Libya - Flat-Rolled Products of Iron or Steel (Not Further Worked Than Hot-Rolled) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingLibya: Hot-Rolled Steel Products Market 2024
Hot-Rolled Steel Products Market Size in Libya
The Libyan hot-rolled steel products market expanded modestly to $X in 2022, rising by X% against the previous year. The market value increased at an average annual rate of X% from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, consumption attained the peak level of $X. From 2017 to 2022, the growth of the market remained at a lower figure.
Hot-Rolled Steel Products Production in Libya
In value terms, hot-rolled steel products production declined to $X in 2022 estimated in export price. In general, the total production indicated a measured increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production increased by X% against 2020 indices. The growth pace was the most rapid in 2016 when the production volume increased by X% against the previous year. Over the period under review, production attained the maximum level at $X in 2019; however, from 2020 to 2022, production remained at a lower figure.
Hot-Rolled Steel Products Exports
Exports from Libya
In 2022, hot-rolled steel products exports from Libya fell notably to X tons, which is down by X% compared with the previous year. Overall, exports saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 with an increase of X% against the previous year. The exports peaked at X tons in 2014; however, from 2015 to 2022, the exports remained at a lower figure.
In value terms, hot-rolled steel products exports declined notably to $X in 2022. In general, exports, however, showed a prominent expansion. The pace of growth was the most pronounced in 2018 with an increase of X% against the previous year. The exports peaked at $X in 2021, and then shrank remarkably in the following year.
Exports by Country
Egypt (X tons), North Macedonia (X tons) and Tunisia (X tons) were the main destinations of hot-rolled steel products exports from Libya, together comprising X% of total exports. Spain, Turkey, Italy and Greece lagged somewhat behind, together accounting for a further X%.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Spain (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, the largest markets for hot-rolled steel products exported from Libya were Egypt ($X), North Macedonia ($X) and Tunisia ($X), together comprising X% of total exports. Italy, Turkey, Spain and Greece lagged somewhat behind, together comprising a further X%.
Among the main countries of destination, Spain, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average hot-rolled steel products export price stood at $X per ton in 2022, rising by X% against the previous year. Over the period under review, the export price recorded a resilient expansion. The pace of growth appeared the most rapid in 2021 when the average export price increased by X% against the previous year. Over the period under review, the average export prices attained the peak figure in 2022 and is likely to continue growth in the immediate term.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Greece ($X per ton), while the average price for exports to Spain ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Greece (X%), while the prices for the other major destinations experienced more modest paces of growth.
Hot-Rolled Steel Products Imports
Imports into Libya
In 2022, approx. X tons of flat-rolled products of iron or steel (not further worked than hot-rolled) were imported into Libya; with an increase of X% against the year before. In general, imports, however, saw a abrupt descent. The most prominent rate of growth was recorded in 2019 with an increase of X%. Over the period under review, imports reached the maximum at X tons in 2013; however, from 2014 to 2022, imports failed to regain momentum.
In value terms, hot-rolled steel products imports surged to $X in 2022. Overall, imports, however, recorded a perceptible descent. The pace of growth appeared the most rapid in 2019 when imports increased by X%. Over the period under review, imports reached the peak figure at $X in 2013; however, from 2014 to 2022, imports remained at a lower figure.
Imports by Country
Turkey (X tons), Italy (X tons) and Ukraine (X tons) were the main suppliers of hot-rolled steel products imports to Libya, with a combined X% share of total imports.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Turkey (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Turkey ($X), Italy ($X) and Ukraine ($X) constituted the largest hot-rolled steel products suppliers to Libya, with a combined X% share of total imports.
Turkey, with a CAGR of X%, recorded the highest growth rate of the value of imports, in terms of the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average hot-rolled steel products import price amounted to $X per ton, picking up by X% against the previous year. Over the period under review, import price indicated a notable expansion from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, hot-rolled steel products import price increased by X% against 2020 indices. The pace of growth appeared the most rapid in 2021 when the average import price increased by X% against the previous year. Over the period under review, average import prices reached the peak figure in 2022 and is expected to retain growth in years to come.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was the UK ($X per ton), while the price for Russia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the UK (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the hot-rolled steel products market in Libya. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103130 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, not in coils, simply hot-rolled, not clad, plated or coated, w ith patterns in relief directly due to the rolling process and products of a thickness < 4,75 mm, without patterns in relief
- Prodcom 24103150 - Flat-rolled products, of iron or non-alloy steel, of a width . .600 mm (excluding
- Prodcom 24103210 - Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > .150 mm but < .600 mm and a thickness of . 4 mm, not in coils, without patterns in relief, commonly
- Prodcom 24103230 - Flat-rolled products of iron or non-alloy steel, of a width < .600 mm, simply hot-rolled, not clad, plated or coated (excluding
- Prodcom 24103330 - Plates and sheets produced by cutting from hot-rolled wide strip of a width of .600 mm or more, of stainless steel
- Prodcom 24103340 - Plates and sheets produced on a reversing mill (quarto) of a width of .600 mm or more and wide flats, of stainless steel
- Prodcom 241033Z0 - Hot-rolled flat products in coil of a width . .600 mm, of stainless steel
- Prodcom 241034Z0 - Hot-rolled flat products in coil of a width < .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24103520 - Flat-rolled products of high-speed steel, of a width . .600 mm, h ot-rolled or cold-rolled
- Prodcom 24103530 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, not in coils (excluding organic coated products, p roducts of a thickness < 4,75 mm and products of high-
- Prodcom 24103540 - Flat-rolled products of alloy steel other than stainless, of a width . .600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excluding products of tool steel, high-speed steel or silicon-electrical steel)
- Prodcom 24103600 - Flat-rolled products of alloy steel other than stainless, of a width of < .600 mm, not further worked than hot-rolled (excluding products of high-speed steel or silicon-electrical steel)
Country coverage:
- Libya
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Libya
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the hot-rolled steel products market in Asia.
This report provides an in-depth analysis of the hot-rolled steel products market in the U.S..
This report provides an in-depth analysis of the hot-rolled steel products market in China.
This report provides an in-depth analysis of the hot-rolled steel products market in the EU.
This report provides an in-depth analysis of the global hot-rolled steel products market.
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market
- Hot-Rolled Silico-Manganese Steel Bar Market