Report U.S. - Motorcycles, fitted with a motor, with reciprocating internal combustion piston engine of a cylinder capacity <= 50 cm³ - Market Analysis, Forecast, Size, Trends and Insights for 499$
Latest Report Update: Mar 1, 2023

U.S. - Motorcycles, fitted with a motor, with reciprocating internal combustion piston engine of a cylinder capacity <= 50 cm³ - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)

U.S.: Market for Motorcycles and Cycles With an Auxiliary Motor 2022

Market Size for Motorcycles and Cycles With an Auxiliary Motor in the U.S.

In 2021, the U.S. market for motorcycles and cycles with an auxiliary motor was finally on the rise to reach $X for the first time since 2012, thus ending a eight-year declining trend. Overall, consumption, however, showed a abrupt decline. Over the period under review, the market reached the peak level at $X in 2012; however, from 2013 to 2021, consumption stood at a somewhat lower figure.

Production of Motorcycles and Cycles With an Auxiliary Motor in the U.S.

In value terms, production of motorcycles and cycles with an auxiliary motor rose remarkably to $X in 2021. Over the period under review, production, however, showed a deep contraction. Over the period under review, production of attained the peak level at $X in 2012; however, from 2013 to 2021, production stood at a somewhat lower figure.

Exports of Motorcycles and Cycles With an Auxiliary Motor

Exports from the U.S.

In 2021, shipments abroad of motorcycles and cycles with an auxiliary motor increased by 12% to X units, rising for the second year in a row after two years of decline. Over the period under review, exports, however, showed a abrupt descent. The most prominent rate of growth was recorded in 2020 with an increase of 17%. The exports peaked at X units in 2013; however, from 2014 to 2021, the exports remained at a lower figure.

In value terms, exports of motorcycles and cycles with an auxiliary motor skyrocketed to $X in 2021. In general, exports, however, saw a abrupt downturn. The most prominent rate of growth was recorded in 2013 with an increase of 17% against the previous year. As a result, the exports reached the peak of $X. From 2014 to 2021, the growth of the exports of remained at a lower figure.

Exports by Country

Germany (X units), Canada (X units) and the UK (X units) were the main destinations of exports of motorcycles and cycles with an auxiliary motor from the United States, with a combined 37% share of total exports. These countries were followed by Australia, the Netherlands, Thailand, Lithuania, New Zealand, Poland, Ukraine, the United Arab Emirates, France and Saudi Arabia, which together accounted for a further 43%.

From 2012 to 2021, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Poland (with a CAGR of +11.2%), while the other leaders experienced more modest paces of growth.

In value terms, Germany ($X), Australia ($X) and the UK ($X) appeared to be the largest markets for motorcycles and cycles with an auxiliary motor exported from the United States worldwide, with a combined 38% share of total exports. These countries were followed by Thailand, the Netherlands, New Zealand, Saudi Arabia, Lithuania, Poland, France, Ukraine, Canada and the United Arab Emirates, which together accounted for a further 41%.

In terms of the main countries of destination, Poland, with a CAGR of +13.0%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average export price for motorcycles and cycles with an auxiliary motor stood at $X per unit in 2021, picking up by 2.7% against the previous year. In general, the export price saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2019 when the average export price increased by 14%. As a result, the export price reached the peak level of $X per unit. From 2020 to 2021, the the average export prices remained at a lower figure.

Prices varied noticeably country of destination: the country with the highest price was Saudi Arabia ($X per unit), while the average price for exports to Canada ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to Saudi Arabia (+12.7%), while the prices for the other major destinations experienced more modest paces of growth.

Imports of Motorcycles and Cycles With an Auxiliary Motor

Imports into the U.S.

Imports of motorcycles and cycles with an auxiliary motor into the United States fell to X units in 2021, dropping by -6.9% against the previous year's figure. Over the period under review, imports continue to indicate a relatively flat trend pattern. The growth pace was the most rapid in 2020 with an increase of 60% against the previous year. As a result, imports attained the peak of X units, and then shrank in the following year.

In value terms, imports of motorcycles and cycles with an auxiliary motor expanded sharply to $X in 2021. Overall, imports recorded a pronounced slump. Over the period under review, imports of hit record highs at $X in 2012; however, from 2013 to 2021, imports stood at a somewhat lower figure.

Imports by Country

In 2021, China (X units) constituted the largest motorcycles and cycles with an auxiliary motor supplier to the United States, with a 80% share of total imports. Moreover, imports of motorcycles and cycles with an auxiliary motor from China exceeded the figures recorded by the second-largest supplier, Japan (X units), sixfold. Taiwan (Chinese) (X units) ranked third in terms of total imports with a 4.4% share.

From 2012 to 2021, the average annual rate of growth in terms of volume from China was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Japan (+3.7% per year) and Taiwan (Chinese) (-0.7% per year).

In value terms, China ($X), Japan ($X) and Austria ($X) were the largest motorcycles and cycles with an auxiliary motor suppliers to the United States, with a combined 91% share of total imports.

In terms of the main suppliers, Austria, with a CAGR of +11.0%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced mixed trend patterns.

Import Prices by Country

In 2021, the average import price for motorcycles and cycles with an auxiliary motor amounted to $X per unit, increasing by 21% against the previous year. In general, the import price, however, recorded a pronounced slump. The most prominent rate of growth was recorded in 2014 an increase of 36% against the previous year. As a result, import price attained the peak level of $X per unit. From 2015 to 2021, the average import prices remained at a somewhat lower figure.

There were significant differences in the average prices amongst the major supplying countries. In 2021, the country with the highest price was Austria ($X per unit), while the price for China ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Austria (+0.4%), while the prices for the other major suppliers experienced a decline.

Source: IndexBox Market Intelligence Platform

Base Year Historical Period Forecast Period Units
2022 2012-2022 2023-2030 US$, Tons

Frequently Asked Questions (FAQ) :

What are the largest markets for motorcycles and cycles with an auxiliary motor in the world?
+
The countries with the highest volumes of consumption in 2021 were China, the United States and India, with a combined 27% share of global consumption. Morocco, Japan, the Netherlands, Russia, Germany, Indonesia, Pakistan, Brazil, Italy and France lagged somewhat behind, together accounting for a further 30%.
What are the largest producers of motorcycles and cycles with an auxiliary motor in the world?
+
China constituted the country with the largest volume of production of motorcycles and cycles with an auxiliary motor, comprising approx. 38% of total volume. Moreover, production of motorcycles and cycles with an auxiliary motor in China exceeded the figures recorded by the second-largest producer, Japan, fivefold. The third position in this ranking was held by India, with a 6.3% share.
What are the leading suppliers of motorcycles and cycles with an auxiliary motor to the U.S.?
+
In value terms, the largest motorcycles and cycles with an auxiliary motor suppliers to the United States were China, Japan and Austria, with a combined 91% share of total imports.
What are the leading importers of motorcycles and cycles with an auxiliary motor from the U.S.?
+
In value terms, Germany, Australia and the UK were the largest markets for motorcycles and cycles with an auxiliary motor exported from the United States worldwide, together comprising 38% of total exports. These countries were followed by Thailand, the Netherlands, New Zealand, Saudi Arabia, Lithuania, Poland, France, Ukraine, Canada and the United Arab Emirates, which together accounted for a further 41%.
What is the average export price for motorcycles and cycles with an auxiliary motor in the U.S.?
+
In 2021, the average export price for motorcycles and cycles with an auxiliary motor amounted to $5,334 per unit, picking up by 2.7% against the previous year.
What is the average import price for motorcycles and cycles with an auxiliary motor in the U.S.?
+
The average import price for motorcycles and cycles with an auxiliary motor stood at $593 per unit in 2021, surging by 21% against the previous year.

This report provides an in-depth analysis of the market for motorcycles and cycles with an auxiliary motor in the U.S.. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Product coverage:
• Prodcom 30911100 - Motorcycles, and cycles fitted with an auxiliary motor, with an engine capacity . .50 cm.
Country coverage:
• United States

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in the U.S.
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
REPORT DESCRIPTION
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCT

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2012–2022
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2012–2022
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2022
Table 2:
Market Volume, In Physical Terms, 2012–2022
Table 3:
Market Value, 2012–2022
Table 4:
Per Capita Consumption In 2007-2022
Table 5:
Imports, In Physical Terms, By Country, 2012–2022
Table 6:
Imports, In Value Terms, By Country, 2012–2022
Table 7:
Import Prices, By Country Of Origin, 2012–2022
Table 8:
Exports, In Physical Terms, By Country, 2012–2022
Table 9:
Exports, In Value Terms, By Country, 2012–2022
Table 10:
Export Prices, By Country Of Destination, 2012–2022
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2012–2022
Figure 2:
Market Value, 2012–2022
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007-2022
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007-2022
Figure 5:
Trade Balance, In Physical Terms, 2007-2022
Figure 6:
Trade Balance, In Value Terms, 2007-2022
Figure 7:
Per Capita Consumption, 2007-2022
Figure 8:
Market Forecast To 2030
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2012–2022
Figure 21:
Production, In Value Terms, 2012–2022
Figure 22:
Imports, In Physical Terms, 2012–2022
Figure 23:
Imports, In Value Terms, 2012–2022
Figure 24:
Imports, In Physical Terms, By Country, 2022
Figure 25:
Imports, In Physical Terms, By Country, 2012–2022
Figure 26:
Imports, In Value Terms, By Country, 2012–2022
Figure 27:
Import Prices, By Country Of Origin, 2012–2022
Figure 28:
Exports, In Physical Terms, 2012–2022
Figure 29:
Exports, In Value Terms, 2012–2022
Figure 30:
Exports, In Physical Terms, By Country, 2022
Figure 31:
Exports, In Physical Terms, By Country, 2012–2022
Figure 32:
Exports, In Value Terms, By Country, 2012–2022
Figure 33:
Export Prices, By Country Of Destination, 2012–2022
Webinar: Decarbonisation and Your Business Strategy - Zero Net Carbon Buildings

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, February 22nd, 2022 @ 04:00 pm ET

Webinar: Decarbonisation and Your Business Strategy - Tools and Marketplaces

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, February 8th, 2022 @ 04:00 pm ET

Webinar: Decarbonisation and Your Business Strategy - Steps and Practices

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, January 25th, 2022 @ 04:00 pm ET