Costa Rica - Spools, Cops and Similar Supports of Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCosta Rica: Plastic Support Market 2024
Plastic Support Market Size in Costa Rica
The Costa Rican plastic support market expanded modestly to $X in 2022, picking up by X% against the previous year. In general, the total consumption indicated moderate growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2020 indices. Plastic support consumption peaked at $X in 2020; however, from 2021 to 2022, consumption failed to regain momentum.
Plastic Support Production in Costa Rica
In value terms, plastic support production stood at $X in 2022 estimated in export price. Overall, the total production indicated a modest increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The pace of growth appeared the most rapid in 2018 with an increase of X% against the previous year. Over the period under review, production reached the peak level at $X in 2014; however, from 2015 to 2022, production remained at a lower figure.
Plastic Support Exports
Exports from Costa Rica
In 2022, approx. X tons of spools, cops and similar supports of plastics were exported from Costa Rica; falling by X% on 2021 figures. Over the period under review, exports showed a mild reduction. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. The exports peaked at X tons in 2013; however, from 2014 to 2022, the exports failed to regain momentum.
In value terms, plastic support exports contracted markedly to $X in 2022. In general, exports, however, recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 with an increase of X%. As a result, the exports reached the peak of $X, and then dropped sharply in the following year.
Exports by Country
Honduras (X tons) was the main destination for plastic support exports from Costa Rica, accounting for a X% share of total exports. Moreover, plastic support exports to Honduras exceeded the volume sent to the second major destination, Jamaica (X tons), twofold. The third position in this ranking was held by the United States (X tons), with an X% share.
From 2012 to 2022, the average annual growth rate of volume to Honduras was relatively modest. Exports to the other major destinations recorded the following average annual rates of exports growth: Jamaica (X% per year) and the United States (X% per year).
In value terms, Honduras ($X), Jamaica ($X) and the Dominican Republic ($X) were the largest markets for plastic support exported from Costa Rica worldwide, with a combined X% share of total exports. The United States, El Salvador, Trinidad and Tobago, Guatemala, Panama, Nicaragua and Haiti lagged somewhat behind, together comprising a further X%.
Among the main countries of destination, Haiti, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2022, the average plastic support export price amounted to $X per ton, picking up by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2021 when the average export price increased by X%. The export price peaked in 2022 and is likely to see steady growth in the immediate term.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Nicaragua ($X per ton), while the average price for exports to Haiti ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Taiwan (Chinese) (X%), while the prices for the other major destinations experienced more modest paces of growth.
Plastic Support Imports
Imports into Costa Rica
In 2022, after two years of growth, there was significant decline in overseas purchases of spools, cops and similar supports of plastics, when their volume decreased by X% to X tons. In general, total imports indicated prominent growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2019 indices. The growth pace was the most rapid in 2020 with an increase of X% against the previous year. Over the period under review, imports hit record highs at X tons in 2021, and then fell in the following year.
In value terms, plastic support imports amounted to $X in 2022. Over the period under review, total imports indicated strong growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2019 indices. The growth pace was the most rapid in 2020 when imports increased by X% against the previous year. Imports peaked in 2022 and are likely to continue growth in the near future.
Imports by Country
The United States (X tons), Guatemala (X tons) and Mexico (X tons) were the main suppliers of plastic support imports to Costa Rica, together accounting for X% of total imports. Colombia, China, Hungary, the Dominican Republic, El Salvador, Honduras, Canada and Italy lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the biggest increases were recorded for the Dominican Republic (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest plastic support suppliers to Costa Rica were the United States ($X), Mexico ($X) and Guatemala ($X), with a combined X% share of total imports. Colombia, China, Hungary, El Salvador, the Dominican Republic, Honduras, Italy and Canada lagged somewhat behind, together accounting for a further X%.
The Dominican Republic, with a CAGR of X%, recorded the highest growth rate of the value of imports, among the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average plastic support import price amounted to $X per ton, growing by X% against the previous year. Over the last decade, it increased at an average annual rate of X%. As a result, import price attained the peak level and is likely to continue growth in the immediate term.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Italy ($X per ton), while the price for Guatemala ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Honduras (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the plastic support market in Costa Rica. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22221910 - Spools, cops, bobbins and similar supports, of plastics
- Prodcom 22221920 - Plastic caps and capsules for bottles
- Prodcom 22221930 - Plastic stoppers, lids, caps and other closures (excluding for bottles)
Country coverage:
- Costa Rica
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Costa Rica
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the plastic support market in Asia.
This report provides an in-depth analysis of the plastic support market in the U.S..
This report provides an in-depth analysis of the plastic support market in China.
This report provides an in-depth analysis of the plastic support market in the EU.
This report provides an in-depth analysis of the global plastic support market.