Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingThe Greek injection-moulding machine market skyrocketed to $X in 2025, with an increase of X% against the previous year. Overall, consumption recorded significant growth. As a result, consumption reached the peak level of $X. From 2022 to 2025, the growth of the market remained at a lower figure.
In value terms, injection-moulding machine production reached $X in 2025 estimated in export price. Over the period under review, production recorded a pronounced decrease. The most prominent rate of growth was recorded in 2020 when the production volume increased by X%. As a result, production attained the peak level of $X. From 2021 to 2025, production growth failed to regain momentum.
In 2025, the amount of injection-moulding machines for working rubber or plastics exported from Greece surged to X units, jumping by X% on 2023 figures. Over the period under review, exports posted a strong expansion. The most prominent rate of growth was recorded in 2020 when exports increased by X% against the previous year. As a result, the exports reached the peak of X units. From 2021 to 2025, the growth of the exports remained at a somewhat lower figure.
In value terms, injection-moulding machine exports soared to $X in 2025. Overall, exports posted a significant expansion. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, the exports reached the maximum in 2025 and are expected to retain growth in the near future.
Belgium (X units), Portugal (X units) and Albania (X units) were the main destinations of injection-moulding machine exports from Greece, with a combined X% share of total exports. Brazil, Turkey, Spain and Italy lagged somewhat behind, together comprising a further X%.
From 2012 to 2025, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Turkey (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, the largest markets for injection-moulding machine exported from Greece were Belgium ($X), Portugal ($X) and Spain ($X), with a combined X% share of total exports.
Portugal, with a CAGR of X.0%, recorded the highest growth rate of the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
The average injection-moulding machine export price stood at $X thousand per unit in 2025, growing by X% against the previous year. In general, the export price recorded a prominent increase. The most prominent rate of growth was recorded in 2021 when the average export price increased by X,484% against the previous year. As a result, the export price reached the peak level of $X thousand per unit. From 2022 to 2025, the average export prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Portugal ($X thousand per unit), while the average price for exports to Italy ($X per unit) was amongst the lowest.
From 2012 to 2025, the most notable rate of growth in terms of prices was recorded for supplies to Portugal (X.7%), while the prices for the other major destinations experienced mixed trend patterns.
Injection-moulding machine imports into Greece soared to X units in 2025, picking up by X% compared with the previous year's figure. Over the period under review, imports saw a significant increase. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. As a result, imports reached the peak of X units. From 2022 to 2025, the growth of imports failed to regain momentum.
In value terms, injection-moulding machine imports fell to $X in 2025. In general, imports showed a pronounced expansion. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Imports peaked at $X in 2018; however, from 2019 to 2025, imports failed to regain momentum.
China (X units), Italy (X units) and Austria (X units) were the main suppliers of injection-moulding machine imports to Greece, with a combined X% share of total imports. Germany, France, Switzerland, Poland, Canada and the Netherlands lagged somewhat behind, together comprising a further X%.
From 2012 to 2025, the biggest increases were recorded for Poland (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest injection-moulding machine suppliers to Greece were Austria ($X), Germany ($X) and China ($X), with a combined X% share of total imports. Italy, Switzerland, Poland, France, Canada and the Netherlands lagged somewhat behind, together accounting for a further X%.
Among the main suppliers, Poland, with a CAGR of X%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
The average injection-moulding machine import price stood at $X per unit in 2025, dropping by X% against the previous year. Overall, the import price faced a precipitous descent. The most prominent rate of growth was recorded in 2022 when the average import price increased by X% against the previous year. The import price peaked at $X thousand per unit in 2012; however, from 2013 to 2025, import prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was the Netherlands ($X thousand per unit), while the price for France ($X per unit) was amongst the lowest.
From 2012 to 2025, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the prices for the other major suppliers experienced a decline.
This report provides a comprehensive view of the injection-moulding machine industry in Greece, tracking demand, supply, and trade flows across the national value chain. It explains how demand across key channels and end-use segments shapes consumption patterns, while also mapping the role of input availability, production efficiency, and regulatory standards on supply.
Beyond headline metrics, the study benchmarks prices, margins, and trade routes so you can see where value is created and how it moves between domestic suppliers and international partners. The analysis is designed to support strategic planning, market entry, portfolio prioritization, and risk management in the injection-moulding machine landscape in Greece.
The report combines market sizing with trade intelligence and price analytics for Greece. It covers both historical performance and the forward outlook to 2035, allowing you to compare cycles, structural shifts, and policy impacts.
This report provides a consistent view of market size, trade balance, prices, and per-capita indicators for Greece. The profile highlights demand structure and trade position, enabling benchmarking against regional and global peers.
The analysis is built on a multi-source framework that combines official statistics, trade records, company disclosures, and expert validation. Data are standardized, reconciled, and cross-checked to ensure consistency across time series.
All data are normalized to a common product definition and mapped to a consistent set of codes. This ensures that comparisons across time are aligned and actionable.
The forecast horizon extends to 2035 and is based on a structured model that links injection-moulding machine demand and supply to macroeconomic indicators, trade patterns, and sector-specific drivers. The model captures both cyclical and structural factors and reflects known policy and technology shifts in Greece.
Each projection is built from national historical patterns and the broader regional context, allowing the report to show where growth is concentrated and where risks are elevated.
Prices are analyzed in detail, including export and import unit values, regional spreads, and changes in trade costs. The report highlights how seasonality, freight rates, exchange rates, and supply disruptions influence pricing and margins.
Key producers, exporters, and distributors are profiled with a focus on their operational scale, geographic footprint, product mix, and market positioning. This helps identify competitive pressure points, partnership opportunities, and routes to differentiation.
This report is designed for manufacturers, distributors, importers, wholesalers, investors, and advisors who need a clear, data-driven picture of injection-moulding machine dynamics in Greece.
The market size aggregates consumption and trade data, presented in both value and volume terms.
The projections combine historical trends with macroeconomic indicators, trade dynamics, and sector-specific drivers.
Yes, it includes export and import unit values, regional spreads, and a pricing outlook to 2035.
The report benchmarks market size, trade balance, prices, and per-capita indicators for Greece.
Yes, it highlights demand hotspots, trade routes, pricing trends, and competitive context.
Making Data-Driven Decisions to Grow Your Business
A Quick Overview of Market Performance
Understanding the Current State of The Market and its Prospects
Finding New Products to Diversify Your Business
Choosing the Best Countries to Establish Your Sustainable Supply Chain
Choosing the Best Countries to Boost Your Export
The Latest Trends and Insights into The Industry
The Largest Import Supplying Countries
The Largest Destinations for Exports
The Largest Producers on The Market and Their Profiles
The industrial machinery sector showed mixed Q1 2026 results, with revenue beating expectations but valuations falling. Stratasys reported a revenue decline but improved its annual guidance.
3D Systems stock surged after reporting Q4 2025 revenue that beat market expectations and providing future guidance above consensus estimates, despite posting a larger-than-expected per-share loss.
Stratasys reported mixed Q4 2025 results with revenue above forecasts but down year-over-year, and provided its 2026 financial outlook, highlighting growth in manufacturing applications.
Stratasys announces improved reliability for its F900 industrial 3D printer, citing collaborative enhancements with major manufacturing clients to enable scalable production of end-use parts and tooling.
Rapid Fusion surpasses $2M in revenue and prepares for the commercial rollout of its Cerberus containerized hybrid manufacturing system, designed for rapid deployment in remote and demanding environments.
Global injection-moulding machine market forecast to reach 1.5M units and $46.2B by 2035. Analysis covers 2024 consumption, production, trade trends, and key country insights for rubber and plastics machinery.
Verified reviewers highlight faster qualification, clearer collaboration, and stronger bid readiness.
High Performer
Regional Grid
High Performer Small-Business
Grid Report
Leader Small-Business
Grid Report
High Performer Mid-Market
Grid Report
Leader
Grid Report
Users Love Us
Milestone badge
Cristian Spataru
Commercial Manager · XTRATECRO
Great for Market Insights and Analysis
“IndexBox is a solid source for trade and industrial market data — what I like best about it is how it aggregates official statistics.”
Review collected and hosted on G2.com.
Juan Pablo Cabrera
Gerente de Innovación · Cartocor
Extremely gratifying
“Access very specific and broad information of any type of market.”
Review collected and hosted on G2.com.
Dilan Salam
GMP; ISO Compliance Supervisor · PiONEER Co. for Pharmaceutical Industries
Powerful data at a fair price
“I have got a lot of benefit from IndexBox, too many data available, and easy to use software at a very good price.”
Review collected and hosted on G2.com.
Counselor Hasan AlKhoori
Founder and CEO · Independent
All the data required
“All the data required for building your full analytics infrastructure.”
Review collected and hosted on G2.com.
Ashenafi Behailu
General Manager · Ashenafi Behailu General Contractor
Detailed, well-organized data
“The data organization and level of detail which it is presented in is very helpful.”
Review collected and hosted on G2.com.
Iman Aref
Senior Export Manager · Padideh Shimi Gharn
Up to date and precise info
“Up to date and precise info, for fulfilling the validity and reliability of the given research.”
Review collected and hosted on G2.com.
Companies list is being prepared. Please check back soon.
Charts mirror the report figures on the platform. Values are synthetic for demo use.
| Top consuming countries | Share, % |
|---|
| Segment | Growth, % |
|---|
| Segment | Kg per capita |
|---|
| Top producing countries | Share, % |
|---|
| Top export price | USD per ton |
|---|
| Top import price | USD per ton |
|---|
| Top importing countries | Share, % |
|---|
| Top import price | USD per ton |
|---|
| Top exporting countries | Share, % |
|---|
| Top export price | USD per ton |
|---|
| Segment | Growth, % |
|---|
| Segment | Growth, % |
|---|
| Product | Rationale |
|---|
Real macro, logistics, and energy indicators are pulled from the IndexBox platform and rendered on demand.
1726
This report provides an in-depth analysis of the injection-moulding machine market in the U.S..
1006
This report provides an in-depth analysis of the injection-moulding machine market in China.
888
This report provides an in-depth analysis of the global injection-moulding machine market.
804
This report provides an in-depth analysis of the injection-moulding machine market in Asia.
775
This report provides an in-depth analysis of the injection-moulding machine market in the EU.
7194
This report provides an in-depth analysis of the global wire and cable market.
5573
This report provides an in-depth analysis of the wire and cable market in Turkey.
5472
This report provides an in-depth analysis of the global optical fiber cables market.
5332
This report provides an in-depth analysis of the global refrigerator and freezer market.
Instant access. No credit card needed.
Instant access. No credit card needed.
