Report Thailand - Non-Cellular Plates, Sheets, Film, Foil and Strip of Plastics - Market Analysis, Forecast, Size, Trends and Insights for 499$
Report Update May 1, 2024

Thailand - Non-Cellular Plates, Sheets, Film, Foil and Strip of Plastics - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)
Subscription
Online access and download
from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

Thailand: Market for Non-Cellular Plates, Sheets, Film, Foil and Strip of Plastics 2024

Market Size for Non-Cellular Plates, Sheets, Film, Foil and Strip of Plastics in Thailand

In 2022, after two years of growth, there was decline in the Thai market for non-cellular plates, sheets, film, foil and strip of plastics, when its value decreased by X% to $X. The market value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. Consumption of peaked at $X in 2018; however, from 2019 to 2022, consumption stood at a somewhat lower figure.

Production of Non-Cellular Plates, Sheets, Film, Foil and Strip of Plastics in Thailand

In value terms, production of non-cellular plates, sheets, film, foil and strip of plastics dropped slightly to $X in 2022 estimated in export price. Overall, production, however, continues to indicate a relatively flat trend pattern. The growth pace was the most rapid in 2017 when the production volume increased by X%. As a result, production attained the peak level of $X. From 2018 to 2022, production of growth failed to regain momentum.

Exports of Non-Cellular Plates, Sheets, Film, Foil and Strip of Plastics

Exports from Thailand

In 2022, exports of non-cellular plates, sheets, film, foil and strip of plastics from Thailand contracted modestly to X tons, approximately equating the previous year's figure. Overall, total exports indicated notable growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports decreased by X% against 2019 indices. The most prominent rate of growth was recorded in 2019 when exports increased by X%. As a result, the exports attained the peak of X tons. From 2020 to 2022, the growth of the exports of failed to regain momentum.

In value terms, exports of non-cellular plates, sheets, film, foil and strip of plastics expanded to $X in 2022. Over the period under review, total exports indicated a buoyant increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2018 indices. The most prominent rate of growth was recorded in 2014 when exports increased by X% against the previous year. Over the period under review, the exports of hit record highs in 2022 and are expected to retain growth in years to come.

Exports by Country

The Philippines (X tons), Vietnam (X tons) and Malaysia (X tons) were the main destinations of exports of non-cellular plates, sheets, film, foil and strip of plastics from Thailand, together comprising X% of total exports. Indonesia, Myanmar, India, Australia, the United States, Singapore, Japan, China, Lao People's Democratic Republic and Cambodia lagged somewhat behind, together comprising a further X%.

From 2012 to 2022, the biggest increases were recorded for Cambodia (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.

In value terms, the largest markets for non-cellular plates, sheets, film, foil and strip of plastics exported from Thailand were the Philippines ($X), Vietnam ($X) and Indonesia ($X), together comprising X% of total exports. Malaysia, China, Australia, Myanmar, Singapore, the United States, India, Cambodia, Japan and Lao People's Democratic Republic lagged somewhat behind, together comprising a further X%.

China, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, in terms of the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

In 2022, the average export price for non-cellular plates, sheets, film, foil and strip of plastics amounted to $X per ton, increasing by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The growth pace was the most rapid in 2018 an increase of X% against the previous year. As a result, the export price reached the peak level of $X per ton. From 2019 to 2022, the average export prices remained at a lower figure.

Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was China ($X per ton), while the average price for exports to India ($X per ton) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to China (X%), while the prices for the other major destinations experienced more modest paces of growth.

Imports of Non-Cellular Plates, Sheets, Film, Foil and Strip of Plastics

Imports into Thailand

In 2022, approx. X tons of non-cellular plates, sheets, film, foil and strip of plastics were imported into Thailand; surging by X% against the previous year's figure. Over the period under review, total imports indicated a buoyant expansion from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2019 indices. The pace of growth was the most pronounced in 2014 when imports increased by X% against the previous year. Imports peaked in 2022 and are expected to retain growth in the immediate term.

In value terms, imports of non-cellular plates, sheets, film, foil and strip of plastics expanded modestly to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2014 when imports increased by X%. Over the period under review, imports of reached the maximum in 2022 and are likely to see steady growth in the immediate term.

Imports by Country

In 2022, China (X tons) constituted the largest non-cellular plates, sheets, film, foil and strip of plastics supplier to Thailand, accounting for a X% share of total imports. Moreover, imports of non-cellular plates, sheets, film, foil and strip of plastics from China exceeded the figures recorded by the second-largest supplier, Taiwan (Chinese) (X tons), fivefold. India (X tons) ranked third in terms of total imports with a X% share.

From 2012 to 2022, the average annual rate of growth in terms of volume from China stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (X% per year) and India (X% per year).

In value terms, China ($X) constituted the largest supplier of non-cellular plates, sheets, film, foil and strip of plastics to Thailand, comprising X% of total imports. The second position in the ranking was held by Japan ($X), with a X% share of total imports. It was followed by Taiwan (Chinese), with a X% share.

From 2012 to 2022, the average annual growth rate of value from China totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (X% per year) and Taiwan (Chinese) (X% per year).

Import Prices by Country

The average import price for non-cellular plates, sheets, film, foil and strip of plastics stood at $X per ton in 2022, approximately mirroring the previous year. Overall, the import price showed a noticeable descent. The most prominent rate of growth was recorded in 2019 when the average import price increased by X% against the previous year. Over the period under review, average import prices reached the maximum at $X per ton in 2012; however, from 2013 to 2022, import prices stood at a somewhat lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Japan ($X per ton), while the price for China ($X per ton) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Malaysia (X%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

The countries with the highest volumes of consumption in 2023 were China, the United States and India, together comprising 44% of global consumption. Brazil, Turkey, Russia, Indonesia, Japan, Mexico, Germany, Canada and Italy lagged somewhat behind, together comprising a further 29%.
China constituted the country with the largest volume of production of non-cellular plates, sheets, film, foil and strip of plastics, accounting for 26% of total volume. Moreover, production of non-cellular plates, sheets, film, foil and strip of plastics in China exceeded the figures recorded by the second-largest producer, the United States, twofold. India ranked third in terms of total production with a 9% share.
In value terms, China constituted the largest supplier of non-cellular plates, sheets, film, foil and strip of plastics to Thailand, comprising 36% of total imports. The second position in the ranking was held by Japan, with a 12% share of total imports. It was followed by Taiwan Chinese), with a 12% share.
In value terms, the Philippines, Vietnam and Indonesia were the largest markets for non-cellular plates, sheets, film, foil and strip of plastics exported from Thailand worldwide, together comprising 57% of total exports. Malaysia, China, Australia, Myanmar, Singapore, the United States, India, Cambodia, Japan and Lao People's Democratic Republic lagged somewhat behind, together accounting for a further 32%.
In 2022, the average export price for non-cellular plates, sheets, film, foil and strip of plastics amounted to $5,675 per ton, with an increase of 4.1% against the previous year.
The average import price for non-cellular plates, sheets, film, foil and strip of plastics stood at $3,954 per ton in 2022, stabilizing at the previous year.

This report provides an in-depth analysis of the market for non-cellular plates, sheets, film, foil and strip of plastics in Thailand. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

  • Prodcom 22214230 - Non-cellular plates, sheets, film, foil, strip of condensation or rearrangement polymerisation products, polyesters, r einforced, laminated, supported/similarly comb. with other materials)
  • Prodcom 22214250 - Non-cellular plates, strips..., of phenolic resins
  • Prodcom 22214275 - Non-cellular plates, sheets, film, foil, strip of condensation or rearrangement polymerisation products, amino-resins (high pressure laminates, decorative surface one/both sides)
  • Prodcom 22214279 - Other plates, sheets, films, foil and strip, of polymerisation products
  • Prodcom 22214280 - Other plates..., non-cellular of plastics other than made by polymerisation

Country coverage:

  • Thailand

Data coverage:

  • Market volume and value
  • Per Capita consumption
  • Forecast of the market dynamics in the medium term
  • Trade (exports and imports) in Thailand
  • Export and import prices
  • Market trends, drivers and restraints
  • Key market players and their profiles

Reasons to buy this report:

  • Take advantage of the latest data
  • Find deeper insights into current market developments
  • Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

  1. How to diversify your business and benefit from new market opportunities
  2. How to load your idle production capacity
  3. How to boost your sales on overseas markets
  4. How to increase your profit margins
  5. How to make your supply chain more sustainable
  6. How to reduce your production and supply chain costs
  7. How to outsource production to other countries
  8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

  1. 1. INTRODUCTION

    Making Data-Driven Decisions to Grow Your Business

    1. REPORT DESCRIPTION
    2. RESEARCH METHODOLOGY AND AI PLATFORM
    3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
    4. GLOSSARY AND SPECIFIC TERMS
  2. 2. EXECUTIVE SUMMARY

    A Quick Overview of Market Performance

    1. KEY FINDINGS
    2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
  3. 3. MARKET OVERVIEW

    Understanding the Current State of The Market and Its Prospects

    1. MARKET SIZE
    2. MARKET STRUCTURE
    3. TRADE BALANCE
    4. PER CAPITA CONSUMPTION
    5. MARKET FORECAST TO 2030
  4. 4. MOST PROMISING PRODUCT

    Finding New Products to Diversify Your Business

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
    2. BEST-SELLING PRODUCTS
    3. MOST CONSUMED PRODUCT
    4. MOST TRADED PRODUCT
    5. MOST PROFITABLE PRODUCT FOR EXPORT
  5. 5. MOST PROMISING SUPPLYING COUNTRIES

    Choosing the Best Countries to Establish Your Sustainable Supply Chain

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
    2. TOP PRODUCING COUNTRIES
    3. TOP EXPORTING COUNTRIES
    4. LOW-COST EXPORTING COUNTRIES
  6. 6. MOST PROMISING OVERSEAS MARKETS

    Choosing the Best Countries to Boost Your Exports

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
    2. TOP CONSUMING MARKETS
    3. UNSATURATED MARKETS
    4. TOP IMPORTING MARKETS
    5. MOST PROFITABLE MARKETS
  7. 7. PRODUCTION

    The Latest Trends and Insights into The Industry

    1. PRODUCTION VOLUME AND VALUE
  8. 8. IMPORTS

    The Largest Import Supplying Countries

    1. IMPORTS FROM 2012–2023
    2. IMPORTS BY COUNTRY
    3. IMPORT PRICES BY COUNTRY
  9. 9. EXPORTS

    The Largest Destinations for Exports

    1. EXPORTS FROM 2012–2023
    2. EXPORTS BY COUNTRY
    3. EXPORT PRICES BY COUNTRY
  10. 10. PROFILES OF MAJOR PRODUCERS

    The Largest Producers on The Market and Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
  11. LIST OF TABLES

    1. Key Findings In 2023
    2. Market Volume, In Physical Terms, 2012–2023
    3. Market Value, 2012–2023
    4. Per Capita Consumption In 2012-2023
    5. Imports, In Physical Terms, By Country, 2012–2023
    6. Imports, In Value Terms, By Country, 2012–2023
    7. Import Prices, By Country Of Origin, 2012–2023
    8. Exports, In Physical Terms, By Country, 2012–2023
    9. Exports, In Value Terms, By Country, 2012–2023
    10. Export Prices, By Country Of Destination, 2012–2023
  12. LIST OF FIGURES

    1. Market Volume, In Physical Terms, 2012–2023
    2. Market Value, 2012–2023
    3. Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
    4. Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
    5. Trade Balance, In Physical Terms, 2012-2023
    6. Trade Balance, In Value Terms, 2012-2023
    7. Per Capita Consumption, 2012-2023
    8. Market Volume Forecast to 2030
    9. Market Value Forecast to 2030
    10. Products: Market Size And Growth, By Type
    11. Products: Average Per Capita Consumption, By Type
    12. Products: Exports And Growth, By Type
    13. Products: Export Prices And Growth, By Type
    14. Production Volume And Growth
    15. Exports And Growth
    16. Export Prices And Growth
    17. Market Size And Growth
    18. Per Capita Consumption
    19. Imports And Growth
    20. Import Prices
    21. Production, In Physical Terms, 2012–2023
    22. Production, In Value Terms, 2012–2023
    23. Imports, In Physical Terms, 2012–2023
    24. Imports, In Value Terms, 2012–2023
    25. Imports, In Physical Terms, By Country, 2023
    26. Imports, In Physical Terms, By Country, 2012–2023
    27. Imports, In Value Terms, By Country, 2012–2023
    28. Import Prices, By Country Of Origin, 2012–2023
    29. Exports, In Physical Terms, 2012–2023
    30. Exports, In Value Terms, 2012–2023
    31. Exports, In Physical Terms, By Country, 2023
    32. Exports, In Physical Terms, By Country, 2012–2023
    33. Exports, In Value Terms, By Country, 2012–2023
    34. Export Prices, By Country Of Destination, 2012–2023

Recommended reports

Free Data: Non-Cellular Plates, Sheets, Film, Foil and Strip of Plastics - Thailand