southern Bluefin Tuna Market
- Frozen Atlantic Salmon and Danube Salmon Market
- Tilapias Market
- Frozen Market
- Frozen Scallops Market
- Jellyfish Market
- Non-Citrus Fruits not Elsewhere Classified Market
- Battered Fish Fillet Market