Europe - Grinding and Sharpening Metal Finishing Machines - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Market for Grinding And Sharpening Metal Finishing Machines 2024
Market Size for Grinding And Sharpening Metal Finishing Machines in Europe
In 2022, the Europe grinding and sharpening machine market decreased by X% to $X for the first time since 2017, thus ending a four-year rising trend. Overall, consumption, however, showed a resilient expansion. Over the period under review, the market hit record highs at $X in 2021, and then shrank in the following year.
Production of Grinding And Sharpening Metal Finishing Machines in Europe
In value terms, grinding and sharpening machine production rose slightly to $X in 2022 estimated in export price. The total production indicated moderate growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The most prominent rate of growth was recorded in 2019 when the production volume increased by X% against the previous year. Over the period under review, production hit record highs at $X in 2020; however, from 2021 to 2022, production remained at a lower figure.
Exports of Grinding And Sharpening Metal Finishing Machines
Exports in Europe
In 2022, overseas shipments of grinding and sharpening metal finishing machines increased by X% to X units for the first time since 2019, thus ending a two-year declining trend. Overall, exports recorded prominent growth. The most prominent rate of growth was recorded in 2018 when exports increased by X% against the previous year. Over the period under review, the exports reached the peak figure at X units in 2019; however, from 2020 to 2022, the exports stood at a somewhat lower figure.
In value terms, grinding and sharpening machine exports stood at $X in 2022. In general, exports, however, saw a deep setback. The pace of growth appeared the most rapid in 2021 when exports increased by X%. Over the period under review, the exports hit record highs at $X in 2012; however, from 2013 to 2022, the exports remained at a lower figure.
Exports by Country
In 2022, Germany (X units), distantly followed by Belgium (X units), Austria (X units), the Netherlands (X units), Spain (X units) and Sweden (X units) represented the main exporters of grinding and sharpening metal finishing machines, together comprising X% of total exports. The UK (X units) followed a long way behind the leaders.
From 2012 to 2022, average annual rates of growth with regard to grinding and sharpening machine exports from Germany stood at X%. At the same time, Belgium (X%), Spain (X%), Sweden (X%), Austria (X%), the Netherlands (X%) and the UK (X%) displayed positive paces of growth. Moreover, Belgium emerged as the fastest-growing exporter exported in Europe, with a CAGR of X% from 2012-2022. From 2012 to 2022, the share of Belgium, Spain, Austria and Sweden increased by X, X, X and X percentage points, respectively.
In value terms, Germany ($X) remains the largest grinding and sharpening machine supplier in Europe, comprising X% of total exports. The second position in the ranking was held by Spain ($X), with an X% share of total exports. It was followed by Austria, with a X% share.
From 2012 to 2022, the average annual growth rate of value in Germany amounted to X%. In the other countries, the average annual rates were as follows: Spain (X% per year) and Austria (X% per year).
Export Prices by Country
The export price in Europe stood at $X per unit in 2022, falling by X% against the previous year. In general, the export price showed a sharp curtailment. The pace of growth appeared the most rapid in 2021 an increase of X% against the previous year. The level of export peaked at $X per unit in 2012; however, from 2013 to 2022, the export prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Spain ($X per unit), while Belgium ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the other leaders experienced a decline in the export price figures.
Imports of Grinding And Sharpening Metal Finishing Machines
Imports in Europe
In 2022, overseas purchases of grinding and sharpening metal finishing machines decreased by X% to X units, falling for the second consecutive year after four years of growth. Over the period under review, imports, however, showed a buoyant increase. The pace of growth was the most pronounced in 2018 when imports increased by X% against the previous year. Over the period under review, imports reached the peak figure at X units in 2020; however, from 2021 to 2022, imports failed to regain momentum.
In value terms, grinding and sharpening machine imports contracted modestly to $X in 2022. Overall, imports saw a abrupt shrinkage. The most prominent rate of growth was recorded in 2021 when imports increased by X%. The level of import peaked at $X in 2014; however, from 2015 to 2022, imports remained at a lower figure.
Imports by Country
The countries with the highest levels of grinding and sharpening machine imports in 2022 were Germany (X units), the UK (X units), Spain (X units), the Netherlands (X units), Austria (X units), France (X units), Poland (X units), Belgium (X units) and Russia (X units), together accounting for X% of total import. Italy (X units), the Czech Republic (X units), Ukraine (X units) and Romania (X units) followed a long way behind the leaders.
From 2012 to 2022, the biggest increases were recorded for Belgium (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X), France ($X) and Italy ($X) constituted the countries with the highest levels of imports in 2022, together accounting for X% of total imports. Austria, Russia, Romania, Spain, the UK, Poland, the Czech Republic, the Netherlands, Belgium and Ukraine lagged somewhat behind, together comprising a further X%.
Among the main importing countries, Spain, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Europe stood at $X per unit in 2022, growing by X% against the previous year. In general, the import price, however, recorded a abrupt setback. The pace of growth appeared the most rapid in 2021 when the import price increased by X%. The level of import peaked at $X per unit in 2016; however, from 2017 to 2022, import prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Italy ($X per unit), while Belgium ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Italy (X%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for grinding and sharpening machine in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28412305 - Numerically controlled flat-surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm
- Prodcom 28412315 - Numerically controlled cylindrical surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm
- Prodcom 28412325 - Other numerically controlled grinding machines in which the positioning in any one axis can be set up to accuracy > 0,01 mm
- Prodcom 28412335 - Non-numerically controlled flat-surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm
- Prodcom 28412345 - Non-numerically controlled cylindrical surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm
- Prodcom 28412355 - Grinding machines for working metal, any one axis can be set to an accuracy . 0,01 mm excluding flat-surface grinding machines, cylindrical surface grinding machines
- Prodcom 28412365 - Numerically controlled sharpening (tool or cutter grinding) m achines for working metal
- Prodcom 28412375 - Non-numerically controlled sharpening (tool or cutter grinding) machines for working metal
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- North Macedonia
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for grinding and sharpening machine in Asia.
This report provides an in-depth analysis of the market for grinding and sharpening machine in the U.S..
This report provides an in-depth analysis of the market for grinding and sharpening machine in China.
This report provides an in-depth analysis of the market for grinding and sharpening machine in the EU.
This report provides an in-depth analysis of the global market for grinding and sharpening machine.