Cameroon - Taps, Cocks, Valves and Similar Appliances - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCameroon: Tap And Valve Market 2024
Tap And Valve Market Size in Cameroon
The Cameroonian tap and valve market fell to $X in 2022, reducing by X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, the total consumption indicated a strong increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by X% against 2018 indices. Tap and valve consumption peaked at $X in 2016; however, from 2017 to 2022, consumption failed to regain momentum.
Tap And Valve Exports
Exports from Cameroon
In 2022, approx. X tons of taps, cocks, valves and similar appliances were exported from Cameroon; waning by X% against the previous year. Over the period under review, exports saw a abrupt descent. The growth pace was the most rapid in 2019 when exports increased by X%. The exports peaked at X tons in 2012; however, from 2013 to 2022, the exports failed to regain momentum.
In value terms, tap and valve exports shrank remarkably to $X in 2022. Overall, exports recorded a abrupt shrinkage. The pace of growth appeared the most rapid in 2015 with an increase of X%. The exports peaked at $X in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
Exports by Country
Congo (X tons) was the main destination for tap and valve exports from Cameroon, with a X% share of total exports. Moreover, tap and valve exports to Congo exceeded the volume sent to the second major destination, Central African Republic (X tons), fourfold. The third position in this ranking was taken by the UK (X tons), with an X% share.
From 2012 to 2022, the average annual growth rate of volume to Congo amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Central African Republic (X% per year) and the UK (X% per year).
In value terms, Congo ($X) remains the key foreign market for taps, cocks, valves and similar appliances exports from Cameroon, comprising X% of total exports. The second position in the ranking was held by the UK ($X), with an X% share of total exports. It was followed by the Netherlands, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value to Congo amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the UK (X% per year) and the Netherlands (X% per year).
Export Prices by Country
The average tap and valve export price stood at $X per ton in 2022, falling by X% against the previous year. Over the period under review, the export price saw a pronounced downturn. The pace of growth appeared the most rapid in 2016 when the average export price increased by X% against the previous year. As a result, the export price attained the peak level of $X per ton. From 2017 to 2022, the average export prices failed to regain momentum.
There were significant differences in the average prices for the major foreign markets. In 2022, amid the top suppliers, the country with the highest price was the United States ($X per ton), while the average price for exports to Equatorial Guinea ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Mozambique (X.7%), while the prices for the other major destinations experienced more modest paces of growth.
Tap And Valve Imports
Imports into Cameroon
In 2022, imports of taps, cocks, valves and similar appliances into Cameroon dropped to X tons, with a decrease of X% compared with 2021 figures. Overall, imports, however, saw buoyant growth. The most prominent rate of growth was recorded in 2019 when imports increased by X% against the previous year. Imports peaked at X tons in 2016; however, from 2017 to 2022, imports failed to regain momentum.
In value terms, tap and valve imports reduced to $X in 2022. Over the period under review, total imports indicated a measured expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2018 indices. The pace of growth was the most pronounced in 2019 with an increase of X%. Imports peaked at $X in 2016; however, from 2017 to 2022, imports stood at a somewhat lower figure.
Imports by Country
In 2022, the United Arab Emirates (X tons) constituted the largest supplier of tap and valve to Cameroon, accounting for a X% share of total imports. Moreover, tap and valve imports from the United Arab Emirates exceeded the figures recorded by the second-largest supplier, China (X tons), sevenfold. The third position in this ranking was held by France (X tons), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume from the United Arab Emirates amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and France (X% per year).
In value terms, the United Arab Emirates ($X) constituted the largest supplier of taps, cocks, valves and similar appliances to Cameroon, comprising X% of total imports. The second position in the ranking was taken by the United States ($X), with a X% share of total imports. It was followed by France, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value from the United Arab Emirates totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: the United States (X% per year) and France (X% per year).
Import Prices by Country
The average tap and valve import price stood at $X per ton in 2022, waning by X% against the previous year. In general, the import price continues to indicate a perceptible setback. The pace of growth was the most pronounced in 2020 when the average import price increased by X%. The import price peaked at $X per ton in 2014; however, from 2015 to 2022, import prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was the United States ($X per ton), while the price for China ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the United Arab Emirates (X%), while the prices for the other major suppliers experienced mixed trend patterns.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the tap and valve market in Cameroon. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28121420 - Pneumatic filters, regulators and lubricators
- Prodcom 28121450 - Valves for the control of oleohydraulic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28121480 - Valves for the control of pneumatic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141120 - Pressure-reducing valves of cast iron or steel, for pipes, b oiler shells, tanks, vats and the like (excluding those combined with lubricators or filters)
- Prodcom 28141140 - Pressure-reducing valves for pipes, boiler shells, tanks, vats and the like (excluding of cast iron or steel, those combined with filters or lubricators)
- Prodcom 28141160 - Check valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141170 - Valves for pneumatic tyres and inner-tubes
- Prodcom 28141180 - Safety or relief valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141233 - Mixing valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check valves, s afety/relief valves
- Prodcom 28141235 - Taps, cocks and valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressurereducing/ oleohydraulic transmissions, check, safety, relief and mixing valves
- Prodcom 28141253 - Central heating radiator thermostatic valves
- Prodcom 28141255 - Central heating radiator valves, other
- Prodcom 28141313 - Other process control valves, temperature regulators
- Prodcom 28141315 - Process control valves for pipes, boiler shells, tanks etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check, s afety/relief valves, temp. regulators
- Prodcom 28141333 - Other gate valves, of cast iron
- Prodcom 28141335 - Other gate valves, of steel
- Prodcom 28141337 - Other gate valves, other
- Prodcom 28141353 - Globe valves, of cast iron
- Prodcom 28141355 - Globe valves, of steel
- Prodcom 28141357 - Other globe valves
- Prodcom 28141373 - Ball and plug valves
- Prodcom 28141375 - Butterfly valves
- Prodcom 28141377 - Diaphragm valves
- Prodcom 28141380 - Other appliances
Country coverage:
- Cameroon
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Cameroon
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the tap and valve market in Asia.
This report provides an in-depth analysis of the tap and valve market in the U.S..
This report provides an in-depth analysis of the tap and valve market in China.
This report provides an in-depth analysis of the tap and valve market in the EU.
This report provides an in-depth analysis of the global tap and valve market.