CIS - Plastic Plates, Sheets, Film, Foil and Strip - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCIS: Market for Plastic Plates, Sheets, Film, Foil And Strip 2024
Market Size for Plastic Plates, Sheets, Film, Foil And Strip in CIS
The CIS market for plastic plates, sheets, film, foil and strip reached $X in 2022, with an increase of X% against the previous year. Over the period under review, consumption, however, continues to indicate a relatively flat trend pattern. Over the period under review, the market reached the peak level at $X in 2013; however, from 2014 to 2022, consumption failed to regain momentum.
Production of Plastic Plates, Sheets, Film, Foil And Strip in CIS
In value terms, production of plastic plates, sheets, film, foil and strip expanded slightly to $X in 2022 estimated in export price. In general, production, however, continues to indicate a mild slump. The most prominent rate of growth was recorded in 2020 when the production volume increased by X%. Over the period under review, production of attained the maximum level at $X in 2012; however, from 2013 to 2022, production remained at a lower figure.
Exports of Plastic Plates, Sheets, Film, Foil And Strip
Exports in CIS
After ten years of growth, shipments abroad of plastic plates, sheets, film, foil and strip decreased by X% to X tons in 2022. Overall, exports, however, showed a temperate increase. The most prominent rate of growth was recorded in 2017 with an increase of X% against the previous year. Over the period under review, the exports of reached the maximum at X tons in 2021, and then plummeted in the following year.
In value terms, exports of plastic plates, sheets, film, foil and strip fell dramatically to $X in 2022. Over the period under review, exports, however, enjoyed a moderate increase. The pace of growth was the most pronounced in 2017 with an increase of X%. Over the period under review, the exports of attained the maximum at $X in 2021, and then fell dramatically in the following year.
Exports by Country
Russia was the major exporter of plastic plates, sheets, film, foil and strip in the CIS, with the volume of exports finishing at X tons, which was near X% of total exports in 2022. It was distantly followed by Belarus (X tons), committing a X% share of total exports. The following exporters - Uzbekistan (X tons) and Kazakhstan (X tons) - each recorded a X% share of total exports.
From 2012 to 2022, average annual rates of growth with regard to plastic plate, sheet, film, foil and strip exports from Russia stood at X%. At the same time, Uzbekistan (X%) and Kazakhstan (X%) displayed positive paces of growth. Moreover, Uzbekistan emerged as the fastest-growing exporter exported in the CIS, with a CAGR of X% from 2012-2022. By contrast, Belarus (X%) illustrated a downward trend over the same period. While the share of Russia (X p.p.), Uzbekistan (X p.p.) and Kazakhstan (X p.p.) increased significantly in terms of the total exports from 2012-2022, the share of Belarus (X p.p.) displayed negative dynamics.
In value terms, Russia ($X) remains the largest plastic plate, sheet, film, foil and strip supplier in the CIS, comprising X% of total exports. The second position in the ranking was held by Belarus ($X), with a X% share of total exports. It was followed by Kazakhstan, with a X% share.
In Russia, exports of plastic plates, sheets, film, foil and strip increased at an average annual rate of X% over the period from 2012-2022. The remaining exporting countries recorded the following average annual rates of exports growth: Belarus (X% per year) and Kazakhstan (X% per year).
Export Prices by Country
In 2022, the export price in the CIS amounted to $X per ton, increasing by X% against the previous year. Overall, the export price, however, saw a slight curtailment. The pace of growth was the most pronounced in 2021 an increase of X% against the previous year. The level of export peaked at $X per ton in 2013; however, from 2014 to 2022, the export prices stood at a somewhat lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Belarus ($X per ton), while Uzbekistan ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Belarus (X%), while the other leaders experienced a decline in the export price figures.
Imports of Plastic Plates, Sheets, Film, Foil And Strip
Imports in CIS
In 2022, approx. X tons of plastic plates, sheets, film, foil and strip were imported in the CIS; waning by X% compared with the year before. Total imports indicated a tangible increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2017 when imports increased by X%. Over the period under review, imports of hit record highs at X tons in 2021, and then declined sharply in the following year.
In value terms, imports of plastic plates, sheets, film, foil and strip fell significantly to $X in 2022. Total imports indicated a mild increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2017 when imports increased by X%. Over the period under review, imports of reached the peak figure at $X in 2021, and then dropped rapidly in the following year.
Imports by Country
In 2022, Russia (X tons) was the key importer of plastic plates, sheets, film, foil and strip, making up X% of total imports. It was distantly followed by Kazakhstan (X tons), Belarus (X tons) and Uzbekistan (X tons), together constituting a X% share of total imports. Azerbaijan (X tons), Moldova (X tons) and Tajikistan (X tons) followed a long way behind the leaders.
Russia experienced a relatively flat trend pattern with regard to volume of imports of plastic plates, sheets, film, foil and strip. At the same time, Uzbekistan (X%), Tajikistan (X%), Kazakhstan (X%), Azerbaijan (X%) and Moldova (X%) displayed positive paces of growth. Moreover, Uzbekistan emerged as the fastest-growing importer imported in the CIS, with a CAGR of X% from 2012-2022. Belarus experienced a relatively flat trend pattern. From 2012 to 2022, the share of Uzbekistan, Kazakhstan, Tajikistan and Azerbaijan increased by X, X, X and X percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Russia ($X) constitutes the largest market for imported plastic plates, sheets, film, foil and strip in the CIS, comprising X% of total imports. The second position in the ranking was held by Belarus ($X), with a X% share of total imports. It was followed by Kazakhstan, with an X% share.
From 2012 to 2022, the average annual growth rate of value in Russia was relatively modest. The remaining importing countries recorded the following average annual rates of imports growth: Belarus (X% per year) and Kazakhstan (X% per year).
Import Prices by Country
The import price in the CIS stood at $X per ton in 2022, increasing by X% against the previous year. Overall, the import price, however, saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2021 an increase of X%. The level of import peaked at $X per ton in 2013; however, from 2014 to 2022, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Russia ($X per ton), while Tajikistan ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Azerbaijan (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in CIS. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22213010 - Other plates..., of polymers of ethylene, not reinforced, t hickness . 0,125 mm
- Prodcom 22213017 - Other plates..., of polymers of ethylene, not reinforced, etc., t hickness > 0,125 mm
- Prodcom 22213021 - Other plates..., of biaxially orientated polymers of propylene, t hickness . 0,10 mm
- Prodcom 22213023 - Other plates..., of polymers of propylene, thickness . 0,10 mm, others
- Prodcom 22213026 - Strip of polymers of propylene, of a thickness of > 0,10 mm and a width of > 5 mm but . .20 mm, of the kind used for packaging (excluding self-adhesive products)
- Prodcom 22213030 - Other plates..., of polymers of styrene, not reinforced, etc.
- Prodcom 22213035 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213036 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213037 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213038 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213053 - Plates..., of polymethyl methacrylate, not reinforced, etc.
- Prodcom 22213059 - Plates..., of other acrylic polymers, not reinforced, etc., n.e.c.
- Prodcom 22213061 - Plates, sheets, film, foil, strip of polycarbonates, non-cellular excluding floor, wall, ceiling coverings - self-adhesive, r einforced, laminated, supported/similarly combined with other materials
- Prodcom 22213063 - Plates..., of unsaturated polyesters, not reinforced, etc.
- Prodcom 22213065 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness . 0,35 mm
- Prodcom 22213067 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness > 0,35 mm
- Prodcom 22213069 - Plates, sheets, film, foil, strip of polyesters, non-cellular excluding floor, wall, ceiling coverings, self-adhesive - of polycarbonates, polyethylene terephthalate, unsaturated polyesters
- Prodcom 22213070 - Plates, sheets, film, foil and strip, of non-cellular cellulose or its chemical derivatives, not reinforced, laminated, supported or similarly combined with other materials (excluding selfadhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213082 - Plates, sheets, film, foil, strip of polyamides, non-cellular (excluding floor, wall, ceiling coverings, self-adhesive, r einforced, laminated, supported/similarly combined with other materials)
- Prodcom 22213086 - Plates, sheets, film, foil and strip, of non-cellular poly(vinyl butyral), amino-resins, phenolic resins or polymerisation products, not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213090 - Plates, sheets, film, foil and strip, of non-cellular plastics, n .e.c., not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products, floor, wall and ceiling coverings of HS
Country coverage:
- Armenia
- Azerbaijan
- Belarus
- Kazakhstan
- Kyrgyzstan
- Moldova
- Russia
- Tajikistan
- Uzbekistan
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in CIS, split by region and country
- Trade (exports and imports) in CIS
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Armenia
- Azerbaijan
- Belarus
- Kazakhstan
- Kyrgyzstan
- Moldova
- Russia
- Tajikistan
- Uzbekistan
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Asia.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the U.S..
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in China.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the EU.
This report provides an in-depth analysis of the global market for plastic plate, sheet, film, foil and strip.