Central Asia - Taps, Cocks, Valves and Similar Appliances - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCentral Asia: Tap And Valve Market 2024
Tap And Valve Market Size in Central Asia
In 2022, the Central Asian tap and valve market was finally on the rise to reach $X for the first time since 2019, thus ending a two-year declining trend. Over the period under review, consumption, however, showed a relatively flat trend pattern. As a result, consumption attained the peak level of $X. From 2020 to 2022, the growth of the market failed to regain momentum.
Tap And Valve Production in Central Asia
In value terms, tap and valve production rose modestly to $X in 2022 estimated in export price. Overall, production, however, recorded a slight reduction. The most prominent rate of growth was recorded in 2014 when the production volume increased by X%. As a result, production attained the peak level of $X. From 2015 to 2022, production growth failed to regain momentum.
Tap And Valve Exports
Exports in Central Asia
In 2022, approx. X tons of taps, cocks, valves and similar appliances were exported in Central Asia; rising by X% against 2021 figures. Overall, exports recorded a relatively flat trend pattern. The growth pace was the most rapid in 2016 with an increase of X% against the previous year. The volume of export peaked at X tons in 2013; however, from 2014 to 2022, the exports remained at a lower figure.
In value terms, tap and valve exports soared to $X in 2022. Over the period under review, exports enjoyed a temperate expansion. As a result, the exports attained the peak and are likely to continue growth in the immediate term.
Exports by Country
In 2022, Kazakhstan (X tons) was the largest exporter of taps, cocks, valves and similar appliances, creating X% of total exports. Kyrgyzstan (X tons) held the second position in the ranking, followed by Uzbekistan (X tons). All these countries together took near X% share of total exports.
Exports from Kazakhstan decreased at an average annual rate of X% from 2012 to 2022. At the same time, Uzbekistan (X%) and Kyrgyzstan (X%) displayed positive paces of growth. Moreover, Uzbekistan emerged as the fastest-growing exporter exported in Central Asia, with a CAGR of X% from 2012-2022. From 2012 to 2022, the share of Kyrgyzstan and Uzbekistan increased by X and X percentage points, respectively.
In value terms, Kazakhstan ($X) remains the largest tap and valve supplier in Central Asia, comprising X% of total exports. The second position in the ranking was taken by Uzbekistan ($X), with a X% share of total exports.
In Kazakhstan, tap and valve exports increased at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Uzbekistan (X% per year) and Kyrgyzstan (X% per year).
Export Prices by Country
In 2022, the export price in Central Asia amounted to $X per ton, with an increase of X% against the previous year. Export price indicated a perceptible expansion from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, tap and valve export price decreased by X% against 2018 indices. The pace of growth appeared the most rapid in 2018 an increase of X% against the previous year. As a result, the export price reached the peak level of $X per ton. From 2019 to 2022, the export prices remained at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Kazakhstan ($X per ton), while Kyrgyzstan ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Uzbekistan (X%), while the other leaders experienced mixed trends in the export price figures.
Tap And Valve Imports
Imports in Central Asia
In 2022, tap and valve imports in Central Asia stood at X tons, remaining constant against the previous year. Total imports indicated mild growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports decreased by X% against 2019 indices. The pace of growth appeared the most rapid in 2019 when imports increased by X% against the previous year. As a result, imports attained the peak of X tons. From 2020 to 2022, the growth of imports remained at a lower figure.
In value terms, tap and valve imports contracted modestly to $X in 2022. Over the period under review, imports, however, saw a slight curtailment. The growth pace was the most rapid in 2019 with an increase of X% against the previous year. As a result, imports reached the peak of $X. From 2020 to 2022, the growth of imports remained at a somewhat lower figure.
Imports by Country
Kazakhstan was the main importer of taps, cocks, valves and similar appliances in Central Asia, with the volume of imports resulting at X tons, which was near X% of total imports in 2022. Uzbekistan (X tons) took a X% share (based on physical terms) of total imports, which put it in second place, followed by Turkmenistan (X%). The following importers - Kyrgyzstan (X tons) and Mongolia (X tons) - together made up X% of total imports.
From 2012 to 2022, the biggest increases were recorded for Uzbekistan (with a CAGR of X%), while purchases for the other leaders experienced mixed trends in the imports figures.
In value terms, Kazakhstan ($X) constitutes the largest market for imported taps, cocks, valves and similar appliances in Central Asia, comprising X% of total imports. The second position in the ranking was taken by Uzbekistan ($X), with a X% share of total imports. It was followed by Turkmenistan, with a X% share.
In Kazakhstan, tap and valve imports shrank by an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Uzbekistan (X% per year) and Turkmenistan (X% per year).
Import Prices by Country
The import price in Central Asia stood at $X per ton in 2022, reducing by X% against the previous year. In general, the import price showed a perceptible decrease. The pace of growth was the most pronounced in 2016 an increase of X% against the previous year. As a result, import price attained the peak level of $X per ton. From 2017 to 2022, the import prices remained at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Mongolia ($X per ton), while Uzbekistan ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Mongolia (X%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the tap and valve market in Central Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28121420 - Pneumatic filters, regulators and lubricators
- Prodcom 28121450 - Valves for the control of oleohydraulic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28121480 - Valves for the control of pneumatic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141120 - Pressure-reducing valves of cast iron or steel, for pipes, b oiler shells, tanks, vats and the like (excluding those combined with lubricators or filters)
- Prodcom 28141140 - Pressure-reducing valves for pipes, boiler shells, tanks, vats and the like (excluding of cast iron or steel, those combined with filters or lubricators)
- Prodcom 28141160 - Check valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141170 - Valves for pneumatic tyres and inner-tubes
- Prodcom 28141180 - Safety or relief valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141233 - Mixing valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check valves, s afety/relief valves
- Prodcom 28141235 - Taps, cocks and valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressurereducing/ oleohydraulic transmissions, check, safety, relief and mixing valves
- Prodcom 28141253 - Central heating radiator thermostatic valves
- Prodcom 28141255 - Central heating radiator valves, other
- Prodcom 28141313 - Other process control valves, temperature regulators
- Prodcom 28141315 - Process control valves for pipes, boiler shells, tanks etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check, s afety/relief valves, temp. regulators
- Prodcom 28141333 - Other gate valves, of cast iron
- Prodcom 28141335 - Other gate valves, of steel
- Prodcom 28141337 - Other gate valves, other
- Prodcom 28141353 - Globe valves, of cast iron
- Prodcom 28141355 - Globe valves, of steel
- Prodcom 28141357 - Other globe valves
- Prodcom 28141373 - Ball and plug valves
- Prodcom 28141375 - Butterfly valves
- Prodcom 28141377 - Diaphragm valves
- Prodcom 28141380 - Other appliances
Country coverage:
- Kazakhstan
- Kyrgyzstan
- Mongolia
- Tajikistan
- Turkmenistan
- Uzbekistan
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Central Asia, split by region and country
- Trade (exports and imports) in Central Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Kazakhstan
- Kyrgyzstan
- Mongolia
- Tajikistan
- Turkmenistan
- Uzbekistan
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the tap and valve market in Asia.
This report provides an in-depth analysis of the tap and valve market in the U.S..
This report provides an in-depth analysis of the tap and valve market in China.
This report provides an in-depth analysis of the tap and valve market in the EU.
This report provides an in-depth analysis of the global tap and valve market.