Guatemala - Computing Machinery and Parts and Accessories Thereof - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingGuatemala: Computing Machinery Market 2024
Computing Machinery Market Size in Guatemala
In 2022, after three years of growth, there was decline in the Guatemalan computing machinery market, when its value decreased by X% to $X. The market value increased at an average annual rate of X% over the period from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded in certain years. As a result, consumption attained the peak level of $X, and then reduced slightly in the following year.
Computing Machinery Exports
Exports from Guatemala
In 2022, the amount of computing machinery and parts and accessories thereof exported from Guatemala fell to X units, dropping by X% on the previous year. Over the period under review, exports continue to indicate a pronounced decrease. The pace of growth was the most pronounced in 2021 with an increase of X%. Over the period under review, the exports reached the maximum at X units in 2015; however, from 2016 to 2022, the exports remained at a lower figure.
In value terms, computing machinery exports reduced slightly to $X in 2022. In general, exports, however, saw a measured increase. The pace of growth was the most pronounced in 2021 when exports increased by X%. As a result, the exports reached the peak of $X, and then dropped modestly in the following year.
Exports by Country
Honduras (X units), El Salvador (X units) and Belize (X units) were the main destinations of computing machinery exports from Guatemala, with a combined X% share of total exports. The United States, Ecuador, Jamaica, Costa Rica, Nicaragua, Ireland, Chile, Mexico, the Philippines and Cuba lagged somewhat behind, together accounting for a further X%.
From 2012 to 2021, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Ireland (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, Honduras ($X), El Salvador ($X) and Belize ($X) appeared to be the largest markets for computing machinery exported from Guatemala worldwide, together comprising X% of total exports. The United States, Ecuador, Costa Rica, Chile, Nicaragua, Jamaica, Ireland, Mexico, Cuba and the Philippines lagged somewhat behind, together comprising a further X%.
In terms of the main countries of destination, Jamaica, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2021, the average computing machinery export price amounted to $X per unit, with an increase of X% against the previous year. Over the period under review, export price indicated buoyant growth from 2012 to 2021: its price increased at an average annual rate of X% over the last nine-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, computing machinery export price increased by X% against 2019 indices. As a result, the export price reached the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was the United States ($X per unit), while the average price for exports to the Philippines ($X per unit) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to Jamaica (X%), while the prices for the other major destinations experienced more modest paces of growth.
Computing Machinery Imports
Imports into Guatemala
In 2022, imports of computing machinery and parts and accessories thereof into Guatemala dropped to X units, falling by X% on the previous year's figure. Overall, imports showed a relatively flat trend pattern. The growth pace was the most rapid in 2021 when imports increased by X% against the previous year. As a result, imports attained the peak of X units, and then fell in the following year.
In value terms, computing machinery imports amounted to $X in 2022. In general, total imports indicated a buoyant increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2016 indices. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Imports peaked in 2022 and are likely to see steady growth in the near future.
Imports by Country
In 2021, the United States (X units) constituted the largest supplier of computing machinery to Guatemala, accounting for a X% share of total imports. Moreover, computing machinery imports from the United States exceeded the figures recorded by the second-largest supplier, China (X units), threefold. The third position in this ranking was held by Panama (X units), with a X% share.
From 2012 to 2021, the average annual growth rate of volume from the United States amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and Panama (X% per year).
In value terms, the United States ($X), China ($X) and Panama ($X) were the largest computing machinery suppliers to Guatemala, together comprising X% of total imports.
In terms of the main suppliers, China, with a CAGR of X%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average computing machinery import price stood at $X per unit in 2021, surging by X% against the previous year. Over the last nine years, it increased at an average annual rate of X%. The pace of growth appeared the most rapid in 2020 when the average import price increased by X% against the previous year. Over the period under review, average import prices attained the peak figure in 2021 and is likely to see steady growth in the immediate term.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Mexico ($X per unit), while the price for Vietnam ($X per unit) was amongst the lowest.
From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Vietnam (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the computing machinery market in Guatemala. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 26201100 - Laptop PCs and palm-top organisers
- Prodcom 26201300 - Desk top PCs
- Prodcom 26201400 - Digital data processing machines: presented in the form of systems
- Prodcom 26201500 - Other digital automatic data processing machines whether or not containing in the same housing one or two of the following units: storage units, input/output units
- Prodcom 26201640 - Printers, copying machines and facsimile machines, capable of connecting to an automatic data processing machine or to a network (excluding printing machinery used for printing by means of plates, cylinders and other components, and
- Prodcom 26201650 - Keyboards
- Prodcom 26201660 - Other input or output units, whether or not containing storage units in the same housing
- Prodcom 26201700 - Monitors and projectors, principally used in an automatic data processing system
- Prodcom 26201800 - Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network
- Prodcom 26202100 - Storage units
- Prodcom 26203000 - Other units of automatic data processing machines (excluding network communications equipment (e.g. hubs, routers, g ateways) for LANs and WANs and sound, video, network and similar cards for automatic data processing machines)
- Prodcom 26204000 - Parts and accessories of the machines of HS
- Prodcom 28232600 - Parts and accessories of printers of HS
- Prodcom 26122000 - Network communications equipment (e.g. hubs, routers, g ateways) for LANs and WANs and sound, video, network and similar cards for automatic data processing machines
- Prodcom 269900Z0 - Other units of automatic data processing machines
Country coverage:
- Guatemala
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Guatemala
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the computing machinery market in Asia.
This report provides an in-depth analysis of the computing machinery market in the U.S..
This report provides an in-depth analysis of the computing machinery market in China.
This report provides an in-depth analysis of the computing machinery market in the EU.
This report provides an in-depth analysis of the global computing machinery market.