Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingIn 2025, the Israeli plastic furniture fittings market increased by X% to $X, rising for the second consecutive year after two years of decline. Overall, the total consumption indicated a moderate expansion from 2012 to 2025: its value increased at an average annual rate of X% over the last twelve-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2025 figures, consumption increased by X% against 2022 indices. Over the period under review, the market attained the peak level in 2025 and is expected to retain growth in the immediate term.
In value terms, plastic furniture fittings production expanded rapidly to $X in 2025 estimated in export price. Over the period under review, the total production indicated measured growth from 2012 to 2025: its value increased at an average annual rate of X% over the last twelve-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2025 figures, production increased by X% against 2021 indices. The most prominent rate of growth was recorded in 2017 when the production volume increased by X% against the previous year. Over the period under review, production reached the peak level in 2025 and is likely to see gradual growth in the near future.
In 2025, the amount of plastic fittings for furniture exported from Israel contracted sharply to X tons, waning by X% against the year before. In general, exports, however, saw a slight expansion. The growth pace was the most rapid in 2013 with an increase of X%. Over the period under review, the exports attained the maximum at X tons in 2016; however, from 2017 to 2025, the exports failed to regain momentum.
In value terms, plastic furniture fittings exports fell significantly to $X in 2025. Over the period under review, exports, however, continue to indicate a tangible expansion. The most prominent rate of growth was recorded in 2023 with an increase of X%. The exports peaked at $X in 2016; however, from 2017 to 2025, the exports stood at a somewhat lower figure.
Germany (X tons), China (X tons) and Poland (X tons) were the main destinations of plastic furniture fittings exports from Israel, with a combined X% share of total exports. The United States and Slovenia lagged somewhat behind, together accounting for a further X%.
From 2012 to 2025, the biggest increases were recorded for the United States (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X), China ($X) and Poland ($X) constituted the largest markets for plastic furniture fittings exported from Israel worldwide, with a combined X% share of total exports. The United States and Slovenia lagged somewhat behind, together comprising a further X%.
The United States, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, in terms of the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
The average plastic furniture fittings export price stood at $X per ton in 2025, increasing by X% against the previous year. Over the period from 2012 to 2025, it increased at an average annual rate of X%. The pace of growth was the most pronounced in 2017 when the average export price increased by X% against the previous year. The export price peaked in 2025 and is likely to see gradual growth in years to come.
Average prices varied noticeably for the major external markets. In 2025, amid the top suppliers, the highest price was recorded for prices to Slovenia ($X per ton) and the United States ($X per ton), while the average price for exports to Poland ($X per ton) and Germany ($X per ton) were amongst the lowest.
From 2012 to 2025, the most notable rate of growth in terms of prices was recorded for supplies to Canada (X%), while the prices for the other major destinations experienced more modest paces of growth.
In 2025, overseas purchases of plastic fittings for furniture were finally on the rise to reach X tons for the first time since 2021, thus ending a two-year declining trend. In general, total imports indicated a measured expansion from 2012 to 2025: its volume increased at an average annual rate of X% over the last twelve years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2025 figures, imports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2021 when imports increased by X%. As a result, imports attained the peak of X tons. From 2022 to 2025, the growth of imports remained at a lower figure.
In value terms, plastic furniture fittings imports surged to $X in 2025. Overall, total imports indicated a prominent increase from 2012 to 2025: its value increased at an average annual rate of X% over the last twelve-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2025 figures, imports decreased by X% against 2021 indices. The growth pace was the most rapid in 2021 with an increase of X% against the previous year. As a result, imports attained the peak of $X. From 2022 to 2025, the growth of imports remained at a lower figure.
In 2025, China (X tons) constituted the largest plastic furniture fittings supplier to Israel, with a X% share of total imports. Moreover, plastic furniture fittings imports from China exceeded the figures recorded by the second-largest supplier, Italy (X tons), threefold. Germany (X tons) ranked third in terms of total imports with a X% share.
From 2012 to 2025, the average annual rate of growth in terms of volume from China stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: Italy (X% per year) and Germany (X% per year).
In value terms, China ($X) constituted the largest supplier of plastic fittings for furniture to Israel, comprising X% of total imports. The second position in the ranking was held by Italy ($X), with a X% share of total imports. It was followed by Germany, with a X% share.
From 2012 to 2025, the average annual rate of growth in terms of value from China totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: Italy (X% per year) and Germany (X% per year).
In 2025, the average plastic furniture fittings import price amounted to $X per ton, approximately equating the previous year. Over the period from 2012 to 2025, it increased at an average annual rate of X%. The pace of growth was the most pronounced in 2018 when the average import price increased by X%. Over the period under review, average import prices attained the maximum at $X per ton in 2023, and then fell slightly in the following year.
Average prices varied noticeably amongst the major supplying countries. In 2025, amid the top importers, the highest price was recorded for prices from Taiwan (Chinese) ($X per ton) and India ($X per ton), while the price for Hong Kong SAR ($X per ton) and France ($X per ton) were amongst the lowest.
From 2012 to 2025, the most notable rate of growth in terms of prices was attained by India (X%), while the prices for the other major suppliers experienced more modest paces of growth.
This report provides a comprehensive view of the plastic furniture fittings industry in Israel, tracking demand, supply, and trade flows across the national value chain. It explains how demand across key channels and end-use segments shapes consumption patterns, while also mapping the role of input availability, production efficiency, and regulatory standards on supply.
Beyond headline metrics, the study benchmarks prices, margins, and trade routes so you can see where value is created and how it moves between domestic suppliers and international partners. The analysis is designed to support strategic planning, market entry, portfolio prioritization, and risk management in the plastic furniture fittings landscape in Israel.
The report combines market sizing with trade intelligence and price analytics for Israel. It covers both historical performance and the forward outlook to 2035, allowing you to compare cycles, structural shifts, and policy impacts.
This report provides a consistent view of market size, trade balance, prices, and per-capita indicators for Israel. The profile highlights demand structure and trade position, enabling benchmarking against regional and global peers.
The analysis is built on a multi-source framework that combines official statistics, trade records, company disclosures, and expert validation. Data are standardized, reconciled, and cross-checked to ensure consistency across time series.
All data are normalized to a common product definition and mapped to a consistent set of codes. This ensures that comparisons across time are aligned and actionable.
The forecast horizon extends to 2035 and is based on a structured model that links plastic furniture fittings demand and supply to macroeconomic indicators, trade patterns, and sector-specific drivers. The model captures both cyclical and structural factors and reflects known policy and technology shifts in Israel.
Each projection is built from national historical patterns and the broader regional context, allowing the report to show where growth is concentrated and where risks are elevated.
Prices are analyzed in detail, including export and import unit values, regional spreads, and changes in trade costs. The report highlights how seasonality, freight rates, exchange rates, and supply disruptions influence pricing and margins.
Key producers, exporters, and distributors are profiled with a focus on their operational scale, geographic footprint, product mix, and market positioning. This helps identify competitive pressure points, partnership opportunities, and routes to differentiation.
This report is designed for manufacturers, distributors, importers, wholesalers, investors, and advisors who need a clear, data-driven picture of plastic furniture fittings dynamics in Israel.
The market size aggregates consumption and trade data, presented in both value and volume terms.
The projections combine historical trends with macroeconomic indicators, trade dynamics, and sector-specific drivers.
Yes, it includes export and import unit values, regional spreads, and a pricing outlook to 2035.
The report benchmarks market size, trade balance, prices, and per-capita indicators for Israel.
Yes, it highlights demand hotspots, trade routes, pricing trends, and competitive context.
Making Data-Driven Decisions to Grow Your Business
A Quick Overview of Market Performance
Understanding the Current State of The Market and its Prospects
Finding New Products to Diversify Your Business
Choosing the Best Countries to Establish Your Sustainable Supply Chain
Choosing the Best Countries to Boost Your Export
The Latest Trends and Insights into The Industry
The Largest Import Supplying Countries
The Largest Destinations for Exports
The Largest Producers on The Market and Their Profiles
Analysis highlights three small-cap stocks—Semrush, Revolve, and Quanex—facing significant financial and operational challenges, including poor revenue retention, growth limits, and eroding margins.
Global plastic furniture fittings market analysis and forecast to 2035. Covers consumption, production, trade, key countries (China, Mexico, US), and growth projections with CAGR for volume and value.
Global plastic furniture fittings market to reach 2.6M tons and $27.9B by 2035, driven by rising demand. Analysis covers consumption, production, trade, and key country insights from 2013-2024.
The global plastic furniture fittings market is forecast to grow, reaching 2.7M tons and $27.9B by 2035. This analysis covers consumption, production, trade, and key country-level insights, highlighting growth leaders like Mexico and the UK.
Discover how the global market for plastic fittings for furniture is expected to grow over the next decade, with a forecasted increase in market volume to 2.7M tons and market value to $27.9B by 2035.
Learn about the expected growth in the global market for plastic fittings for furniture, with projections showing a steady increase in both volume and value terms over the next decade.
Verified reviewers highlight faster qualification, clearer collaboration, and stronger bid readiness.
High Performer
Regional Grid
High Performer Small-Business
Grid Report
Leader Small-Business
Grid Report
High Performer Mid-Market
Grid Report
Leader
Grid Report
Users Love Us
Milestone badge
Cristian Spataru
Commercial Manager · XTRATECRO
Great for Market Insights and Analysis
“IndexBox is a solid source for trade and industrial market data — what I like best about it is how it aggregates official statistics.”
Review collected and hosted on G2.com.
Juan Pablo Cabrera
Gerente de Innovación · Cartocor
Extremely gratifying
“Access very specific and broad information of any type of market.”
Review collected and hosted on G2.com.
Dilan Salam
GMP; ISO Compliance Supervisor · PiONEER Co. for Pharmaceutical Industries
Powerful data at a fair price
“I have got a lot of benefit from IndexBox, too many data available, and easy to use software at a very good price.”
Review collected and hosted on G2.com.
Counselor Hasan AlKhoori
Founder and CEO · Independent
All the data required
“All the data required for building your full analytics infrastructure.”
Review collected and hosted on G2.com.
Ashenafi Behailu
General Manager · Ashenafi Behailu General Contractor
Detailed, well-organized data
“The data organization and level of detail which it is presented in is very helpful.”
Review collected and hosted on G2.com.
Iman Aref
Senior Export Manager · Padideh Shimi Gharn
Up to date and precise info
“Up to date and precise info, for fulfilling the validity and reliability of the given research.”
Review collected and hosted on G2.com.
Companies list is being prepared. Please check back soon.
Charts mirror the report figures on the platform. Values are synthetic for demo use.
| Top consuming countries | Share, % |
|---|
| Segment | Growth, % |
|---|
| Segment | Kg per capita |
|---|
| Top producing countries | Share, % |
|---|
| Top export price | USD per ton |
|---|
| Top import price | USD per ton |
|---|
| Top importing countries | Share, % |
|---|
| Top import price | USD per ton |
|---|
| Top exporting countries | Share, % |
|---|
| Top export price | USD per ton |
|---|
| Segment | Growth, % |
|---|
| Segment | Growth, % |
|---|
| Product | Rationale |
|---|
Real macro, logistics, and energy indicators are pulled from the IndexBox platform and rendered on demand.
788
This report provides an in-depth analysis of the global plastic furniture fittings market.
661
This report provides an in-depth analysis of the plastic furniture fittings market in the U.S..
637
This report provides an in-depth analysis of the plastic furniture fittings market in the EU.
622
This report provides an in-depth analysis of the plastic furniture fittings market in China.
615
This report provides an in-depth analysis of the plastic furniture fittings market in Asia.
6628
This report provides an in-depth analysis of the condom market in Vietnam.
5627
This report provides an in-depth analysis of the global condom market.
4826
This report provides an in-depth analysis of the condom market in India.
4550
This report provides an in-depth analysis of the condom market in Pakistan.
Instant access. No credit card needed.
Instant access. No credit card needed.
