MERCOSUR - Plastic Doors, Windows and Their Frames - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingMERCOSUR: Market for Plastic Doors, Windows And Their Frames 2024
Market Size for Plastic Doors, Windows And Their Frames in MERCOSUR
The MERCOSUR plastic doors and windows market dropped to $X in 2022, approximately mirroring the previous year. In general, consumption showed a relatively flat trend pattern. The level of consumption peaked at $X in 2019; afterwards, it flattened through to 2022.
Production of Plastic Doors, Windows And Their Frames in MERCOSUR
In value terms, plastic doors and windows production contracted to $X in 2022 estimated in export price. Overall, production, however, recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2017 when the production volume increased by X% against the previous year. Over the period under review, production attained the maximum level at $X in 2012; however, from 2013 to 2022, production failed to regain momentum.
Exports of Plastic Doors, Windows And Their Frames
Exports in MERCOSUR
In 2022, overseas shipments of plastic doors, windows and their frames were finally on the rise to reach X units after two years of decline. In general, exports continue to indicate a buoyant increase. The most prominent rate of growth was recorded in 2016 with an increase of X% against the previous year. Over the period under review, the exports attained the peak figure at X units in 2019; however, from 2020 to 2022, the exports stood at a somewhat lower figure.
In value terms, plastic doors and windows exports totaled $X in 2022. Over the period under review, exports recorded buoyant growth. The pace of growth appeared the most rapid in 2016 when exports increased by X%. The level of export peaked at $X in 2019; however, from 2020 to 2022, the exports failed to regain momentum.
Exports by Country
Brazil was the major exporter of plastic doors, windows and their frames in MERCOSUR, with the volume of exports accounting for X units, which was approx. X% of total exports in 2022. Chile (X units) took the second position in the ranking, followed by Peru (X units). All these countries together took near X% share of total exports. The following exporters - Argentina (X units) and Colombia (X units) - together made up X% of total exports.
Exports from Brazil increased at an average annual rate of X% from 2012 to 2022. At the same time, Peru (X%), Chile (X%) and Colombia (X%) displayed positive paces of growth. Moreover, Peru emerged as the fastest-growing exporter exported in MERCOSUR, with a CAGR of X% from 2012-2022. By contrast, Argentina (X%) illustrated a downward trend over the same period. From 2012 to 2022, the share of Peru, Chile and Brazil increased by X, X and X percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Brazil ($X) remains the largest plastic doors and windows supplier in MERCOSUR, comprising X% of total exports. The second position in the ranking was taken by Chile ($X), with a X% share of total exports. It was followed by Peru, with a X% share.
In Brazil, plastic doors and windows exports expanded at an average annual rate of X% over the period from 2012-2022. The remaining exporting countries recorded the following average annual rates of exports growth: Chile (X% per year) and Peru (X% per year).
Export Prices by Country
In 2022, the export price in MERCOSUR amounted to $X per unit, which is down by X% against the previous year. In general, the export price showed a noticeable decrease. The most prominent rate of growth was recorded in 2018 an increase of X%. Over the period under review, the export prices attained the maximum at $X per unit in 2013; however, from 2014 to 2022, the export prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Colombia ($X per unit), while Peru ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Brazil (X%), while the other leaders experienced a decline in the export price figures.
Imports of Plastic Doors, Windows And Their Frames
Imports in MERCOSUR
In 2022, approx. X units of plastic doors, windows and their frames were imported in MERCOSUR; increasing by X% against the previous year. In general, imports showed a prominent increase. The growth pace was the most rapid in 2013 with an increase of X% against the previous year. The volume of import peaked in 2022 and is expected to retain growth in years to come.
In value terms, plastic doors and windows imports surged to $X in 2022. Over the period under review, imports saw a buoyant expansion. The growth pace was the most rapid in 2021 with an increase of X% against the previous year. Over the period under review, imports hit record highs in 2022 and are likely to see gradual growth in years to come.
Imports by Country
In 2022, Brazil (X units), Chile (X units) and Colombia (X units) was the key importer of plastic doors, windows and their frames in MERCOSUR, generating X% of total import. Argentina (X units) held a X% share (based on physical terms) of total imports, which put it in second place, followed by Peru (X%) and Uruguay (X%). Paraguay (X units) followed a long way behind the leaders.
From 2012 to 2022, the biggest increases were recorded for Chile (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest plastic doors and windows importing markets in MERCOSUR were Chile ($X), Brazil ($X) and Colombia ($X), together accounting for X% of total imports.
Among the main importing countries, Chile, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the import price in MERCOSUR amounted to $X per unit, growing by X% against the previous year. Over the period under review, the import price, however, showed a noticeable slump. The level of import peaked at $X per unit in 2012; however, from 2013 to 2022, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Paraguay ($X per unit), while Brazil ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Paraguay (X%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic doors and windows in MERCOSUR. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22231450 - Plastic doors, windows and their frames and thresholds for doors
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in MERCOSUR, split by region and country
- Trade (exports and imports) in MERCOSUR
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Argentina
- Brazil
- Chile
- Colombia
- Ecuador
- Guyana
- Paraguay
- Peru
- Suriname
- Uruguay
- Venezuela
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic doors and windows in Asia.
This report provides an in-depth analysis of the market for plastic doors and windows in the U.S..
This report provides an in-depth analysis of the market for plastic doors and windows in China.
This report provides an in-depth analysis of the market for plastic doors and windows in the EU.
This report provides an in-depth analysis of the global market for plastic doors and windows.