Latest Report Update: Dec 27, 2019

Netherlands - Interchangeable Tools For Hand Tools - Market Analysis, Forecast, Size, Trends and Insights
Update: COVID-19 Impact

Licenses

You will receive a PDF copy of the report by email within 24 hours (Mon - Fri).

By clicking «Buy the Report», you agree to our Terms of Service and Privacy Policy. We'll occasionally send you account related emails.

Netherlands: Interchangeable Tool Market Overview 2020

Interchangeable Tool Market Size in the Netherlands

The revenue of the interchangeable tool market in the Netherlands amounted to $X in 2018, coming down by -X% against the previous year. Over the period under review, interchangeable tool consumption continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2011 when the market value increased by X% against the previous year. Interchangeable tool consumption peaked at $X in 2012; however, from 2013 to 2018, consumption stood at a somewhat lower figure.

Interchangeable Tool Production in the Netherlands

In value terms, interchangeable tool production totaled $X in 2018 estimated in export prices. Over the period under review, the total output indicated slight growth from 2007 to 2018: its value decreased at an average annual rate of -X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2018 figures, interchangeable tool production decreased by -X% against 2016 indices. The most prominent rate of growth was recorded in 2013 when production volume increased by X% against the previous year. Interchangeable tool production peaked at $X in 2016; however, from 2017 to 2018, production remained at a lower figure.

Interchangeable Tool Exports

Exports from the Netherlands

In 2018, the amount of interchangeable tools for hand tools exported from the Netherlands amounted to X tonnes, picking up by X% against the previous year. In general, the total exports indicated a measured increase from 2007 to 2018: its volume increased at an average annual rate of +X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2018 figures, interchangeable tool exports increased by +X% against 2015 indices. The growth pace was the most rapid in 2010 when exports increased by X% year-to-year. Over the period under review, interchangeable tool exports reached their maximum in 2018 and are likely to continue its growth in the immediate term.

In value terms, interchangeable tool exports stood at $X in 2018. Overall, the total exports indicated a prominent expansion from 2007 to 2018: its value increased at an average annual rate of +X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2018 figures, interchangeable tool exports increased by +X% against 2015 indices. The pace of growth appeared the most rapid in 2008 when exports increased by X% year-to-year. Exports peaked in 2018 and are likely to see steady growth in the near future.

Exports by Country

Germany (X tonnes) was the main destination for interchangeable tool exports from the Netherlands, with a X% share of total exports. Moreover, interchangeable tool exports to Germany exceeded the volume sent to the second major destination, France (X tonnes), twofold. Belgium (X tonnes) ranked third in terms of total exports with a X% share.

From 2007 to 2018, the average annual growth rate of volume to Germany stood at +X%. Exports to the other major destinations recorded the following average annual rates of exports growth: France (+X% per year) and Belgium (+X% per year).

In value terms, the largest markets for interchangeable tool exported from the Netherlands were Germany ($X), the U.S. ($X) and Belgium ($X), together accounting for X% of total exports. China, Singapore, France, Sweden, Italy, the UK, Poland, Spain and Finland lagged somewhat behind, together comprising a further X the main countries of destination, China recorded the highest rates of growth with regard to exports, over the last eleven years, while the other leaders experienced more modest paces of growth.

Export Prices by Country

The average interchangeable tool export price stood at $X per tonne in 2018, falling by -X% against the previous year. Over the period under review, the export price indicated a remarkable expansion from 2007 to 2018: its price increased at an average annual rate of +X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2008 an increase of X% y-o-y. In that year, the average export prices for interchangeable tools for hand tools reached their peak level of $X per tonne. From 2009 to 2018, the growth in terms of the average export prices for interchangeable tools for hand tools remained at a lower figure.

There were significant differences in the average prices for the major foreign markets. In 2018, the country with the highest price was the U.S. ($X per tonne), while the average price for exports to France ($X per tonne) was amongst the lowest.

From 2007 to 2018, the most notable rate of growth in terms of prices was recorded for supplies to China, while the prices for the other major destinations experienced more modest paces of growth.

Interchangeable Tool Imports

Imports into the Netherlands

In 2018, the amount of interchangeable tools for hand tools imported into the Netherlands amounted to X tonnes, reducing by -X% against the previous year. In general, interchangeable tool imports continue to indicate a mild setback. The most prominent rate of growth was recorded in 2012 with an increase of X% y-o-y. In that year, interchangeable tool imports reached their peak of X tonnes. From 2013 to 2018, the growth of interchangeable tool imports remained at a somewhat lower figure.

In value terms, interchangeable tool imports stood at $X in 2018. Overall, interchangeable tool imports continue to indicate a mild descent. The growth pace was the most rapid in 2017 when imports increased by X% year-to-year. Imports peaked at $X in 2013; however, from 2014 to 2018, imports failed to regain their momentum.

Imports by Country

China (X tonnes), Germany (X tonnes) and Japan (X tonnes) were the main suppliers of interchangeable tool imports to the Netherlands, with a combined X% share of total imports. Belgium, Taiwan, Chinese, the UK and India lagged somewhat behind, together accounting for a further X 2007 to 2018, the most notable rate of growth in terms of imports, amongst the main suppliers, was attained by India, while the other leaders experienced more modest paces of growth.

In value terms, Germany ($X) constituted the largest supplier of interchangeable tool to the Netherlands, comprising X% of total interchangeable tool imports. The second position in the ranking was occupied by Japan ($X), with a X% share of total imports. It was followed by China, with a X% share.

From 2007 to 2018, the average annual growth rate of value from Germany stood at -X%. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (+X% per year) and China (+X% per year).

Import Prices by Country

In 2018, the average interchangeable tool import price amounted to $X per tonne, surging by X% against the previous year. Over the period under review, the interchangeable tool import price continues to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2013 when the average import price increased by X% against the previous year. In that year, the average import prices for interchangeable tools for hand tools reached their peak level of $X per tonne. From 2014 to 2018, the growth in terms of the average import prices for interchangeable tools for hand tools remained at a lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2018, the country with the highest price was the UK ($X per tonne), while the price for China ($X per tonne) was amongst the lowest.

From 2007 to 2018, the most notable rate of growth in terms of prices was attained by Belgium, while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox AI Platform

Product coverage:
• Prodcom 25734014 - Tapping tools for working metal
• Prodcom 25734016 - Threading tools for working metal
• Prodcom 25734019 - Tapping or threading tools (excluding work and tool holders for machines or hand tools, for working metal)
• Prodcom 25734023 - Drilling tools with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for rock drilling)
• Prodcom 25734025 - Masonry drills with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for rock drilling)
• Prodcom 25734027 - Drilling tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
• Prodcom 25734031 - Drilling tools with working part of high speed steel, for working metal excluding work and tool holders for machines or hand tools - for rock drilling
• Prodcom 25734033 - Drilling tools with working part of materials other than diamond, agglomerated diamond or sintered metal carbide, f or working metal excluding with working part of high speed steel
• Prodcom 25734035 - Drilling tools (excluding work and tool holders for machines or hand tools, with working part of diamond or agglomerated diamond, for rock drilling, masonry drills, for working metal)
• Prodcom 25734037 - Boring or broaching tools with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for earth boring)
• Prodcom 25734044 - Boring tools for working metal, with working part of materials other than diamond or agglomerated diamond
• Prodcom 25734045 - Boring or broaching tools (excluding work and tool holders for machines or hand tools, with diamond or agglomerated diamond working parts, for working metal, for earth boring)
• Prodcom 25734048 - Broaching tools for working metal, with working part of materials other than diamond or agglomerated diamond
• Prodcom 25734050 - Milling tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
• Prodcom 25734061 - Shank type milling tools for working metal (excluding with working part of sintered metal carbide)
• Prodcom 25734065 -
• Prodcom 25734067 -
• Prodcom 25734069 - Milling tools (excluding for working metal)
• Prodcom 25734071 - Turning tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
• Prodcom 25734074 - Turning tools for working metal, with working part of materials other than cermets
• Prodcom 25734079 - Turning tools (excluding work and tool holders for machines or hand tools, for working metal)
• Prodcom 25734081 - Other interchangeable tools of CN .82.07 with working part of diamond
• Prodcom 25734083 - Screwdriver bits with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
• Prodcom 25734085 - Gear-cutting tools with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
• Prodcom 25734087 - Interchangeable hand tools with working part of sintered metal carbide excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
• Prodcom 25734089 - Interchangeable tools in other materials
• Prodcom 25736013 - Rock drilling or earth boring tools with working part of cermets
• Prodcom 25736018 - Rock-drilling or earth-boring tools, interchangeable, and parts therefor, with working parts of materials other than sintered metal carbide or cermets
• Prodcom 25736023 - Dies for drawing or extruding metal, with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
• Prodcom 25736024 - Dies for drawing or extruding metal (excluding unmounted plates, sticks, tips, rods, pellets, rings, etc. of sintered metal carbides or cermets)
• Prodcom 25736033 - Pressing, stamping or punching tools for working metal (excluding work and tool holders for machines or hand tools)
• Prodcom 25736039 - Pressing, stamping or punching tools (excluding work and tool holders for machines or hand tools, for working metal)

This report provides an in-depth analysis of the interchangeable tool market in the Netherlands. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Country coverage:
• Netherlands

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in the Netherlands
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
GLOSSARY AND SPECIFIC TERMS
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

2.1
KEY FINDINGS
2.2
MARKET TRENDS
3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCTS

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2007–2019
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2007–2019
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2019
Table 2:
Market Volume, In Physical Terms, 2007–2019
Table 3:
Market Value, 2007–2019
Table 4:
Per Capita Consumption In 2007–2019
Table 5:
Imports, In Physical Terms, By Country, 2007–2019
Table 6:
Imports, In Value Terms, By Country, 2007–2019
Table 7:
Import Prices, By Country Of Origin, 2007–2019
Table 8:
Exports, In Physical Terms, By Country, 2007–2019
Table 9:
Exports, In Value Terms, By Country, 2007–2019
Table 10:
Export Prices, By Country Of Destination, 2007–2019
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2007–2019
Figure 2:
Market Value, 2007–2019
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007–2019
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007–2019
Figure 5:
Trade Balance, In Physical Terms, 2007–2019
Figure 6:
Trade Balance, In Value Terms, 2007–2019
Figure 7:
Per Capita Consumption, 2007–2019
Figure 8:
Market Forecast To 2025
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2007–2019
Figure 21:
Production, In Value Terms, 2007–2019
Figure 22:
Imports, In Physical Terms, 2007–2019
Figure 23:
Imports, In Value Terms, 2007–2019
Figure 24:
Imports, In Physical Terms, By Country, 2019
Figure 25:
Imports, In Physical Terms, By Country, 2007–2019
Figure 26:
Imports, In Value Terms, By Country, 2007–2019
Figure 27:
Import Prices, By Country Of Origin, 2007–2019
Figure 28:
Exports, In Physical Terms, 2007–2019
Figure 29:
Exports, In Value Terms, 2007–2019
Figure 30:
Exports, In Physical Terms, By Country, 2019
Figure 31:
Exports, In Physical Terms, By Country, 2007–2019
Figure 32:
Exports, In Value Terms, By Country, 2007–2019
Figure 33:
Export Prices, By Country Of Destination, 2007–2019

Webinar: Global Chicken Meat Market - Statistics, Trends, and Outlook



Join our live webinar to get insights into the global chicken meat market.



Thursday, September 24th, 2020 @ 10:00 am ET


Register
Ready to Get Started?
We can help you conduct market research and write a report using the most reliable data