Report World - Sterile Surgical or Dental Adhesion Barriers - Market Analysis, Forecast, Size, Trends and Insights for 499$
Latest Report Update: Oct 1, 2022

World - Sterile Surgical or Dental Adhesion Barriers - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)

Overview of the Global Market for Sterile Surgical Or Dental Adhesion Barriers

Market Size for Sterile Surgical Or Dental Adhesion Barriers

In 2021, the global sterile medical adhesion barrier market increased by X% to $X for the first time since 2017, thus ending a three-year declining trend. In general, consumption, however, recorded a abrupt shrinkage. Global consumption peaked at $X in 2012; however, from 2013 to 2021, consumption stood at a somewhat lower figure.

Production of Sterile Surgical Or Dental Adhesion Barriers

In value terms, sterile medical adhesion barrier production expanded notably to $X in 2021 estimated in export price. Overall, production, however, showed a noticeable curtailment. Global production peaked at $X in 2012; however, from 2013 to 2021, production stood at a somewhat lower figure.

Exports of Sterile Surgical Or Dental Adhesion Barriers

Exports

Global sterile medical adhesion barrier exports was estimated at X tons in 2021, increasing by X% on the year before. The total export volume increased at an average annual rate of +X% over the period from 2012 to 2021; the trend pattern remained consistent, with only minor fluctuations in certain years. The growth pace was the most rapid in 2013 with an increase of X% against the previous year. Over the period under review, the global exports reached the peak figure at X tons in 2019; however, from 2020 to 2021, the exports stood at a somewhat lower figure.

In value terms, sterile medical adhesion barrier exports expanded remarkably to $X in 2021. The total export value increased at an average annual rate of +X% over the period from 2012 to 2021; the trend pattern remained consistent, with only minor fluctuations being observed throughout the analyzed period. As a result, the exports reached the peak and are likely to continue growth in the immediate term.

Exports by Country

The United States (X tons) and Belgium (X tons) represented roughly X% of total exports in 2021. Switzerland (X tons) held the next position in the ranking, followed by Germany (X tons), the Netherlands (X tons) and Spain (X tons). All these countries together held approx. X% share of total exports. The following exporters - the UK (X tons), Poland (X tons), India (X tons), Austria (X tons), Denmark (X tons), Singapore (X tons) and France (X tons) - together made up X% of total exports.

From 2012 to 2021, the most notable rate of growth in terms of shipments, amongst the main exporting countries, was attained by Poland (with a CAGR of +X%), while the other global leaders experienced more modest paces of growth.

In value terms, the United States ($X), Belgium ($X) and Germany ($X) constituted the countries with the highest levels of exports in 2021, with a combined X% share of global exports. These countries were followed by Switzerland, Austria, the Netherlands, Spain, Singapore, Denmark, the UK, Poland, France and India, which together accounted for a further X the main exporting countries, Poland, with a CAGR of +X%, recorded the highest growth rate of the value of exports, over the period under review, while shipments for the other global leaders experienced more modest paces of growth.

Export Prices by Country

The average sterile medical adhesion barrier export price stood at $X per ton in 2021, increasing by X% against the previous year. In general, the export price continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 when the average export price increased by X%. Over the period under review, the average export prices attained the maximum in 2021 and is likely to see steady growth in the near future.

There were significant differences in the average prices amongst the major exporting countries. In 2021, the country with the highest price was Austria ($X per ton), while India ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by the Netherlands (+X%), while the other global leaders experienced more modest paces of growth.

Imports of Sterile Surgical Or Dental Adhesion Barriers

Imports

In 2021, approx. X tons of sterile surgical or dental adhesion barriers were imported worldwide; declining by -X% against the year before. The total import volume increased at an average annual rate of +X% over the period from 2012 to 2021; the trend pattern remained consistent, with only minor fluctuations in certain years. The most prominent rate of growth was recorded in 2016 with an increase of X% against the previous year. Global imports peaked at X tons in 2019; however, from 2020 to 2021, imports remained at a lower figure.

In value terms, sterile medical adhesion barrier imports totaled $X in 2021. The total import value increased at an average annual rate of +X% from 2012 to 2021; the trend pattern remained relatively stable, with only minor fluctuations in certain years. The most prominent rate of growth was recorded in 2013 when imports increased by X%. Global imports peaked in 2021 and are likely to see gradual growth in years to come.

Imports by Country

In 2021, Belgium (X tons), distantly followed by Spain (X tons), the Netherlands (X tons), Poland (X tons) and Singapore (X tons) represented the key importers of sterile surgical or dental adhesion barriers, together making up X% of total imports. The United States (X tons), the UK (X tons), Italy (X tons), Austria (X tons), Germany (X tons), France (X tons), Japan (X tons) and Australia (X tons) followed a long way behind the leaders.

Belgium experienced a relatively flat trend pattern with regard to volume of imports of sterile surgical or dental adhesion barriers. At the same time, the Netherlands (+X%), Japan (+X%), Singapore (+X%), Poland (+X%), Italy (+X%), the United States (+X%), Australia (+X%) and Spain (+X%) displayed positive paces of growth. Moreover, the Netherlands emerged as the fastest-growing importer imported in the world, with a CAGR of +X% from 2012-2021. Austria and France experienced a relatively flat trend pattern. By contrast, Germany (-X%) and the UK (-X%) illustrated a downward trend over the same period. The Netherlands (+X p.p.), Singapore (+X p.p.), Poland (+X p.p.), Italy (+X p.p.), the United States (+X p.p.) and Japan (+X p.p.) significantly strengthened its position in terms of the global imports, while Belgium, Germany and the UK saw its share reduced by -X%, -X% and -X% from 2012 to 2021, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest sterile medical adhesion barrier importing markets worldwide were Belgium ($X), the United States ($X) and Germany ($X), together accounting for X% of global imports. These countries were followed by Japan, Singapore, the Netherlands, Italy, the UK, France, Spain, Australia, Poland and Austria, which together accounted for a further X Netherlands, with a CAGR of +X%, saw the highest rates of growth with regard to the value of imports, in terms of the main importing countries over the period under review, while purchases for the other global leaders experienced more modest paces of growth.

Import Prices by Country

In 2021, the average sterile medical adhesion barrier import price amounted to $X per ton, increasing by X% against the previous year. Over the last nine-year period, it increased at an average annual rate of +X%. The most prominent rate of growth was recorded in 2020 when the average import price increased by X%. Global import price peaked in 2021 and is expected to retain growth in the immediate term.

Prices varied noticeably country of destination: the country with the highest price was Germany ($X per ton), while Poland ($X per ton) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Germany (+X%), while the other global leaders experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

Base Year Historical Period Forecast Period Units
2022 2012-2022 2023-2030 US$, Tons

Frequently Asked Questions (FAQ) :

What are the largest markets for sterile surgical or dental adhesion barriers in the world?
+
The country with the largest volume of sterile medical adhesion barrier consumption was China, accounting for 34% of total volume. Moreover, sterile medical adhesion barrier consumption in China exceeded the figures recorded by the second-largest consumer, India, twofold. The third position in this ranking was taken by the United States, with a 9.2% share.
What are the largest producers of sterile surgical or dental adhesion barriers in the world?
+
The country with the largest volume of sterile medical adhesion barrier production was China, accounting for 34% of total volume. Moreover, sterile medical adhesion barrier production in China exceeded the figures recorded by the second-largest producer, India, twofold. The United States ranked third in terms of total production with a 12% share.
What are the leading exporters of sterile surgical or dental adhesion barriers in the world?
+
In value terms, the United States, Belgium and Germany appeared to be the countries with the highest levels of exports in 2021, with a combined 57% share of global exports. These countries were followed by Switzerland, Austria, the Netherlands, Spain, Singapore, Denmark, the UK, Poland, France and India, which together accounted for a further 33%.
What are the leading importers of sterile surgical or dental adhesion barriers in the world?
+
In value terms, Belgium, the United States and Germany appeared to be the countries with the highest levels of imports in 2021, together accounting for 41% of global imports. These countries were followed by Japan, Singapore, the Netherlands, Italy, the UK, France, Spain, Australia, Poland and Austria, which together accounted for a further 32%.
What is the average export price for sterile surgical or dental adhesion barriers in the world?
+
In 2021, the average sterile medical adhesion barrier export price amounted to $329,431 per ton, surging by 4.3% against the previous year.
What is the average import price for sterile surgical or dental adhesion barriers in the world?
+
The average sterile medical adhesion barrier import price stood at $285,940 per ton in 2021, growing by 8.5% against the previous year.

This report provides an in-depth analysis of the global market for sterile medical adhesion barrier. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Product coverage:
• Prodcom 32505030 - Sterile surgical or dental adhesion barriers, whether or not absorbable, sterile suture materials, including sterile absorbable surgical or dental yarns (excluding catgut), sterile tissue adhesives for surgical wound closure, sterile laminaria and sterile laminaria tents, sterile absorbable surgical or dental haemostatics
• Prodcom 21202430 - Sterile surgical catgut

Data coverage:
• Global market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Global production, split by region and country
• Global trade (exports and imports)
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
REPORT DESCRIPTION
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
CONSUMPTION BY COUNTRY
3.3
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCT

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. GLOBAL PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
7.2
PRODUCTION BY COUNTRY
8. GLOBAL IMPORTS

The Largest Importers on The Market and How They Succeed

8.1
IMPORTS FROM 2012–2022
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. GLOBAL EXPORTS

The Largest Exporters on The Market and How They Succeed

9.1
EXPORTS FROM 2012–2022
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

11. COUNTRY PROFILES

The Largest Markets And Their Profiles

United States
China
Japan
Germany
United Kingdom
France
Brazil
Italy
Russian Federation
India
Canada
Australia
Republic of Korea
Spain
Mexico
Indonesia
Netherlands
Turkey
Saudi Arabia
Switzerland
Sweden
Nigeria
Poland
Belgium
Argentina
Norway
Austria
Thailand
United Arab Emirates
Colombia
Denmark
South Africa
Malaysia
Israel
Singapore
Egypt
Philippines
Finland
Chile
Ireland
Pakistan
Greece
Portugal
Kazakhstan
Algeria
Czech Republic
Qatar
Peru
Romania
Vietnam
LIST OF TABLES
Table 1:
Key Findings In 2022
Table 2:
Market Volume, In Physical Terms, 2012–2022
Table 3:
Market Value, 2012–2022
Table 4:
Per Capita Consumption, By Country, 2018–2022
Table 5:
Production, In Physical Terms, By Country, 2012–2022
Table 6:
Imports, In Physical Terms, By Country, 2012–2022
Table 7:
Imports, In Value Terms, By Country, 2012–2022
Table 8:
Import Prices, By Country Of Destination, 2012–2022
Table 9:
Exports, In Physical Terms, By Country, 2012–2022
Table 10:
Exports, In Value Terms, By Country, 2012–2022
Table 11:
Export Prices, By Country Of Origin, 2012–2022
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2012–2022
Figure 2:
Market Value, 2012–2022
Figure 3:
Consumption, By Country, 2022
Figure 4:
Market Forecast To 2030
Figure 5:
Products: Market Size And Growth, By Type
Figure 6:
Products: Average Per Capita Consumption, By Type
Figure 7:
Products: Exports And Growth, By Type
Figure 8:
Products: Export Prices And Growth, By Type
Figure 9:
Production Volume And Growth
Figure 10:
Exports And Growth
Figure 11:
Export Prices And Growth
Figure 12:
Market Size And Growth
Figure 13:
Per Capita Consumption
Figure 14:
Imports And Growth
Figure 15:
Import Prices
Figure 16:
Production, In Physical Terms, 2012–2022
Figure 17:
Production, In Value Terms, 2012–2022
Figure 18:
Production, By Country, 2022
Figure 19:
Production, In Physical Terms, By Country, 2012–2022
Figure 20:
Imports, In Physical Terms, 2012–2022
Figure 21:
Imports, In Value Terms, 2012–2022
Figure 22:
Imports, In Physical Terms, By Country, 2022
Figure 23:
Imports, In Physical Terms, By Country, 2012–2022
Figure 24:
Imports, In Value Terms, By Country, 2012–2022
Figure 25:
Import Prices, By Country, 2012–2022
Figure 26:
Exports, In Physical Terms, 2012–2022
Figure 27:
Exports, In Value Terms, 2012–2022
Figure 28:
Exports, In Physical Terms, By Country, 2022
Figure 29:
Exports, In Physical Terms, By Country, 2012–2022
Figure 30:
Exports, In Value Terms, By Country, 2012–2022
Figure 31:
Export Prices, 2012–2022
Webinar: Decarbonisation and Your Business Strategy - Zero Net Carbon Buildings

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, February 22nd, 2022 @ 04:00 pm ET

Webinar: Decarbonisation and Your Business Strategy - Tools and Marketplaces

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, February 8th, 2022 @ 04:00 pm ET

Webinar: Decarbonisation and Your Business Strategy - Steps and Practices

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, January 25th, 2022 @ 04:00 pm ET