Middle East - Cellular Plates, Sheets and Films of Polyymers of Styrene - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingMiddle East: Market for Cellular Plates, Sheets and Films of Polyymers of Styrene 2024
Market Size for Cellular Plates, Sheets and Films of Polyymers of Styrene in the Middle East
The Middle Eastern market for cellular plates, sheets and films of polyymers of styrene rose modestly to $X in 2023, surging by X% against the previous year. Overall, consumption showed a relatively flat trend pattern. As a result, consumption reached the peak level of $X. From 2019 to 2023, the growth of the market remained at a lower figure.
Production of Cellular Plates, Sheets and Films of Polyymers of Styrene in the Middle East
In value terms, production of cellular plates, sheets and films of polyymers of styrene rose markedly to $X in 2023 estimated in export price. Over the period under review, production posted a prominent increase. The most prominent rate of growth was recorded in 2018 with an increase of X%. As a result, production attained the peak level of $X. From 2019 to 2023, production of growth failed to regain momentum.
Exports of Cellular Plates, Sheets and Films of Polyymers of Styrene
Exports in the Middle East
In 2023, the amount of cellular plates, sheets and films of polyymers of styrene exported in the Middle East expanded rapidly to X tons, with an increase of X% on 2022 figures. In general, exports recorded a prominent expansion. The most prominent rate of growth was recorded in 2014 when exports increased by X%. Over the period under review, the exports of attained the maximum at X tons in 2021; however, from 2022 to 2023, the exports stood at a somewhat lower figure.
In value terms, exports of cellular plates, sheets and films of polyymers of styrene expanded remarkably to $X in 2023. Total exports indicated a strong increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2014 with an increase of X% against the previous year. Over the period under review, the exports of attained the maximum at $X in 2021; however, from 2022 to 2023, the exports remained at a lower figure.
Exports by Country
In 2023, Turkey (X tons) was the major exporter of cellular plates, sheets and films of polyymers of styrene, comprising X% of total exports. It was distantly followed by Palestine (X tons), Saudi Arabia (X tons) and Kuwait (X tons), together comprising a X% share of total exports. The United Arab Emirates (X tons) followed a long way behind the leaders.
From 2012 to 2023, average annual rates of growth with regard to polystyrene cellular plates, sheets and films exports from Turkey stood at X%. At the same time, Palestine (X%) displayed positive paces of growth. Moreover, Palestine emerged as the fastest-growing exporter exported in the Middle East, with a CAGR of X% from 2012-2023. Saudi Arabia experienced a relatively flat trend pattern. By contrast, the United Arab Emirates (X%) and Kuwait (X%) illustrated a downward trend over the same period. Turkey (X p.p.) and Palestine (X p.p.) significantly strengthened its position in terms of the total exports, while the United Arab Emirates, Saudi Arabia and Kuwait saw its share reduced by X%, X% and X% from 2012 to 2023, respectively.
In value terms, Turkey ($X) remains the largest polystyrene cellular plates, sheets and films supplier in the Middle East, comprising X% of total exports. The second position in the ranking was taken by Palestine ($X), with a X% share of total exports. It was followed by Kuwait, with an X% share.
In Turkey, exports of cellular plates, sheets and films of polyymers of styrene expanded at an average annual rate of X% over the period from 2012-2023. The remaining exporting countries recorded the following average annual rates of exports growth: Palestine (X% per year) and Kuwait (X% per year).
Export Prices by Country
The export price in the Middle East stood at $X per ton in 2023, waning by X% against the previous year. Over the period under review, the export price continues to indicate a pronounced curtailment. The pace of growth appeared the most rapid in 2021 an increase of X% against the previous year. Over the period under review, the export prices hit record highs at $X per ton in 2013; however, from 2014 to 2023, the export prices stood at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Palestine ($X per ton), while Turkey ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the United Arab Emirates (X%), while the other leaders experienced more modest paces of growth.
Imports of Cellular Plates, Sheets and Films of Polyymers of Styrene
Imports in the Middle East
In 2023, overseas purchases of cellular plates, sheets and films of polyymers of styrene were finally on the rise to reach X tons for the first time since 2020, thus ending a two-year declining trend. Total imports indicated a prominent increase from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2020 indices. The pace of growth was the most pronounced in 2013 when imports increased by X% against the previous year. Over the period under review, imports of hit record highs at X tons in 2020; however, from 2021 to 2023, imports remained at a lower figure.
In value terms, imports of cellular plates, sheets and films of polyymers of styrene expanded rapidly to $X in 2023. Total imports indicated a tangible increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2013 when imports increased by X% against the previous year. Over the period under review, imports of attained the maximum at $X in 2015; however, from 2016 to 2023, imports stood at a somewhat lower figure.
Imports by Country
Iraq prevails in styrene structure, resulting at X tons, which was near X% of total imports in 2023. Saudi Arabia (X tons) held the second position in the ranking, followed by Israel (X tons). All these countries together took approx. X% share of total imports. The following importers - the United Arab Emirates (X tons), Kuwait (X tons), Oman (X tons) and Bahrain (X tons) - together made up X% of total imports.
Iraq was also the fastest-growing in terms of the cellular plates, sheets and films of polyymers of styrene imports, with a CAGR of X% from 2012 to 2023. At the same time, Kuwait (X%), Bahrain (X%), Saudi Arabia (X%) and Israel (X%) displayed positive paces of growth. The United Arab Emirates experienced a relatively flat trend pattern. By contrast, Oman (X%) illustrated a downward trend over the same period. While the share of Iraq (X p.p.) increased significantly in terms of the total imports from 2012-2023, the share of Saudi Arabia (X p.p.), Israel (X p.p.), the United Arab Emirates (X p.p.) and Oman (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Iraq ($X) constitutes the largest market for imported cellular plates, sheets and films of polyymers of styrene in the Middle East, comprising X% of total imports. The second position in the ranking was held by Saudi Arabia ($X), with a X% share of total imports. It was followed by Israel, with a X% share.
In Iraq, imports of cellular plates, sheets and films of polyymers of styrene increased at an average annual rate of X% over the period from 2012-2023. In the other countries, the average annual rates were as follows: Saudi Arabia (X% per year) and Israel (X% per year).
Import Prices by Country
In 2023, the import price in the Middle East amounted to $X per ton, remaining constant against the previous year. Overall, the import price, however, recorded a noticeable decrease. The growth pace was the most rapid in 2021 when the import price increased by X%. Over the period under review, import prices attained the peak figure at $X per ton in 2012; however, from 2013 to 2023, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was the United Arab Emirates ($X per ton), while Iraq ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Saudi Arabia (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for polystyrene cellular plates, sheets and films in the Middle East. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22214120 - Cellular plates, sheet, film, foil and strip of polymers of styrene
Country coverage:
- Bahrain
- Iran
- Iraq
- Israel
- Jordan
- Kuwait
- Lebanon
- Oman
- Palestine
- Qatar
- Saudi Arabia
- Syrian Arab Republic
- Turkey
- United Arab Emirates
- Yemen
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in the Middle East, split by region and country
- Trade (exports and imports) in the Middle East
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Bahrain
- Iran
- Iraq
- Israel
- Jordan
- Kuwait
- Lebanon
- Oman
- Palestine
- Qatar
- Saudi Arabia
- Syrian Arab Republic
- Turkey
- United Arab Emirates
- Yemen
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for polystyrene cellular plates, sheets and films in Asia.
This report provides an in-depth analysis of the market for polystyrene cellular plates, sheets and films in the U.S..
This report provides an in-depth analysis of the market for polystyrene cellular plates, sheets and films in China.
This report provides an in-depth analysis of the market for polystyrene cellular plates, sheets and films in the EU.
This report provides an in-depth analysis of the global market for polystyrene cellular plates, sheets and films.