Cote d'Ivoire - Flat-Rolled Products of Iron or Steel (Not Further Worked Than Hot-Rolled) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCote d'Ivoire: Hot-Rolled Steel Products Market 2024
Hot-Rolled Steel Products Market Size in Cote d'Ivoire
The Cote d'Ivoire's hot-rolled steel products market skyrocketed to $X in 2022, jumping by X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). In general, consumption posted prominent growth. Over the period under review, the market hit record highs in 2022 and is expected to retain growth in years to come.
Hot-Rolled Steel Products Exports
Exports from Cote d'Ivoire
After three years of growth, overseas shipments of flat-rolled products of iron or steel (not further worked than hot-rolled) decreased by X% to X tons in 2022. Over the period under review, exports, however, saw a moderate increase. The pace of growth was the most pronounced in 2015 when exports increased by X% against the previous year. As a result, the exports attained the peak of X tons. From 2016 to 2022, the growth of the exports failed to regain momentum.
In value terms, hot-rolled steel products exports declined rapidly to $X in 2022. Overall, exports saw a slight shrinkage. The pace of growth appeared the most rapid in 2015 when exports increased by X%. Over the period under review, the exports hit record highs at $X in 2021, and then fell remarkably in the following year.
Exports by Country
Burkina Faso (X tons) was the main destination for hot-rolled steel products exports from Cote d'Ivoire, accounting for a X% share of total exports. Moreover, hot-rolled steel products exports to Burkina Faso exceeded the volume sent to the second major destination, Liberia (X tons), fivefold. The third position in this ranking was taken by Benin (X tons), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume to Burkina Faso amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Liberia (X% per year) and Benin (X% per year).
In value terms, Burkina Faso ($X) emerged as the key foreign market for flat-rolled products of iron or steel (not further worked than hot-rolled) exports from Cote d'Ivoire, comprising X% of total exports. The second position in the ranking was taken by Benin ($X), with a X% share of total exports. It was followed by Liberia, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value to Burkina Faso totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Benin (X% per year) and Liberia (X% per year).
Export Prices by Country
In 2022, the average hot-rolled steel products export price amounted to $X per ton, which is down by X% against the previous year. In general, the export price saw a perceptible downturn. The growth pace was the most rapid in 2018 an increase of X%. The export price peaked at $X per ton in 2012; however, from 2013 to 2022, the export prices remained at a lower figure.
There were significant differences in the average prices for the major foreign markets. In 2022, amid the top suppliers, the country with the highest price was Benin ($X per ton), while the average price for exports to Liberia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Mali (X%), while the prices for the other major destinations experienced mixed trend patterns.
Hot-Rolled Steel Products Imports
Imports into Cote d'Ivoire
In 2022, imports of flat-rolled products of iron or steel (not further worked than hot-rolled) into Cote d'Ivoire rose rapidly to X tons, surging by X% against 2021. Over the period under review, total imports indicated buoyant growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports decreased by X% against 2020 indices. The pace of growth was the most pronounced in 2020 when imports increased by X% against the previous year. As a result, imports reached the peak of X tons. From 2021 to 2022, the growth of imports remained at a lower figure.
In value terms, hot-rolled steel products imports soared to $X in 2022. Overall, imports posted a prominent increase. The growth pace was the most rapid in 2020 with an increase of X%. Imports peaked in 2022 and are likely to see gradual growth in years to come.
Imports by Country
In 2022, China (X tons) constituted the largest hot-rolled steel products supplier to Cote d'Ivoire, with a X% share of total imports. Moreover, hot-rolled steel products imports from China exceeded the figures recorded by the second-largest supplier, Ukraine (X tons), sixfold. The third position in this ranking was held by Turkey (X tons), with an X% share.
From 2012 to 2022, the average annual growth rate of volume from China totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: Ukraine (X% per year) and Turkey (X% per year).
In value terms, China ($X) constituted the largest supplier of flat-rolled products of iron or steel (not further worked than hot-rolled) to Cote d'Ivoire, comprising X% of total imports. The second position in the ranking was held by Ukraine ($X), with an X% share of total imports. It was followed by Turkey, with an X% share.
From 2012 to 2022, the average annual rate of growth in terms of value from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Ukraine (X% per year) and Turkey (X% per year).
Import Prices by Country
In 2022, the average hot-rolled steel products import price amounted to $X per ton, growing by X% against the previous year. Overall, import price indicated a notable increase from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, hot-rolled steel products import price increased by X% against 2016 indices. The growth pace was the most rapid in 2021 when the average import price increased by X%. The import price peaked in 2022 and is expected to retain growth in the immediate term.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was South Africa ($X per ton), while the price for Ukraine ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by South Africa (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the hot-rolled steel products market in Cote d'Ivoire. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103130 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, not in coils, simply hot-rolled, not clad, plated or coated, w ith patterns in relief directly due to the rolling process and products of a thickness < 4,75 mm, without patterns in relief
- Prodcom 24103150 - Flat-rolled products, of iron or non-alloy steel, of a width . .600 mm (excluding
- Prodcom 24103210 - Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > .150 mm but < .600 mm and a thickness of . 4 mm, not in coils, without patterns in relief, commonly
- Prodcom 24103230 - Flat-rolled products of iron or non-alloy steel, of a width < .600 mm, simply hot-rolled, not clad, plated or coated (excluding
- Prodcom 24103330 - Plates and sheets produced by cutting from hot-rolled wide strip of a width of .600 mm or more, of stainless steel
- Prodcom 24103340 - Plates and sheets produced on a reversing mill (quarto) of a width of .600 mm or more and wide flats, of stainless steel
- Prodcom 241033Z0 - Hot-rolled flat products in coil of a width . .600 mm, of stainless steel
- Prodcom 241034Z0 - Hot-rolled flat products in coil of a width < .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24103520 - Flat-rolled products of high-speed steel, of a width . .600 mm, h ot-rolled or cold-rolled
- Prodcom 24103530 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, not in coils (excluding organic coated products, p roducts of a thickness < 4,75 mm and products of high-
- Prodcom 24103540 - Flat-rolled products of alloy steel other than stainless, of a width . .600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excluding products of tool steel, high-speed steel or silicon-electrical steel)
- Prodcom 24103600 - Flat-rolled products of alloy steel other than stainless, of a width of < .600 mm, not further worked than hot-rolled (excluding products of high-speed steel or silicon-electrical steel)
Country coverage:
- Cote d'Ivoire
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Cote d'Ivoire
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the hot-rolled steel products market in Asia.
This report provides an in-depth analysis of the hot-rolled steel products market in the U.S..
This report provides an in-depth analysis of the hot-rolled steel products market in China.
This report provides an in-depth analysis of the hot-rolled steel products market in the EU.
This report provides an in-depth analysis of the global hot-rolled steel products market.
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market
- Hot-Rolled Silico-Manganese Steel Bar Market