ECOWAS - Taps, Cocks, Valves and Similar Appliances - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingECOWAS: Tap And Valve Market 2024
Tap And Valve Exports
Exports in ECOWAS
Tap and valve exports contracted notably to X tons in 2022, declining by X% against the previous year. Overall, exports continue to indicate a noticeable decrease. The growth pace was the most rapid in 2018 when exports increased by X%. The volume of export peaked at X tons in 2014; however, from 2015 to 2022, the exports remained at a lower figure.
In value terms, tap and valve exports declined slightly to $X in 2022. Over the period under review, exports recorded a mild shrinkage. The most prominent rate of growth was recorded in 2013 with an increase of X%. The level of export peaked at $X in 2014; however, from 2015 to 2022, the exports remained at a lower figure.
Exports by Country
Ghana (X tons), Cote d'Ivoire (X tons) and Senegal (X tons) represented roughly X% of total exports in 2022. Nigeria (X tons) ranks next in terms of the total exports with a X% share, followed by Mali (X%) and Sierra Leone (X%). Liberia (X tons) followed a long way behind the leaders.
From 2012 to 2022, the biggest increases were recorded for Cote d'Ivoire (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest tap and valve supplying countries in ECOWAS were Cote d'Ivoire ($X), Ghana ($X) and Senegal ($X), with a combined X% share of total exports.
Among the main exporting countries, Cote d'Ivoire, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced mixed trends in the exports figures.
Export Prices by Country
The export price in ECOWAS stood at $X per ton in 2022, growing by X% against the previous year. Overall, the export price posted noticeable growth. The pace of growth was the most pronounced in 2013 when the export price increased by X% against the previous year. As a result, the export price reached the peak level of $X per ton. From 2014 to 2022, the export prices remained at a somewhat lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Cote d'Ivoire ($X per ton), while Liberia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Senegal (X%), while the other leaders experienced more modest paces of growth.
Tap And Valve Imports
Imports in ECOWAS
For the eighth year in a row, ECOWAS recorded growth in purchases abroad of taps, cocks, valves and similar appliances, which increased by X% to X tons in 2022. In general, imports continue to indicate a significant increase. The most prominent rate of growth was recorded in 2020 when imports increased by X% against the previous year. The volume of import peaked in 2022 and is likely to see steady growth in the near future.
In value terms, tap and valve imports skyrocketed to $X in 2022. Overall, imports recorded a strong increase. The pace of growth appeared the most rapid in 2020 with an increase of X%. Over the period under review, imports hit record highs in 2022 and are expected to retain growth in the near future.
Imports by Country
Nigeria dominates imports structure, finishing at X tons, which was near X% of total imports in 2022. The following importers - Cote d'Ivoire (X tons), Senegal (X tons) and Ghana (X tons) - together made up X% of total imports.
Nigeria was also the fastest-growing in terms of the taps, cocks, valves and similar appliances imports, with a CAGR of X% from 2012 to 2022. At the same time, Cote d'Ivoire (X%), Senegal (X%) and Ghana (X%) displayed positive paces of growth. While the share of Nigeria (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of Senegal (X p.p.), Cote d'Ivoire (X p.p.) and Ghana (X p.p.) displayed negative dynamics.
In value terms, Nigeria ($X) constitutes the largest market for imported taps, cocks, valves and similar appliances in ECOWAS, comprising X% of total imports. The second position in the ranking was held by Senegal ($X), with a X% share of total imports. It was followed by Ghana, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value in Nigeria amounted to X%. The remaining importing countries recorded the following average annual rates of imports growth: Senegal (X% per year) and Ghana (X% per year).
Import Prices by Country
In 2022, the import price in ECOWAS amounted to $X per ton, picking up by X% against the previous year. Overall, the import price, however, showed a deep slump. The growth pace was the most rapid in 2014 an increase of X% against the previous year. Over the period under review, import prices reached the maximum at $X per ton in 2015; however, from 2016 to 2022, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Ghana ($X per ton), while Nigeria ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Senegal (X%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the tap and valve market in ECOWAS. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28121420 - Pneumatic filters, regulators and lubricators
- Prodcom 28121450 - Valves for the control of oleohydraulic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28121480 - Valves for the control of pneumatic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141120 - Pressure-reducing valves of cast iron or steel, for pipes, b oiler shells, tanks, vats and the like (excluding those combined with lubricators or filters)
- Prodcom 28141140 - Pressure-reducing valves for pipes, boiler shells, tanks, vats and the like (excluding of cast iron or steel, those combined with filters or lubricators)
- Prodcom 28141160 - Check valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141170 - Valves for pneumatic tyres and inner-tubes
- Prodcom 28141180 - Safety or relief valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141233 - Mixing valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check valves, s afety/relief valves
- Prodcom 28141235 - Taps, cocks and valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressurereducing/ oleohydraulic transmissions, check, safety, relief and mixing valves
- Prodcom 28141253 - Central heating radiator thermostatic valves
- Prodcom 28141255 - Central heating radiator valves, other
- Prodcom 28141313 - Other process control valves, temperature regulators
- Prodcom 28141315 - Process control valves for pipes, boiler shells, tanks etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check, s afety/relief valves, temp. regulators
- Prodcom 28141333 - Other gate valves, of cast iron
- Prodcom 28141335 - Other gate valves, of steel
- Prodcom 28141337 - Other gate valves, other
- Prodcom 28141353 - Globe valves, of cast iron
- Prodcom 28141355 - Globe valves, of steel
- Prodcom 28141357 - Other globe valves
- Prodcom 28141373 - Ball and plug valves
- Prodcom 28141375 - Butterfly valves
- Prodcom 28141377 - Diaphragm valves
- Prodcom 28141380 - Other appliances
Country coverage:
- Benin
- Burkina Faso
- Cabo Verde
- Cote d'Ivoire
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Liberia
- Mali
- Niger
- Nigeria
- Senegal
- Sierra Leone
- Togo
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in ECOWAS, split by region and country
- Trade (exports and imports) in ECOWAS
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Benin
- Burkina Faso
- Cabo Verde
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Liberia
- Mali
- Niger
- Nigeria
- Senegal
- Sierra Leone
- Togo
- Cote d'Ivoire
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the tap and valve market in Asia.
This report provides an in-depth analysis of the tap and valve market in the U.S..
This report provides an in-depth analysis of the tap and valve market in China.
This report provides an in-depth analysis of the tap and valve market in the EU.
This report provides an in-depth analysis of the global tap and valve market.