Report Thailand - Machines for Treating Metal, Having Individual Functions - Market Analysis, Forecast, Size, Trends and Insights for 499$
Latest Report Update: Sep 30, 2022

Thailand - Machines for Treating Metal, Having Individual Functions - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)

Thailand: Metal Treating Machine Market 2022

Metal Treating Machine Market Size in Thailand

The Thai metal treating machine market shrank modestly to $X in 2021, with a decrease of -X% against the previous year. In general, the total consumption indicated a notable increase from 2012 to 2021: its value increased at an average annual rate of +X% over the last nine years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2021 figures, consumption decreased by -X% against 2019 indices. As a result, consumption attained the peak level of $X. From 2020 to 2021, the growth of the market remained at a lower figure.

Metal Treating Machine Production in Thailand

In value terms, metal treating machine production fell remarkably to $X in 2021 estimated in export price. Over the period under review, production saw a pronounced decline. The most prominent rate of growth was recorded in 2016 when the production volume increased by X% against the previous year. Over the period under review, production reached the peak level at $X in 2020, and then reduced sharply in the following year.

Metal Treating Machine Exports

Exports from Thailand

In 2021, overseas shipments of machines for treating metal, having individual functions were finally on the rise to reach X units for the first time since 2017, thus ending a three-year declining trend. In general, exports, however, saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 when exports increased by X% against the previous year. As a result, the exports reached the peak of X units. From 2018 to 2021, the growth of the exports remained at a lower figure.

In value terms, metal treating machine exports soared to $X in 2021. Overall, exports, however, continue to indicate a noticeable setback. The pace of growth appeared the most rapid in 2017 with an increase of X%. As a result, the exports attained the peak of $X. From 2018 to 2021, the growth of the exports failed to regain momentum.

Exports by Country

Singapore (X units) was the main destination for metal treating machine exports from Thailand, accounting for a X% share of total exports. Moreover, metal treating machine exports to Singapore exceeded the volume sent to the second major destination, Turkey (X units), threefold. Indonesia (X units) ranked third in terms of total exports with an X% share.

From 2012 to 2021, the average annual rate of growth in terms of volume to Singapore totaled +X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Turkey (+X% per year) and Indonesia (+X% per year).

In value terms, Singapore ($X) emerged as the key foreign market for metal treating machine exports from Thailand, comprising X% of total exports. The second position in the ranking was taken by the United States ($X), with a X% share of total exports. It was followed by China, with a X% share.

From 2012 to 2021, the average annual rate of growth in terms of value to Singapore totaled +X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the United States (+X% per year) and China (+X% per year).

Export Prices by Country

In 2021, the average metal treating machine export price amounted to $X per unit, dropping by -X% against the previous year. In general, the export price recorded a pronounced downturn. The pace of growth was the most pronounced in 2019 an increase of X% against the previous year. As a result, the export price reached the peak level of $X per unit. From 2020 to 2021, the the average export prices remained at a somewhat lower figure.

Prices varied noticeably country of destination: the country with the highest price was China ($X per unit), while the average price for exports to Mexico ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was recorded for supplies to China (+X%), while the prices for the other major destinations experienced mixed trend patterns.

Metal Treating Machine Imports

Imports into Thailand

In 2021, the amount of machines for treating metal, having individual functions imported into Thailand skyrocketed to X units, with an increase of X% against the year before. In general, imports saw a tangible increase. The most prominent rate of growth was recorded in 2015 with an increase of X% against the previous year. Over the period under review, imports hit record highs at X units in 2019; however, from 2020 to 2021, imports stood at a somewhat lower figure.

In value terms, metal treating machine imports rose notably to $X in 2021. Over the period under review, imports saw a relatively flat trend pattern. The pace of growth was the most pronounced in 2019 with an increase of X%. As a result, imports reached the peak of $X. From 2020 to 2021, the growth of imports remained at a somewhat lower figure.

Imports by Country

In 2021, China (X units) constituted the largest metal treating machine supplier to Thailand, accounting for a X% share of total imports. Moreover, metal treating machine imports from China exceeded the figures recorded by the second-largest supplier, Taiwan (Chinese) (X units), tenfold.

From 2012 to 2021, the average annual rate of growth in terms of volume from China stood at +X%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (+X% per year) and Germany (-X% per year).

In value terms, China ($X) constituted the largest supplier of metal treating machine to Thailand, comprising X% of total imports. The second position in the ranking was taken by Taiwan (Chinese) ($X), with a X% share of total imports.

From 2012 to 2021, the average annual rate of growth in terms of value from China stood at +X%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (+X% per year) and Germany (+X% per year).

Import Prices by Country

The average metal treating machine import price stood at $X per unit in 2021, declining by -X% against the previous year. Over the period under review, the import price saw a noticeable descent. The pace of growth appeared the most rapid in 2020 an increase of X%. Over the period under review, average import prices attained the peak figure at $X per unit in 2014; however, from 2015 to 2021, import prices failed to regain momentum.

Prices varied noticeably countryorigin: the country with the highest price was Germany ($X per unit), while the price for China ($X per unit) was amongst the lowest.

From 2012 to 2021, the most notable rate of growth in terms of prices was attained by Germany (+X%), while the prices for the other major suppliers experienced mixed trend patterns.

Source: IndexBox Market Intelligence Platform

Base Year Historical Period Forecast Period Units
2022 2012-2022 2023-2030 US$, Tons

Frequently Asked Questions (FAQ) :

What are the largest markets for machines for treating metal, having individual functions in the world?
+
The countries with the highest volumes of consumption in 2021 were China, the United States and India, together comprising 39% of global consumption. Indonesia, Japan, Poland, Singapore, Brazil, Mexico, Italy, Canada, Spain and South Korea lagged somewhat behind, together accounting for a further 37%.
What are the largest producers of machines for treating metal, having individual functions in the world?
+
The countries with the highest volumes of production in 2021 were China, the United States and India, with a combined 45% share of global production. Italy, Japan, Brazil, Poland, Austria, Canada, Mexico, South Korea, Saudi Arabia and Spain lagged somewhat behind, together accounting for a further 41%.
What are the leading suppliers of machines for treating metal, having individual functions to Thailand?
+
In value terms, China constituted the largest supplier of metal treating machine to Thailand, comprising 43% of total imports. The second position in the ranking was held by Taiwan Chinese), with a 15% share of total imports.
What are the leading importers of machines for treating metal, having individual functions from Thailand?
+
In value terms, Singapore emerged as the key foreign market for metal treating machine exports from Thailand, comprising 40% of total exports. The second position in the ranking was held by the United States, with a 15% share of total exports. It was followed by China, with a 14% share.
What is the average export price for machines for treating metal, having individual functions in Thailand?
+
The average metal treating machine export price stood at $11,820 per unit in 2021, which is down by -21.4% against the previous year.
What is the average import price for machines for treating metal, having individual functions in Thailand?
+
The average metal treating machine import price stood at $313 per unit in 2021, reducing by -20.5% against the previous year.

This report provides an in-depth analysis of the metal treating machine market in Thailand. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.


Product coverage:
• Prodcom 28993905 - Machines for treating metal, having individual functions (excluding robots)
Country coverage:
• Thailand

Data coverage:
• Market volume and value
• Per Capita consumption
• Forecast of the market dynamics in the medium term
• Trade (exports and imports) in Thailand
• Export and import prices
• Market trends, drivers and restraints
• Key market players and their profiles

Reasons to buy this report:
• Take advantage of the latest data
• Find deeper insights into current market developments
• Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:
1. How to diversify your business and benefit from new market opportunities
2. How to load your idle production capacity
3. How to boost your sales on overseas markets
4. How to increase your profit margins
5. How to make your supply chain more sustainable
6. How to reduce your production and supply chain costs
7. How to outsource production to other countries
8. How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
1. INTRODUCTION

Making Data-Driven Decisions to Grow Your Business

1.1
REPORT DESCRIPTION
1.2
RESEARCH METHODOLOGY AND AI PLATFORM
1.3
DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
1.4
REPORT DESCRIPTION
2. EXECUTIVE SUMMARY

A Quick Overview of Market Performance

3. MARKET OVERVIEW

Understanding the Current State of The Market and Its Prospects

3.1
MARKET SIZE
3.2
MARKET STRUCTURE
3.3
TRADE BALANCE
3.4
PER CAPITA CONSUMPTION
3.5
MARKET FORECAST TO 2030
4. MOST PROMISING PRODUCT

Finding New Products to Diversify Your Business

4.1
TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
4.2
BEST-SELLING PRODUCTS
4.3
MOST CONSUMED PRODUCT
4.4
MOST TRADED PRODUCT
4.5
MOST PROFITABLE PRODUCT FOR EXPORT
5. MOST PROMISING SUPPLYING COUNTRIES

Choosing the Best Countries to Establish Your Sustainable Supply Chain

5.1
TOP COUNTRIES TO SOURCE YOUR PRODUCT
5.2
TOP PRODUCING COUNTRIES
5.3
TOP EXPORTING COUNTRIES
5.4
LOW-COST EXPORTING COUNTRIES
6. MOST PROMISING OVERSEAS MARKETS

Choosing the Best Countries to Boost Your Exports

6.1
TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
6.2
TOP CONSUMING MARKETS
6.3
UNSATURATED MARKETS
6.4
TOP IMPORTING MARKETS
6.5
MOST PROFITABLE MARKETS
7. PRODUCTION

The Latest Trends and Insights into The Industry

7.1
PRODUCTION VOLUME AND VALUE
8. IMPORTS

The Largest Import Supplying Countries

8.1
IMPORTS FROM 2012–2022
8.2
IMPORTS BY COUNTRY
8.3
IMPORT PRICES BY COUNTRY
9. EXPORTS

The Largest Destinations for Exports

9.1
EXPORTS FROM 2012–2022
9.2
EXPORTS BY COUNTRY
9.3
EXPORT PRICES BY COUNTRY
10. PROFILES OF MAJOR PRODUCERS

The Largest Producers on The Market and Their Profiles

LIST OF TABLES
Table 1:
Key Findings In 2022
Table 2:
Market Volume, In Physical Terms, 2012–2022
Table 3:
Market Value, 2012–2022
Table 4:
Per Capita Consumption In 2007-2022
Table 5:
Imports, In Physical Terms, By Country, 2012–2022
Table 6:
Imports, In Value Terms, By Country, 2012–2022
Table 7:
Import Prices, By Country Of Origin, 2012–2022
Table 8:
Exports, In Physical Terms, By Country, 2012–2022
Table 9:
Exports, In Value Terms, By Country, 2012–2022
Table 10:
Export Prices, By Country Of Destination, 2012–2022
LIST OF FIGURES
Figure 1:
Market Volume, In Physical Terms, 2012–2022
Figure 2:
Market Value, 2012–2022
Figure 3:
Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2007-2022
Figure 4:
Market Structure – Domestic Supply vs. Imports, In Value Terms, 2007-2022
Figure 5:
Trade Balance, In Physical Terms, 2007-2022
Figure 6:
Trade Balance, In Value Terms, 2007-2022
Figure 7:
Per Capita Consumption, 2007-2022
Figure 8:
Market Forecast To 2030
Figure 9:
Products: Market Size And Growth, By Type
Figure 10:
Products: Average Per Capita Consumption, By Type
Figure 11:
Products: Exports And Growth, By Type
Figure 12:
Products: Export Prices And Growth, By Type
Figure 13:
Production Volume And Growth
Figure 14:
Exports And Growth
Figure 15:
Export Prices And Growth
Figure 16:
Market Size And Growth
Figure 17:
Per Capita Consumption
Figure 18:
Imports And Growth
Figure 19:
Import Prices
Figure 20:
Production, In Physical Terms, 2012–2022
Figure 21:
Production, In Value Terms, 2012–2022
Figure 22:
Imports, In Physical Terms, 2012–2022
Figure 23:
Imports, In Value Terms, 2012–2022
Figure 24:
Imports, In Physical Terms, By Country, 2022
Figure 25:
Imports, In Physical Terms, By Country, 2012–2022
Figure 26:
Imports, In Value Terms, By Country, 2012–2022
Figure 27:
Import Prices, By Country Of Origin, 2012–2022
Figure 28:
Exports, In Physical Terms, 2012–2022
Figure 29:
Exports, In Value Terms, 2012–2022
Figure 30:
Exports, In Physical Terms, By Country, 2022
Figure 31:
Exports, In Physical Terms, By Country, 2012–2022
Figure 32:
Exports, In Value Terms, By Country, 2012–2022
Figure 33:
Export Prices, By Country Of Destination, 2012–2022
Webinar: Decarbonisation and Your Business Strategy - Zero Net Carbon Buildings

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, February 22nd, 2022 @ 04:00 pm ET

Webinar: Decarbonisation and Your Business Strategy - Tools and Marketplaces

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, February 8th, 2022 @ 04:00 pm ET

Webinar: Decarbonisation and Your Business Strategy - Steps and Practices

Join us in our latest webinar series to get insights from industry experts and engage in a productive discussion!



Tuesday, January 25th, 2022 @ 04:00 pm ET