EU - Acrylic Polymers, in Primary Forms (excluding Polymethyl Methacrylate) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEU: Market for Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate) 2024
Market Size for Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate) in the EU
In 2023, the EU market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) increased by X% to $X, rising for the third consecutive year after three years of decline. The market value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. Over the period under review, the market attained the peak level in 2023 and is expected to retain growth in the near future.
Production of Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate) in the EU
In value terms, production of acrylic polymers, in primary forms (excluding polymethyl methacrylate) declined to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2021 with an increase of X%. Over the period under review, production of hit record highs at $X in 2022, and then fell in the following year.
Exports of Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate)
Exports in the EU
In 2023, overseas shipments of acrylic polymers, in primary forms (excluding polymethyl methacrylate) decreased by X% to X tons, falling for the second consecutive year after three years of growth. In general, exports, however, showed a relatively flat trend pattern. The growth pace was the most rapid in 2020 with an increase of X% against the previous year. The volume of export peaked at X tons in 2021; however, from 2022 to 2023, the exports stood at a somewhat lower figure.
In value terms, exports of acrylic polymers, in primary forms (excluding polymethyl methacrylate) dropped to $X in 2023. Over the period under review, exports, however, showed mild growth. The growth pace was the most rapid in 2020 with an increase of X% against the previous year. The level of export peaked at $X in 2022, and then contracted in the following year.
Exports by Country
The biggest shipments were from Germany (X tons), France (X tons) and Belgium (X tons), together finishing at X% of total export. The Netherlands (X tons) took the next position in the ranking, followed by Italy (X tons) and Spain (X tons). All these countries together took approx. X% share of total exports. Sweden (X tons) followed a long way behind the leaders.
From 2012 to 2023, the most notable rate of growth in terms of shipments, amongst the key exporting countries, was attained by Spain (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, the largest acrylic polymers, in primary forms (excluding polymethyl methacrylate) supplying countries in the European Union were Germany ($X), France ($X) and Belgium ($X), with a combined X% share of total exports. The Netherlands, Italy, Spain and Sweden lagged somewhat behind, together comprising a further X%.
In terms of the main exporting countries, Italy, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The export price in the European Union stood at $X per ton in 2023, with an increase of X% against the previous year. Over the period under review, the export price showed a relatively flat trend pattern. The pace of growth appeared the most rapid in 2021 an increase of X%. The level of export peaked in 2023 and is expected to retain growth in the near future.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Sweden ($X per ton), while Italy ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Sweden (X%), while the other leaders experienced more modest paces of growth.
Imports of Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate)
Imports in the EU
In 2023, overseas purchases of acrylic polymers, in primary forms (excluding polymethyl methacrylate) decreased by X% to X tons, falling for the second year in a row after four years of growth. The total import volume increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2021 when imports increased by X%. As a result, imports attained the peak of X tons. From 2022 to 2023, the growth of imports of failed to regain momentum.
In value terms, imports of acrylic polymers, in primary forms (excluding polymethyl methacrylate) contracted to $X in 2023. Total imports indicated notable growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2018 indices. The growth pace was the most rapid in 2021 with an increase of X% against the previous year. Over the period under review, imports of attained the maximum at $X in 2022, and then dropped in the following year.
Imports by Country
In 2023, Germany (X tons), Italy (X tons), Poland (X tons), France (X tons), Belgium (X tons), the Netherlands (X tons), Spain (X tons), the Czech Republic (X tons) and Sweden (X tons) was the main importer of acrylic polymers, in primary forms (excluding polymethyl methacrylate) in the European Union, mixing up X% of total import.
From 2012 to 2023, the biggest increases were recorded for the Czech Republic (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X), Italy ($X) and Poland ($X) were the countries with the highest levels of imports in 2023, with a combined X% share of total imports. Belgium, France, the Netherlands, Spain, the Czech Republic and Sweden lagged somewhat behind, together accounting for a further X%.
The Czech Republic, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, in terms of the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2023, the import price in the European Union amounted to $X per ton, growing by X% against the previous year. Overall, the import price showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 an increase of X%. Over the period under review, import prices hit record highs in 2023 and is likely to continue growth in the near future.
Average prices varied somewhat amongst the major importing countries. In 2023, major importing countries recorded the following prices: in Belgium ($X per ton) and Germany ($X per ton), while Poland ($X per ton) and the Czech Republic ($X per ton) were amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Belgium (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 20165390 - Acrylic polymers, in primary forms (excluding polymethyl methacrylate)
Country coverage:
- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in the EU, split by region and country
- Trade (exports and imports) in the EU
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in Asia.
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in the U.S..
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in China.
This report provides an in-depth analysis of the global market for acrylic polymers, in primary forms (excluding polymethyl methacrylate).