ASEAN - Padlocks, Locks and Keys of Base Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingASEAN: Lock And Key Market 2024
Lock And Key Market Size in ASEAN
The ASEAN lock and key market stood at $X in 2023, therefore, remained relatively stable against the previous year. The market value increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded in certain years. Over the period under review, the market hit record highs at $X in 2021; however, from 2022 to 2023, consumption failed to regain momentum.
Lock And Key Production in ASEAN
In value terms, lock and key production stood at $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2018 with an increase of X%. The level of production peaked at $X in 2019; however, from 2020 to 2023, production remained at a lower figure.
Lock And Key Exports
Exports in ASEAN
In 2023, shipments abroad of padlocks, locks and keys of base metal decreased by X% to X tons, falling for the second consecutive year after two years of growth. Total exports indicated a noticeable expansion from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports decreased by X% against 2021 indices. The pace of growth appeared the most rapid in 2021 with an increase of X%. As a result, the exports attained the peak of X tons. From 2022 to 2023, the growth of the exports remained at a somewhat lower figure.
In value terms, lock and key exports fell to $X in 2023. Total exports indicated a pronounced increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, the exports attained the maximum at $X in 2022, and then reduced in the following year.
Exports by Country
Malaysia (X tons) and Vietnam (X tons) represented roughly X% of total exports in 2023. Thailand (X tons) ranks next in terms of the total exports with a X% share, followed by the Philippines (X%) and Singapore (X%). Indonesia (X tons) followed a long way behind the leaders.
From 2012 to 2023, the biggest increases were recorded for Vietnam (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Vietnam ($X), Thailand ($X) and Malaysia ($X) constituted the countries with the highest levels of exports in 2023, together comprising X% of total exports.
Vietnam, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, among the main exporting countries over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The export price in ASEAN stood at $X per ton in 2023, shrinking by X% against the previous year. Over the period under review, the export price showed a relatively flat trend pattern. The pace of growth appeared the most rapid in 2018 when the export price increased by X%. The level of export peaked at $X per ton in 2019; however, from 2020 to 2023, the export prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Singapore ($X per ton), while Malaysia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the Philippines (X%), while the other leaders experienced more modest paces of growth.
Lock And Key Imports
Imports in ASEAN
In 2023, purchases abroad of padlocks, locks and keys of base metal increased by X% to X tons, rising for the third consecutive year after three years of decline. The total import volume increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2017 when imports increased by X%. The volume of import peaked in 2023 and is likely to see steady growth in the near future.
In value terms, lock and key imports dropped to $X in 2023. Total imports indicated a strong expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2020 indices. The pace of growth appeared the most rapid in 2021 with an increase of X%. The level of import peaked at $X in 2022, and then contracted in the following year.
Imports by Country
The purchases of the four major importers of padlocks, locks and keys of base metal, namely Indonesia, Malaysia, Vietnam and Thailand, represented more than two-thirds of total import. Cambodia (X tons) ranks next in terms of the total imports with a X% share, followed by the Philippines (X%). Singapore (X tons) followed a long way behind the leaders.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the key importing countries, was attained by Cambodia (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest lock and key importing markets in ASEAN were Vietnam ($X), Indonesia ($X) and Thailand ($X), with a combined X% share of total imports. Malaysia, Singapore, the Philippines and Cambodia lagged somewhat behind, together accounting for a further X%.
Among the main importing countries, Cambodia, with a CAGR of X%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in ASEAN stood at $X per ton in 2023, declining by X% against the previous year. Over the last eleven years, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2014 when the import price increased by X% against the previous year. The level of import peaked at $X per ton in 2022, and then dropped in the following year.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Singapore ($X per ton), while Malaysia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the Philippines (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the lock and key market in ASEAN. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25721130 - Base metal padlocks
- Prodcom 25721150 - Base metal motor vehicle locks
- Prodcom 25721170 - Base metal furniture locks
- Prodcom 25721230 - Base metal cylinder locks used for doors of buildings
- Prodcom 25721250 - Base metal locks used for doors of buildings (excluding cylinder locks)
- Prodcom 25721270 - Base metal locks (excluding padlocks, motor vehicle locks, f urniture locks and locks used for doors of buildings)
- Prodcom 25721330 - Base metal clasps and frames with clasps, with locks (excluding fasteners and clasps for handbags, brief-cases and executive-cases)
- Prodcom 25721350 - Base metal keys presented separately (including roughly cast, forged or stamped blanks, skeleton keys)
- Prodcom 25721410 - Base metal hinges
- Prodcom 25721420 - Castors with mountings of base metal
- Prodcom 25721430 - Base metal mountings, fittings and similar articles suitable for motor vehicles (excluding hinges, castors, locks and keys)
- Prodcom 25721440 - Base metal mountings, fittings and similar articles suitable for buildings (excluding hinges, castors, locks, keys, spy holes fitted with optical elements and key operated door bolts)
- Prodcom 25721450 - Base metal mountings, fittings and similar articles suitable for furniture (excluding hinges, castors, locks and keys)
- Prodcom 25721460 - Other base metal mountings, fittings and similar articles (excluding for motor vehicles, buildings or furniture)
- Prodcom 25721470 - Base metal automatic door closers
- Prodcom 25721480 - Base metal hat-racks, hat-pegs, brackets, coat racks, towel racks, dish-cloth racks, brush racks and key racks (excluding coat-racks having the character of furniture)
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in ASEAN, split by region and country
- Trade (exports and imports) in ASEAN
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the lock and key market in Asia.
This report provides an in-depth analysis of the lock and key market in the U.S..
This report provides an in-depth analysis of the lock and key market in China.
This report provides an in-depth analysis of the lock and key market in the EU.
This report provides an in-depth analysis of the global lock and key market.