Philippines - Nails, Tacks, Staples, Screws and Bolts - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingPhilippines: Nail And Bolt Market 2024
Nail And Bolt Market Size in the Philippines
The Philippine nail and bolt market dropped slightly to $X in 2022, falling by X% against the previous year. The market value increased at an average annual rate of X% from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. Over the period under review, the market attained the maximum level at $X in 2017; however, from 2018 to 2022, consumption failed to regain momentum.
Nail And Bolt Production in the Philippines
In value terms, nail and bolt production contracted to $X in 2022 estimated in export price. Overall, production, however, recorded modest growth. The growth pace was the most rapid in 2017 when the production volume increased by X%. Nail and bolt production peaked at $X in 2019; however, from 2020 to 2022, production failed to regain momentum.
Nail And Bolt Exports
Exports from the Philippines
In 2022, overseas shipments of nails, tacks, staples, screws and bolts increased by X% to X tons, rising for the second year in a row after two years of decline. Over the period under review, exports showed a prominent expansion. The most prominent rate of growth was recorded in 2018 with an increase of X%. The exports peaked in 2022 and are likely to see gradual growth in years to come.
In value terms, nail and bolt exports declined to $X in 2022. In general, exports continue to indicate a resilient expansion. The pace of growth appeared the most rapid in 2018 when exports increased by X% against the previous year. The exports peaked at $X in 2019; however, from 2020 to 2022, the exports failed to regain momentum.
Exports by Country
Japan (X tons) was the main destination for nail and bolt exports from the Philippines, accounting for a X% share of total exports. Moreover, nail and bolt exports to Japan exceeded the volume sent to the second major destination, the United States (X tons), sevenfold. The third position in this ranking was taken by France (X tons), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume to Japan stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the United States (X% per year) and France (X% per year).
In value terms, Japan ($X) remains the key foreign market for nails, tacks, staples, screws and bolts exports from the Philippines, comprising X% of total exports. The second position in the ranking was taken by the United States ($X), with a X% share of total exports. It was followed by Germany, with a X% share.
From 2012 to 2022, the average annual growth rate of value to Japan amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the United States (X% per year) and Germany (X% per year).
Export Prices by Country
The average nail and bolt export price stood at $X per ton in 2022, declining by X% against the previous year. Over the period under review, the export price showed a mild contraction. The pace of growth was the most pronounced in 2019 when the average export price increased by X% against the previous year. As a result, the export price reached the peak level of $X per ton. From 2020 to 2022, the average export prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Germany ($X per ton), while the average price for exports to France ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Taiwan (Chinese) (X%), while the prices for the other major destinations experienced more modest paces of growth.
Nail And Bolt Imports
Imports into the Philippines
In 2022, overseas purchases of nails, tacks, staples, screws and bolts increased by X% to X tons, rising for the second year in a row after two years of decline. In general, imports continue to indicate a prominent increase. The most prominent rate of growth was recorded in 2014 with an increase of X% against the previous year. Over the period under review, imports hit record highs in 2022 and are expected to retain growth in years to come.
In value terms, nail and bolt imports rose modestly to $X in 2022. Over the period under review, imports enjoyed buoyant growth. The growth pace was the most rapid in 2014 with an increase of X%. Imports peaked in 2022 and are likely to see steady growth in the immediate term.
Imports by Country
In 2022, China (X tons) constituted the largest nail and bolt supplier to the Philippines, with a X% share of total imports. Moreover, nail and bolt imports from China exceeded the figures recorded by the second-largest supplier, Taiwan (Chinese) (X tons), more than tenfold. The third position in this ranking was taken by Japan (X tons), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (X% per year) and Japan (X% per year).
In value terms, the largest nail and bolt suppliers to the Philippines were China ($X), Japan ($X) and Singapore ($X), with a combined X% share of total imports. Taiwan (Chinese), Vietnam and South Korea lagged somewhat behind, together accounting for a further X%.
In terms of the main suppliers, Vietnam, with a CAGR of X%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average nail and bolt import price amounted to $X per ton, shrinking by X% against the previous year. In general, import price indicated tangible growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, nail and bolt import price increased by X% against 2014 indices. The pace of growth appeared the most rapid in 2015 when the average import price increased by X%. Over the period under review, average import prices hit record highs at $X per ton in 2021, and then fell in the following year.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Singapore ($X per ton), while the price for China ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Singapore (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the nail and bolt market in the Philippines. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25931410 -
- Prodcom 25931480 -
- Prodcom 25941113 - Screws, turned from bars, rods, profiles, or wire, of a shank thickness . 6 mm
- Prodcom 25941115 - Other screws and bolts for fixing railway truck construction material, iron or steel
- Prodcom 25941117 - Screws and bolts without heads in steel
- Prodcom 25941123 - Slotted and cross-recessed screws of stainless steel
- Prodcom 25941125 - Other screws and bolts with heads
- Prodcom 25941127 - Hexagon socket head screws of stainless steel
- Prodcom 25941129 - Other hexagon socket head screws
- Prodcom 25941131 - Stainless steel hexagon bolts with heads
- Prodcom 25941133 - Iron or steel hexagon bolts with heads, with a tensile strength < .800 MPa (excluding of stainless steel)
- Prodcom 25941135 - Iron or steel hexagon bolts with heads, with a tensile strength. .800 MPa (excluding of stainless steel)
- Prodcom 25941139 - Iron or steel bolts with heads (excluding hexagon bolts)
- Prodcom 25941153 - Iron or steel wood screws
- Prodcom 25941157 - Iron or steel screw hooks and screw rings
- Prodcom 25941173 - Stainless steel self-tapping screws (excluding threaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941175 - Iron or steel self-tapping screws (excluding of stainless steel, t hreaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941183 - Iron or steel nuts turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm
- Prodcom 25941185 - Stainless steel nuts (excluding those turned from bars, rods, p rofiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941187 - Iron or steel nuts (including self-locking nuts) (excluding of stainless steel, turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941190 - Threaded articles, n.e.c., of iron or steel
- Prodcom 25941210 - Iron or steel spring washers and other lock washers
- Prodcom 25941230 - Iron or steel washers (excluding spring washers and other lock washers)
- Prodcom 25941250 - Iron or steel rivets (including partly hollow rivets) (excluding tubular or bifurcated rivets for all purposes)
- Prodcom 25941270 - Iron or steel cotters and cotter-pins and similar non-threaded articles (excluding washers, rivets)
- Prodcom 25941310 - Washers, rivets, cotters, cotter pins and the like, not threaded, of copper
- Prodcom 25941340 - Copper screws, bolts and nuts (excluding pointed screw nails, s crew stoppers, threaded mechanisms used to transmit motion/to act as active machinery part, screw hooks, rings)
- Prodcom 25941370 - Threaded articles of copper, n.e.c.
Country coverage:
- Philippines
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in the Philippines
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the nail and bolt market in Asia.
This report provides an in-depth analysis of the nail and bolt market in the U.S..
This report provides an in-depth analysis of the nail and bolt market in China.
This report provides an in-depth analysis of the nail and bolt market in the EU.
This report provides an in-depth analysis of the global nail and bolt market.